atomi smart AT1351 4ft LED Shop Light User Guide

atomi smart AT1351 4ft LED Shop Light

HOW TO USE

1. Get the app
   Download the atomi smart app from the App Store or Google Play.

2. Register
   Follow the on-screen instructions and register an account.

3. Add your smart device
   Press “Add Device” or the “+” sign and choose the smart device to install from the device list.

4. Select the right network
   Enter your WiFi password and “Confirm”. Make sure you’re connected to a 2.4GHz WiFi network (atomi Smart can’t connect to 5GHz networks).

5. Plug in your smart device
   And press “Continue” on the atomi smart app.

6. Connect to the network
   Press “Go to Connect” and follow the instructions on the screen.

7. Connect your sma˜ device
   Select “atomi-smart-XXXX” on the network list to connect. If you are not automatically directed to the WiFi list, go to SETTINGS on your sma˜phone and press WiFi.

Troubleshooting

I can’t find the atomi.smart.XXXX network in my WiFi list.
Make sure your atomi smart device is plugged in and the light is blinking quickly. If not, pull the string for 10 seconds to reboot.

My WiFi network doesn’t appear in the atomi smart app.
Use your sma˜phone to confirm that you have at least two WiFi bars in the vicinity of your atomi smart device. If not, move your atomi smart device closer to your router. (The list will refresh every 10 seconds).

Cannot connect to my WiFi network.
Make sure that you have entered the correct WiFi password during setup. Check if there are problems with your internet connection. If the WiFi signal is too weak, reset your WiFi router and try again.

My atomi smart device appears as “Unavailable” in the app.
Refresh the device list.

My atomi smart app is frozen.
Force quit and re-launch the atomi smart app.

I just replaced my router.
To reset the WiFi without losing your atomi smart devices se˝ings, hold down the power bu˝on and wait for the LED to change from amber to blinking white, then release. When the LED begins to alternate white and amber, follow steps 3-5 to associate your atomi smart device with your new network.

I’m still having trouble!
WiFi networks come in a lot of shapes and sizes with many quirks of their own. It doesn’t mean your atomi smaer device is malfunctioning. If problems persist, please try these steps, in this order:

1.  Force quit and re-launch the atomi smart app. Check to see if this fixes the issue.
2.  Unplug your atomi smart device and plug it back in. Check to see if this fixes the issue.
3.  Unplug your router and plug it back in. Check to see if this fixes the issue.
4.  Delete and reinstall the atomi smart app. Check to see if this fixes the issue.

Inside the box you’ll find

Installation

• Option A: Pendant Mounted
• Option B: Surface Mounted

Option A: Pendant Mounted

NOTE: The unit is intended to be installed directly beneath a ceiling- mounted receptacle. If there is excess cord, bind with string or a cable tie to keep it out of workspace.
IMPORTANT: Unplug the Smart Shop Light prior to mounting.

Attach the Ceiling Hooks
Choose a desired location for the light fixture, making sure it is within reach of an outlet. Use a pencil to place a mark on the ceiling where each ceiling hook (part CC) should go. Screw hooks into place until secure.

Suspended to Ceiling

1.  Hook the “S” hooks (Part BB) into each of the holes on both sides of the Smart Shop Light.
2.  Hook the hanging chains (Part AA) into each of the ceiling hooks (Part CC).

Surface Mounted

Attach the Ceiling Hooks

1.  Drill a 1/4 inch pilot hole into the marked screw locations.
2.  Inset wall anchors (Parts DD).
3.  Start the wood screws (Part EE) but do not tighten fully.
4.  Slide the fixture over until the narrow legs of the keyhole slots are under the heads of the wood screws (Part EE).

Secure the Fixture
Drill a 1/4 inch pilot hole nearby the fixture’s receptacle. Insert wall anchors (Pa˜ DD) and tighten the wood screws (Parts EE).

The following terms and conditions apply to the promo code;

1. The coupon is only valid on the atomi smart website www.atomismart.com.
2. A valid code must be entered at the checkout page in order to redeem the promotion.
3. Customers can only redeem one time at checkout.
4. Customers can only use the promo code once.
5. atomi smart reserves the right to cancel or modify any order, or revoke the use of the promo code for any reason.
6. Unless otherwise stated, promo codes are not valid in conjunction with other promotions or discounts.
7. Additional terms and conditions may be specified in relation to specific promo codes (for example, duration, eligibility, discount amount and products covered), and will govern the use and redemption of those vouchers.
8. Promo code is not exchangeable for cash.
9. atomi smart will not be liable and/or be required to offer replacement codes, discounts, credits, cash or otherwise compensate customers for:
   • discontinued or cancelled promo code;
   • improper use of, or inability to redeem, a promo code; or
   • the inability to redeem promo code due to technical issues.

FCC Notice

This device complies with Pa˜ 15 of the FCC Rules. Operation is subject to the two following conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Pa˜ 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Warning
This product can expose you to chemicals including Lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

For questions or concerns, email us at support@atomiusa.com Manufactured and marketed by Atomi Inc. 10 West 33rd St., New York, NY 10001 atomi™ is a trademark of Atomi Inc. atomi smart® is a registered trademark of Atomi Inc. Designed by atomi in New York. Made in China. One-year limited warranty from the date of purchase against defects in material and workmanship.

Still can’t connect?
Need assistance?
Our friendly customer service team will work hard to put a smile back on your face. Here’s how we can connect. 1-800-757-1440 Mon-Fri 9:00-5:00 EST (US) or support@atomiusa.com

References

• Make Your Home Smarter | Atomi Smart
• Make Your Home Smarter | Atomi Smart
• | Smart Shop Light - Atomi Smart
• P65Warnings.ca.gov
• Shop Smart Products - Let Your Devices Work For You | Atomi Smart

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>