atomi smart AT1308 Smart Color String Lights User Guide
- June 6, 2024
- Atomi Smart
Table of Contents
AT1308 Smart Color String Lights
User Guide
Get the app
Download the Atomi Smart app
from the App Store or Google Play.
Register
Follow the on-screen instructions and register an account.
Make sure to allow access to Location (Android),
Bluetooth and Local Network (iOS).
Plugin your Atomi Smart device
And confirm that the lights are flashing red.
If not flashing, press and hold the Power button for 10s to reset.
Add your Atomi Smart device
Press “Add Device” or the “+” sign and select “Go to add” on the popup that
appears.
If the popup does not appear, close the app and try again.
Still nothing? Read the “Troubleshooting” section of this user guide.
Select the right network
Enter your home WiFi name and password, then press “Continue”
Make sure you’re connected to a 2.4GHz WiFi network (Atomi Smart can’t connect
to 5GHz networks).
Troubleshooting
Smart WiFi
Color String Lights
The popup does not appear when adding a device.
Make sure that you are allowing the app to access your phone’s Location
(Android), Bluetooth and Local Network (iOS). For more details, visit our
website’s Support page.
If the popup still doesn’t appear, follow the steps below:
- Press “Add Device” or the “+” sign and select your smart device.
- Follow the on-screen instructions (Make sure you connect to a 2.4GHz WiFi Network).
I can’t find the atomic-smart-XXXX network in my WiFi list.
Make sure your Atomi Smart device is plugged in and the lights are flashing
red. If not, unplug your Atomi Smart device and plug it back in to reboot.
My WiFi network doesn’t appear in the Atomi Smart app.
Use your smartphone to confirm that you have at least two WiFi bars in the
vicinity of your Atomi Smart device. If not, move your Atomi Smart device
closer to your router. (The list will refresh every 10 seconds).
Cannot connect to my WiFi network.
Make sure that you have entered the correct WiFi password during the WiFi
setup. Check if there are problems with your internet connection. If the WiFi
signal is too weak, reset your WiFi router and try again.
I’m getting “Failed to Add Device”, “Failed to find router”, or “DHCP”
errors.
- Confirm that your phone is connected to a 2.4GHz WiFi network.
- Check whether the router password you entered is correct.
- Confirm that the DHCP service is enabled on your router settings.
- Make sure that your WiFi signal is strong.
- Temporarily disable your 5GHz network.
- If you have a mesh network/router that does not allow you to disable 5GHz, try to move farther away from your router until your phone moves to the 2.4GHz band.
- For more Connection Troubleshooting tips, visit atomismart.com/connection-troubleshooting/
My Atomi Smart device appears as “Unavailable” or “Offline” in the
app.
Refresh the device list.
I just replaced my router.
If you replace your router, you will need to reset your devices and add them
again to the app.
How to reset my device.
Press and hold the Power button for 10s. Confirm that the lights start flashing.
For more information about apps and device features, tutorials, and troubleshooting tips go to: www.atomismart.com/helpStringLights
Safety Information
IMPORTANT:
Read all safety information and installation instructions before installing or
servicing this product. Save this manual for reference.
RISK OF ELECTRIC SHOCK
-
Receptacle outlets used for powering Smart String Lights shall comply with all national and local electrical codes. Consult a local electrician if unsure of compliance requirements.
-
For use only on GFCI protected circuits.
-
Do not submerge.
-
Do not use water.
-
Do not use with extension cord near water or where water may accumulate.
-
Keep lamps at least 16 feet from the water.
-
Keep plugs and receptacles dry.
-
Avoid damage to the cords and lamp assemblies during installation. Periodically inspect the Smart String Lights for physical damage or other damage caused by outdoor exposure to the elements.
-
Replace any damaged Smart String Light strings.
-
Do not install in locations where Smart String Lights can be stepped on.
-
Ensure Smart String Lights are unplugged from power during installation.
-
Smart String Lights should be installed out of the reach of children.
Do not allow children to play with them. -
Ul recommends testing GFCI circuits and receptacles every month to ensure proper operation.
-
Do not operate without the bulb securely screwed in.
RISK OF FIRE
- Smart String Lights are designed to be mounted with their individual keyhole mounting feature.
- Do not mount Smart String Lights by using the main electrical cord or the individual drop cords.
- Smart String Lights are designed to have unlimited linkability by using their electrical plugs and receptacles.
- Do not mount Smart String Lights in any position where the bulb is facing up.
- Do not allow the LED lamp assemblies to be in contact with combustible materials. LED lamp assemblies should hang freely and not be susceptible to repetitive damage caused by environmental conditions such as wind, rain, and ice.
- Not intended for installation in ceilings, sorts, cabinets, artics, or other enclosed spaces.
Still can’t connect?
Need assistance?
Our friendly customer service team will work hard to put a smile back on your
face.
Here’s how we can connect.
1-800-757-1440
Mon-Fri 9:00-5:00 EST (US)
Welcome to the Atomi Smart family!
We know you will love our products so much that we are giving you an exclusive
15% off your next purchase on atomismartr.com.
Log onto
https://atomismart.com/shop-now/
Add to Cart
Enter promo code ATOMI15OFF
Proceed to checkout
Free shipping on orders over $50
within the contiguous US only
Terms and conditions apply;
The following terms and conditions apply to the promo code;
- The coupon is only valid on the Atomi Smart website www.atomismart.com.
- A valid code must be entered at the checkout page in order to redeem the promotion.
- Customers can only redeem one time at checkout.
- Customers can only use the promo code once.
- Atomi Smart reserves the right to cancel or modify any order, or revoke the use of the promo code for any reason.
- Unless otherwise stated, promo codes are not valid in conjunction with other promotions or discounts.
- Additional terms and conditions may be specfied in relation to specific promo codes (for example, duration, eligibility, discount amount, and products covered), and will govern the use and redemption of those vouchers.
- The Promo code is not exchangeable for cash.
- Atomi Smart will not be liable and/or be required to offer replacement codes, discounts, credits, cash, or otherwise compensate customers for:
a. discontinued or canceled promo code;
b. improper use of, or inability to redeem, a promo code; or
c. the inability to redeem promo codes due to technical issues.
FCC Notice:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the two following conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interterence that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
Warning
This product can expose you to chemicals including Lead, which is known to the
State of California to cause birth defects or other reproductive harm. For
more information, go to
www.P65Warnings.ca.gov.
For questions or concerns, email us at
support@atomiusa.com
Manufactured and marketed by Atomi Inc.
10 West 33rd St., New York, NY 10001
atomi™ is a trademark of Atomi Inc.
atomic smart® is a registered trademark of Atomi Inc.
Designed by Atomi in New York. Made in China.
Three-year limited warranty from the date of purchase against defects in
material and workmanship.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>