Bietrun WXM36 Wireless Microphone System User Manual
- June 12, 2024
- BIETRUN
Table of Contents
Bietrun WXM36 Wireless Microphone System
Product Information:
The frequency refers to the number of occurrences of a repeating event per
unit of time. In the context of this product, it refers to the rate at which a
specific action or operation is performed.
Product Usage Instructions:
- Determine the desired frequency for the product operation.
- Refer to the product settings or controls to adjust the frequency.
- Ensure that the product is powered on and connected to any necessary power sources.
- Follow any additional instructions provided in the user manual or accompanying documentation for specific usage scenarios.
- Test the product operation at the selected frequency to ensure it meets your requirements.
- Adjust the frequency as needed for optimal performance.
- Take note of any limitations or recommendations regarding the frequency specified in the user manual or product documentation.
- When finished using the product, power it off and disconnect it from any power sources. Please note that specific instructions may vary depending on the product model and manufacturer. Always refer to the user manual provided with your product for accurate and detailed usage instructions.
Feel free to contact us for any questions or concerns.
Email: Amazon@bietrun.com
Product Introduction
This wireless product adopts UHF frequency band transmission, which has the characteristics of long transmission distance, strong anti-interference ability, low delay and crystal-clear sound. The visible working status makes operation easy.
Note: Please read and obey all warnings carefully before use, and keep this manual for future use.
Product Description
How to Connect
Output connection
Audio amplification equioment with CANNON interface or 6.35 audio input
interface can be connected to this product, including mixer, multimedia
speaker, Bluetooth speaker, power amplifier, trolley speaker, etc.
Note:
The signal (1)(2) can be connected to different amplifying equipment
respectively, but it cannot be connected to the same one, otherwise the sound
may not be played normally.
Trouble Shooting
Specifications
Packaging Content
- 2X Microphone (A. B)
- 1X Receiver
- 2X Receiving antenna
- 1X 6.35 to 6.35 signal cable
- 2X XLR Audio signal cable
- 1X Power adapter
- 1X User manual
Frequency
Manufacturer:
SHENZHEN LONGXIANG INTELLIGENT TECHNOLOGY CO, LTD.
Address: FLOOR 4, BUILDING D, FUXINLIN INDUSTRIAL AREA,HANGCHENG
INDUSTRIAL ZONE FUHUA COMMUNITY XIXIANG STREET, BAOAN DISTRICT SHENZHEN
GUANGDONG CHINA
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.