ENERGY SISTEM Travel 6 ANC TWS Wireless Earbuds User Manual

: June 3, 2024
: ENERGY SISTEM

ENERGY SISTEM Travel 6 ANC TWS Wireless Earbuds

ENERGY SISTEM Travel 6 ANC TWS Wireless Earbuds
product

Introduction

Thank you for trusting our company and buying the new earphones True Wireless Travel 6 ANC. We hope you enjoy the product.

Care and maintenance

Do not expose your Earphones True Wireless Travel 6 ANC to impacts, dust, humidity or high temperatures. Do not use neither corrosive nor abrasive cleaning products.
Do not disassemble the device. All repair works should be carried out exclusively by qualiﬁed staﬀ of Energy Sistem Technology, S.A.
Make sure your Earphones True Wireless Travel 6 ANC are oﬀ when you are not using them. Do not let them completely discharged for a long time.
You can clean the earbuds’ external surface and charging connectors with a clean cloth and hand sanitiser. Do not use these products to clean the ear tips or the internal mesh of the earphones. Avoid getting the charging ports and connectors wet.

Warning

Hearing protection
Listening to loud music can cause irreversible hearing loss. To avoid hearing damage, we recommend the following guidelines:

Do not listen to loud music for long periods of time.
Turn the volume down on the source device before using the earphones, then gradually increase the volume to a safe volume level.

Safety
For safety reasons and to avoid possible accidents, we recommend the following safety measures:

Do not use the earphones while driving or carrying out any other activity that requires special attention.
Keep the product, packaging and accessories out of the reach of children and pets to avoid accidents and choking hazard.

Technical speciﬁcations

Audio

Frequency response: 20 Hz ~ 20 kHz
Driver diameter: 13 mm
Maximum power: 5 mW
In-ear design
Type: dynamic

Connectivity

Bluetooth® 5.3 (class 2) wireless technology.
Supported audio codecs: SBC / AAC
Frequency band: 2.4 GHz
Maximum output power: < 20.00 dBm
Compatible Bluetooth® proﬁles: HSP / HFP / A2DP / AVRCP
Up to 20 m distance range
True Wireless function with auto-pairing
Hands-free function
Voice assistant compatible with Google/Siri

Active Noise Cancelling (ANC)

ANC: up to -30 dB reduction at a frequency between 20 and 1000 Hz

Transparency Mode

Transparency mode for listening to external sounds

Microphone

Type: built-in microphone
Sensitivity: -42 dB ± 3 dB (@1 kHz)
Frequency response: 100 Hz ~ 10 kHz

Battery

Earbuds:

Capacity: 40 mAh (each earbud)
Type: lithium-polymer battery
Battery life with ANC enabled: 6 hours*
Battery life with ANC disabled: 8 hours*
Charging time: 1.5 hours
Charging method: charging case

Charging case:

Capacity: 400 mAh
Type: lithium-polymer battery
Battery life with ANC enabled: 18 hours*
Battery life with ANC disabled: 24 hours*
Charging time: 2 hours
Charging method: USB Type-C

“*” This value is approximate. The battery life depends on the selected volume level and the type of music.

Product content

Earphones True Wireless Travel 6 ANC
Charging case
3 sets of interchangeable silicone ear tips
3 sets of interchangeable memory foam ear tips
USB Type-C cable
Quick guide

General overview

Left multifunction touch button
Right multifunction touch button
Microphone
LED status indicator
Battery level indicator (charging case)
USB Type-C charging port

Getting started

Before using the earphones for the ﬁrst time, remove the blue stickers covering the pins of both earbuds’ charging ports. Put them in the charging case to start the charging process.

Switching on and oﬀ the device

To switch on your Earphones True Wireless Travel 6 ANC, simply take them out of the charging case or tap and hold the Left and right multifunction touch buttons (1 and 2) for 10 seconds. You will hear a conﬁrmation sound. Both earbuds sync automatically.
To switch oﬀ your Earphones True Wireless Travel 6 ANC, put them back in the charging case or tap and hold the Left and right multifunction touch buttons (1 and 2) for 10 seconds. At this point, both units switch oﬀ.

Changing the ear tips

The product comes with ear tips in three diﬀerent sizes: S, M and L.
We recommend trying out the provided ear tips in diﬀerent sizes to choose the ones that ﬁt your ears best. Using ear tips that don’t ﬁt correctly may have an impact on the perceived sound quality.

Using silicone ear tips
The advantage of silicone ear tips is that they are washable and durable. Watch the video below to see how you can easily change them. Video – How do I change the ear tips for my earphones?

Using memory foam ear tips
They provide extra isolation. Squeeze the ear tips before placing them in your ears. They will expand in the ear canal to create a tight seal, thus ensuring optimal insulation.
This type of ear tips degrade with use. Visit the Accessories and spare parts section on our online store to buy new ones when needed.

