ENACFIRE F1 True Wireless Stereo Earphones Instructions
- June 6, 2024
- ENACFIRE
Table of Contents
ENACFIRE F1 True Wireless Stereo Earphones
Packing List
Product Overview
- Charging port
- USB Output
- Charging case LED light
- Multifunctional button
- Earphone LED light and Mic
- Acoustic hole
- L / R Logo
- Magnetic Charging Pin
- Speaker
Wearing
Step 1 :
Choose the suitable ear tips
Step 2 :
Wear it and adjust to a comfortable position (Please distinguish between the
left and right earphone) 
Power On & Pairing
Approach 1 – With Charging Case
- Power On: Take out the earphones from the charging case with Blue light on
- Pairing: Earphones will start paring automatically with Blue and White light flash alternatively
- Connection: Select ‘ENACFIRE F1’ from the device’s Bluetooth list
Note: Left earphone is the master earphone
Approach 2 – Earphones Standalone
- Power On: Touch the multifunctional buttons for 2 seconds. Release when you hear the prompt sound ‘Power on’ with Blue light on
- Pairing: Earphones will start paring automatically with Blue and White light flash alternatively
- Connection: Select ‘ENACFIRE F1’ from the device’s Bluetooth list
Note: Left earphone is the master earphone
Disconnection
-
Reason 1: Device’s Bluetooth Function Turned Off
If the Bluetooth is turned off, earphones will be disconnected. After 5 minutes of reconnection timeout, the earphones will power off automatically. -
Reason 2: Out of Connection Distance
If the connection distance between the device and the earphones exceeds the effective range, the earphone will power off automatically after 5 minutes of reconnection timeout.
Incoming call
Answer call/End call
Tap the multifunctional button of either earphone once
Reject call
Touch the Left or Right multifunctional button for 2 seconds
Music
Pause/ Play
Double-tap the Right multifunctional button to pause/play music in the music mode (Some phones may require you to start a media player first)
Voice Assistant
To launch your Device’s Voice Assistant, double-tap the Left multifunctional
button with the ‘Beep’ prompt sound.
Next song
Touch the Right multifunctional button for 2 seconds
Previous song
Touch the Left multifunctional button for 2 seconds
Note : This function is not supported when the earphone is used in
single
Single Mode
Single Mode| Left Earphone (Master Earphone)| ****
Right Earphone
---|---|---
Method 1
| ****
Simply take Left earphone out from the charging case
| 1. Put back Left earphone only when both earphones are connected
2. Right earphone will start paring with blue and white lights flash alternately
3. Select another ‘ENACFIRE F1’ from the Bluetooth list.
Method 2
| ****
Touch the Left multifunctional button for 2 seconds with Blue and White light flashes alternately
| ****
1. Touch the Right multifunctional button for 4 seconds with Blue and White light flash alternately
2. Select another ‘ENACFIRE
F1’ from the Bluetooth list.
Note : Make sure earphones are turned off before using Method 2
Power Off
Mode 1
Put the earphones back to the charging case, they will power off automatically. Note: Put only the Left earphone into the charging case, the Right earphone will disconnected and start pairing Put only the Right earphone into the charging case, the Left earphone will stay connected.
Mode 2
Earphones Standalone
When the earphones are ON, touch either one multifunctional button for 6
seconds, both earphones will power off.
Charging
Earphones charging Status
- Earphones LED light on: Charging
- Earphones LED light off: Fully charged
Note: It takes about 1.5 hours to fully charge the earphones
Charging case charging Status
Lights on the charging case stand for the remaining battery capacity Note: It
takes about 3 hours to fully charge the charging case.
Safety Instruction
Using earphones at high to moderate volumes for extended periods of time will result in permanent hearing damage. It is advised that you keep volume levels moderate to low at all times for your safety. Do not use them while driving, cycling, operating machinery or performing other activities that require hearing surrounding sounds. Do not use earphones in thunderstorm weather, the earphones may not work properly in bad weather conditions, and may increase the risk of being hit by lightning. Earphones may not work properly under high temperature or high humidity conditions. Do not use any corrosive cleaner/oil to clean the earphones. If the earphones come in contact with liquids, quickly wipe them away. If submerged in the water, do not turn the earphones on until it is completely dried.
Tips : Warranty void if the earphones submersion in the water Keep the earphones and the packaging out of reach of children.
Q&A
-
Q: Why does the music cut in and out sometimes?
A: Please make sure there is no obstacle between the earphones and your device. Please make sure there is no Microwave oven / Wifi transmitter around you, which are more likely to produce electromagnetic interference and result in a signal interruption.
Note: Please keep your phone and the master earphone (L) as close as possible, to ensure a more stable Bluetooth connection. -
Q: What should I do if there are connectivity and pairing issues?
A: Please make sure both earphones have been turned off and try to forget all the devices’ names in your mobile phone’s Bluetooth list, then reconnect the earphones to the mobile phone. -
Q: How to contact the ENACFIRE Customer Service Team?
A: If you have any issue with the product, please contact us via [email protected] (US/ CA)/ [email protected] (UK). We will reply to you within 24 hours and 100% solve your issue.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including
interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.