SHAPEHEART SCREW Magnetic Mount for Scooter User Manual
- June 5, 2024
- SHAPEHEART
Table of Contents
SHAPEHEART SCREW Magnetic Mount for Scooter
INSTALLATION
- Smartphone sleeve
- Magnetic dock
- Silicone strap
- Mounting plate (3 holes / 45mm)
- 2 screws of 28mm
- 2 lock washers
- Transport bag
Two possible mounts:
- Dashboard
- Handlebar
For more specific mounting tutorial about different Scooters (MP3 / Forza / Tmax…), flash the following QR code or go to the following URL : https://www.shapeheart.com/pages/manuel
Mounting with 2 holes or just 1 hole
Register your product by scanning the QR Code :
+6 months warranty on fabric
www.shapeheart.com/warranty
INSTRUCTION
- Remove the plastic part of the scooter you want to drill in order to be able to pass the screw through it
- Drill the part with 1 or 2 holes (handlebar/dashboard): see diagrams on the front of this manual
- Insert the screw(s) and place the lock washer on the plate side
- Important: put the strap in place before screwing the mounting plate. Either in between the 2 screws or directly through the screw
- Screw on the mounting plate and fix the magnetic dock so that the strap is evenly stretched
- Put back the plastic part of the scooter.
Warning! Always align the dock and the sleeve.
Always align the dock and the sleeve. Our sleeve does not replace a case, a safety glass, or insurance for your smartphone. In the event of a strong shock or a fall, there is a risk that it will come off. If the magnet system force does not seem strong enough, please contact us before using your product. All our packaging can be recycled. Don’t throw away your magnets, give them a new life here: www.shapeheart.com/recycle
References
- Garantie – Shapeheart Store
- Recycle Shapeheart
- Garantie – Shapeheart Store
- Manuel – Shapeheart Store