clearaudio ACLASTROBELIGHT Speed Light User Manual

June 6, 2024
clearaudio

clearaudio RB 250 Arms Require RB 300 End Stub- logo

Speed Light
User manual
Bedienungsanleitungclearaudio ACLASTROBELIGHT Speed Light- Speed
Light

Picture similar

– Usage of the Speed Light –

  1. Please put the Stroboscope Testrecord on your turntable.

  2. To adjust the optimal speed for the turntable with the Speed Light, hold the Speed Light about 1,97 – 3,94 inch (5 – 10 cm) over the Stroboscope Testrecord (picture 1).
    clearaudio ACLASTROBELIGHT Speed Light- Speed LightfPic. 1: Distance between Speed Light and Stroboscope Testrecord

  3. When the black lines stop in the blue light and do not move visible, you have the optimal speed.
    (33 1/3rpm outside stribe, 45rpm inside stribe) (picture 1)
    – If the lines move around clockwise, the drive is too fast.
    – When the lines clearly move anticlockwise, the drive is too slowly.

  4. For the optimal speed adjustment we recommend our Smart Syncro (Art.No. EL024), so you can exactly adjust the speed on the Hz.

  5. If the intensity of the light reduces, please change the battery. Use the exact battery type: V23GA – 12V – Alkaline

– Attention –

Open the Speed Light:
If the battery is flat, please open the Speed Light with a thin screwdriver.
You can easily push it in and turn it (picture 2).
Take care about the polarity of the battery when changing (picture 3).
The blue LED is not a laser diode!
Do not look directly in the light!clearaudio ACLASTROBELIGHT Speed Light-
Spe

Technical Data – Speed Light
Light source: Blue LED / 300Hz precision light source (calibrated)
Battery: V 23GA – 12V – Alkaline

Please note:
An insufficient battery voltage can lead to inaccurate measurement results, even if the voltage is still sufficient to light the blue LED.
In case of extreme fluctuations of the measurement results, we recommend replacing the battery.

Clearaudio electronic GmbH
Spardorfer Str 150
91054 Erlangen
Germany
Phone: +49 9131/40300100
Fax: +49 9131/40300119
www.clearaudio.de
www.analogshop.de
info@clearaudio.de

clearaudio RB 250 Arms Require RB 300 End Stub- RB 250
Arms

Handmade in Germany
Clearaudio Electronic accepts no liability for any misprints.
Technical specifications are subject to change or improvement without prior notice.
Product availability is as long as stock lasts.
Copies and reprints of this document, including extracts, require written consent from
Clearaudio Electronic GmbH, Germany.
2021
© clearaudio electronic GmbH, 2021-07
Made in Germany

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals