ENACFIRE A8 True Wireless Earbuds Instructions
- June 6, 2024
- ENACFIRE
Table of Contents
TRUE WIRELESS STEREO EARPHONES
ENACFIRE A8 INSTRUCTION
FCC ID: 2AXI9IT500
Customer Support
[email protected] (US/CA)
[email protected] (UK)
[email protected](DE)
[email protected] (ES)
[email protected] (IT)
We will reply to you within 24 hours and 100% solve your issues
Packaging List
Product Overview
| 
---|---
- Charging Case LED Light
- Charging Port
- Multifunctional Button
- Earphone LED
- Magnetic Charging Pin
- Earphone microphone.
Power On & Pairing
Approach 1 – With Charging Case
Open charging case cap
Select ‘ENACFIRE A8’ from the Bluetooth list
Approach 2 – Without Charging Case
Power On: Touch the earphones for 2 seconds with prompt sound ‘Power on’
Pairing: Right earphone Blue and White light flash Select ‘ENACFIRE A8’
Note: Right earphone is the master earphone
ANC/Transparency Mode
Tap Left earphone once to switch between ANC/Transparency mode
ANC Mode Prompt Sound: Noise-canceling on
Transparency Mode Prompt Sound: Ambient on
Incoming call
Answer call/End call
Tap the Left / Right earphone once
Reject call
Touch the Left / Right earphone for 2 seconds
Music
Pause/Play
Tap the Right earphone once
Voice Assistant
Tap the Left / Right earphone 3 times
Change Song
Double-tap the Left/Right earphone
Adjust Volume
Touch and hold the Left/Right earphone
Power Off
Without Charging Case
Turn off Bluetooth to disconnect the earphones Touch either one earphone for 8
seconds to power off both earphones
Charging
Earphones:
Earphones white LED Light blinking/off: Charging/Fully Charged
Note: It takes about 1.5 hours to fully charge the earphones
Charging Case:
Charging Case white LED Light on/blinking: Fully Charged/Charging
Note: It takes about 1.5-2 hours to fully charge the charging case
Safety Instruction
Using earphones at high to moderate volumes for extended periods of time will
result in permanent hearing damage. It is advised that you keep volume levels
moderate to low at all times for your safety.
Do not use while driving, cycling, operating machinery, or performing other
activities that require hearing surrounding sounds.
Do not use earphones in thunderstorm weather, the earphones may not work
properly in bad weather conditions, and may increase the risk of being hit by
lightning. Earphones may not work properly under high temperature or high
humidity conditions.
Do not use any corrosive cleaner/oil to clean the earphones. If the earphones
come in contact with liquids, quickly wipe them away. If submerged in the
water, do not turn the earphones on until it is completely dried.
Tips: Man-made damage and loss are not covered under warranty. Keep the earphones and the packaging out of reach of children.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible
for compliance could void your authority to operate the equipment.
Documents / Resources
|
ENACFIRE A8 True Wireless
Earbuds
[pdf] Instructions
IT500, 2AXI9IT500, ENACFIRE IT500 True Wireless Earbuds, IT500 True Wireless
Earbuds, Wireless Earbuds, Earbuds, A8 True Wireless Earbuds, A8
---|---