atomi smart SMART-200 Smart LED Orb Light User Guide
- June 5, 2024
- Atomi Smart
Table of Contents
Let’s get started!
Smart
Portable Orb Light
Quick Start Guide
Get the app
Download the atomi smart app from the App Store or Google Ploy.
Register
Flaw the on-screen instructions and register on the account.
Add your Smart Bridge
Press “Add Device or the sign and noose the Smart Bridge to Install from the
device list.
Turn your phone’s Bluetooth ON
Connect the Smart Bridge to the USB wall charger and plug it into the outlet.
Press ‘Continuer on the otomi smart app.
( Fa canton, connection. donotow trIesenortorougunow. ‘Iowa has woken: too
tO*0 SO VI step T.
Select the right network
Enter your WIFI password and ‘Confirm’.
(Make StrO))are connected to 0 2.46112 WA network fOtOrri Strut COM COMOOt to
Ott network.
Turn on the Smart Orb Light
Then open the Smart Bridge device that you added on the atom smart app home
screen.
Add your Smart Orb Light
Press ‘Add new device. If you have already added the device on Step 4. press
‘Add existing device”. Follow the on-screen instructions.
Troubleshooting
Smart
Portable Orb Light
The app can’t find my smart device.
For Smart Bridge: Make sure that your phone’s Bluetooth is turned ON and the
permission settings are allowing the app to connect via Bluetooth.
For Smart Orb Light Press and hdd the “Mode button until the light starts
flashing to reset your device.
My WIFI network doesn’t appear In the atom) smart app.
Use your smartphone to confirm that you have at least two WIFI bonus In the
vicinity of your atom! smart device. If not move your atorni smart device
closer to your router. (The list will refresh every 10 seconds).
Cannot connect to my wifi network.
Make sure that you have entered the correct WIFI password during setup. Check
if there are problems with your Internet connection. If the WIFI signal Is too
weak. reset your WIFI router and try again.
My atom’ smart device appears as “Unavailable in the app.
Refresh the device list.
My atomic smart app is frozen.
Force quit and re-launch the atoms smart app.
I just replaced my router.
To reset the WIFI without losing your atom! smart device settings. hold
down the power button and wait for the LED to change from amber to blinding
white. then release. When the LED begins to alternate white and amber. follow
steps 3-5 to associate your otoconia smart device with your new network.
My Smart Orb Light has no power.
Plug the Wireless Charging Base Into the outlet and place your Smart Orb Light
on the base.
I’m still having trouble!
WiFi networks come in a lot of shapes and sizes with many quirks of their own.
It doesn’t mean your atomic smart device is malfunctioning. If problems
persist. please try these steps. in this order.
- Force quit and re-launch the atomic smart app. Check to see if this fixes the issue.
- Unplug your atomic smart device and plug it back in. Check to see if this fixes the issue.
- Unplug your router and plug it back in. Check to see if this fixes the issue.
- Delete and reinstall the atomic smart app. Check to see if this fixes the issue.
For more troubleshooting tips go to
www.atomismart.com/helpOrbLight
Still can’t connect?
Need assistance?
Our friendly customer service team will work hard to put a smile back on your face. Here’s how we can connect.
1-800-757-1440 Mon-Fri 9:00-5:00 EST
(US)
or support@atomiusa.com
Welcome to the atomic smart family!
We know you will love our products so much that we are giving you an exclusive 15% off your next purchase on atomismart.com.
Log onto https://atomismart.com/shop-now/
Add to Cart
Enter promo code ATOM115OFF
Proceed to checkout
Free shipping on orders over $50 within the contiguous US only
Terms and conditions apply,
The following terms and conditions apply to the promo code:
- Coupon Is only void on the atom smart website ww.v.atomismortcom.
- A valid code must be entered at the checkout page in order to redeem the promotion.
- Customers can only redeem one time at checkout.
- Customers can only use the promo code once.
- atom smart reserves the right to cancel or modify any order; or revoke the use of the promo code for any reason.
- Unless otherwise stated. promo codes are not valid In conjunction with other promotions or discounts.
- Additional terms and conditions may be specified in relation to specific promo codes (for example, duration, eligibility, discount amount, and products covered), and will govern the use and redemption of those vouchers
- The Promo code Is not exchangeable for cash.
- atomic smart will not be liable and/or be required to offer replacement codes, discount credits, cash, or otherwise compensate customers for a. discontinued or canceled promo code; b. improper use of, or inability to redeem, a promo code: or c. the Inability to redeem promo code due to technical issues.
Warning
This product can expose you to chemicals including Leo: I.which is known to
the State of California to cause birth defects or other reproductive harm. For
more information to rivmv.P851Atunings.co.gov.
FCC Notice:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the two following conditions:
- This device may not cause harmful interference.
- This device must accept any interference received. including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and,if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. if this equipment
does cause harmful interference to radio or television reception. which can be
determined by turning the equipment off and on the user is encouraged to try
to correct the interference by one or more of the following measures
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help. The
device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
For questions or concerns. email us at
supportgatomiusa.com
Manufactured and marketed by Atomik Inc.
10 West 33rd St., New York, NY 10001
atomic TM IS a trademark of Atomi Inc.
atomic smart® is a registered trademark of Atomi Inc.
Designed byAtomi in New York. Made in China.
One-year limited warranty from the date of purchase against defects in
material and workmanship.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>