Bluetooth® pairing

Switch on your Earphones True Wireless Travel 6 ANC. Both earbuds sync automatically. Select Earphones True Wireless Travel 6 ANC from the list of Bluetooth devices on your smartphone or Bluetooth music player and tap “connect”. Both earbuds will be connected immediately and without codes. You will hear a conﬁrmation sound when both units are paired.
If you previously paired the earbuds with a device, there is no need to repeat the pairing process. Just enable the Bluetooth connection on your music player and switch on your Earphones True Wireless Travel 6 ANC. They will sync with it automatically.

ANC (Active Noise Cancelling) feature

To enable or disable active noise cancellation (ANC), tap and hold the Right multifunction touch button (2) for 2 seconds.
Choose the ANC mode that you prefer. The earbuds will inform you about the ANC mode selected. The device saves the last selected mode. This way, it will be enabled when you turn the earphones back on.
You will experience active noise cancellation, especially at low frequencies, resulting in a decrease of up to 30 dB. This mode is particularly useful in noisy environments, especially when travelling by train, bus or plane.
Important:

For security reasons, we recommend to disable ANC while walking on the street or carrying out activities in which noise reduction may put users at risk.
Remember to disable this feature when not using the earphones to avoid running out of battery.
It is not possible to use any ANC mode during phone calls.

Transparency mode

When your Earphones True Wireless Travel 6 ANC are in transparency mode, they pick up surrounding sounds so you can listen to the outside word and communicate without having to remove your earphones. To enable or disable Transparency mode, tap and hold the Left multifunction touch button (1) for 2 seconds.
Note: It is not possible to use transparency mode during phone calls.

Playback control

Play / Pause
Tap the Left multifunction touch button (1) twice in a row to resume playback or pause the music.
Volume + / Volume –
Tap the Right or left multifunction touch button (2 or 1) to turn the volume up or down.
Skipping to the next / previous track
Tap the Right multifunction touch button (2) twice in a row to skip to the next track during music playback. Tap the very same button three times to skip to the previous track.

Call control

Once the Earphones True Wireless Travel 6 ANC and your smartphone are paired, you can control calls from the earphones.

Answering / Ending a call
To answer an incoming call or hang up, tap the Left or right multifunction touch button (1 or 2) twice in a row.
If you hold it down for 2 seconds, you will reject the call.

Using the Voice Assistant feature

You can interact with your smartphone voice assistant using your Earphones True Wireless Travel 6 ANC. To do so, tap the Left multifunction touch button (1) three times in a row. You can give the voice command after hearing the conﬁrmation sound.

Charging the battery

Earphones
When the battery level of your Earphones True Wireless Travel 6 ANC is below 2%, you will hear a low battery warning sound. To charge the earphones? battery, put the earbuds back in the charging case. The LED battery level indicator (charging case) (5) ﬂashes in white and switches oﬀ once the charging process is complete.
Charging case
When the battery level of your charging case is below 10%, the LED battery level indicator (charging case) (5) ﬂashes. Plug the USB Type-C end of the provided cable into the USB Type-C charging port (6), and the other end into a 5 V USB charging device. The LED battery level indicator (charging case) (5) lights up red. Once the charging process is complete, it will turn white.
Important: We recommend not leaving neither your Earphones True Wireless Travel 6 ANC nor your charging case unused for long periods of time with an empty battery. We advise charging the battery at least once a month.

Restoring default settings

To restore the earphones to their default settings, follow the steps below:

Take the earphones out of the charging case. Do not pair them with any smartphone or Bluetooth® device.
Tap the touch button on both earbuds 10 times in a row. The LED indicator on the earbuds will ﬂash red, meaning the action has been successfully completed.
At this point, you can pair them with your Bluetooth® device and use them as usual.

Warranty

Find the full warranty terms and conditions at: https://www.energysistem.com /terms-warranty

Declaration of conformity

Issuer’s name: Energy Sistem Technology, S.A. –
CIF: A53107488
Address: C/ Calpe, 1 – 03509 Finestrat, Alicante (Spain)
We declare under our sole and exclusive responsibility that the product:

Description: wireless earphones
Brand: Energy Sistem
Model: Earphones True Wireless Travel 6 ANC
Manufacturer: Energy Sistem Technology, S.A.
Manufacturing country: China

referred to in this declaration complies with the essential norms and standards

EN 62479:2010
EN 50663:2017
EN 62368-1:2014 A11:2017
EN 50332-2:2013
EN 301 489-1 V2.2.3 (2019-11)
EN 301 489-17 V3.2.4 (2020-09)
EN 300 328 V2.2.2 (2019-07)

in conformity with the provisions of the Directive 2014/53/EU of the European Parliament and of the Council of 29th March 2014.
Finestrat, 1st August 2022

Miguel Ángel Aragüez García Innovation and Technology Director