atomi smart T1823 Smart WiFi Ceiling Fan User Guide
- June 5, 2024
- Atomi Smart
Table of Contents
Atomi smart T1823 Smart WiFi Ceiling Fan
INSTALLATION
- Ensure your fan is incorrectly installed and all fasteners are secure. It is recommended the fan run on HIGH for 10-20 seconds to perform these next steps.
- Pause your fan to attach the clip to the end of any blade. Run your fan and observe the wobble. Stop the fan and move the clip to the next blade, repeating these steps for all the fan blades
- Now, move the clip to the blade that caused the least wobble. Run your fan and observe the wobble.Adjust the clip in small increments along the edge of the blade to achieve the least wobble..
- At the location where you noticed the least wobble, adhere the balance weight and remove the clip.
Troubleshooting
The Ceiling Fan is wobbling.
- Confirm that the download was correctly attached to the mounting bracket.
- Make sure that the mounting screws are firmly screwed in.
- Confirm that the canopy is firmly atached to the mounting bracket.
- Note any warped blades. If even one blade is slightly distorted, it can create an imbalance. Check for warping by standing on a secure ladder and looking down the edge of the blade toward the motor. If there’s any curvature, the blade is considered warped. Repeat this step for every blade. If they do not appear uneven, confirm that the screws that attach the blades are tightened and secure. Warped blades cannot be balanced.
Use the included balance kit to even out the blade weight distribution. Directions on how to use it can be found on the steps previously shown.
For more information about device features,
tutorials, and troubleshooting tips go to:
www.atomismat.com/helpCeilingFan
For questions or concerns, email us at
suppot@atomiusa.com
Manufactured and marketed by Atomi Inc.
10 West 33rd St., New York, NY 10001 atomi™ is a trademark of Atomi Inc.
atomic smat® is a registered trademark of Atomi Inc.
Designed by Atomi in New York. Made in China.
Two-year limited warranty from the date of purchase against defects in material and workmanship.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>