August EPG500 TWS Gaming Earbuds User Manual

User Manual
EPG500

TwS Gaming Earbuds

Thank you for purchasing the August EPG500 TWS Gaming Earbuds. This user manual is designed to familiarize you with all the features of this device. Please take the
time to read this user manual carefully, even if you are already familiar with a similar product.

Safety
To ensure the safety of you and others, please read the Safety Instructions before using this device. Please do not disassemble the EPG500, it can be unsafe and will invalidate
the manufacturer’s warranty.

Disposal
Please ensure the product and accessories are disposed of in compliance with the WEEE (Waste Electrical and Electronic Equipment) Directive and any other regulations applicable to your country. Always check with the environmental agency and any other relevant authorities for current disposal regulations.

Declaration of Conformity
The Declaration of Conformity can be found on our website at http://augustint.com/en/declaration/

Customer Service
You can contact us by phone at: +44 (0)845 250 0586 or by email at: service@augustint.com should you require further technical support or customer service.

Safety Instructions

• Storage and Use

• Maintenance
  Please unplug all leads before cleaning this device.

Main Features

• Gaming mode, Low Latency & Bluetooth 5
• Dual microphone for clear sound production
• Noise Cancelling with deep bass range
• USB-C charging case with 40 hours of battery life
• Lightweight and comfortable

Box Contents

Part Names and Functions

1. Multifunction Touch Area (Power/Play/Pause/Answer Call)
2. Microphone
3. Power Socket
4. Battery Indicator
5. Pogo Pins
6. Status LED

Operation

First Use

Take out both earbuds and remove the protector from charging pogo pins, then place them back into the case to activate. Charge both earbuds fully before first use (for details, please refer to 5.2 Charging)

If the earbuds have not been charged, then please charge the charging case. The earbuds will automatically pair with each other and enter connection mode after powering on. The left earbud will flash blue and red when in pairing mode.

 Charging

Please fully charge the EPG500 before first use or if left unused for a long period of time.

To charge earbuds, put earbuds into the charging case. While charging, two status LED lights are blue and turn off once fully charged. To charge the charging case, plug the Type-C charging cable into the battery case port. The battery indicator will display current charging progress.

Switch On/ Off

Both earbuds will turn on automatically when the charging case is opened or when the Multi-function Button has been pressed for 3seconds. Both LED lights to turn on pink for 1 second, then slow flash once per 1 second.

Both earbuds will turn off automatically when placed back into the charging case and the charging case is closed or when the Multi-function Button has been pressed for 5 seconds. Both LEDs will turn on blue and then off.

 Bluetooth Connections

The EPG500 will enter reconnection mode when powered on. When connected to a previously paired device, the EPG500 will automatically reconnect. For the first connection, please refer to ‘5.1 First use’. To pair to a new device, insert earbuds back into the charging case, then disconnect the EPG500 from your old device. Both status LEDs will flash slowly.

– Twin earbuds pairing
Open the cover of the charging case or take both earbuds out of the charging case. The earbuds will automatically pair with each other. The earbuds will enter Bluetooth pairing mode automatically. Both LEDs will flash slowly.

-Single earbud pairing
When using a single earbud, take one earbud out of the charging case and close the case, Press the Multifunction button for 3 seconds to turn on an earbud. The status LED will flash pink. Then, the earbud will automatically enter into pairing mode, the LED will flash slowly. Look for the Bluetooth name ‘EPG500’ on your device. Select it and
complete pairing with a single earbud.

Operations

Music

Call

Specification

Warranty

This product is guaranteed for twelve months from the date of the original purchase. In the unlikely event of any defect arising due to faulty materials or workmanship, the unit will be either replaced or repaired free of charge (where possible) during this period. An alternative product will be offered in case the product is no longer available or repairable.

This warranty is subject to the following conditions:

• The warranty is only valid within the country where the product is purchased.
• The product must be correctly installed and operated in accordance with the instructions given in this user manual.
• The product must be used solely for domestic purposes.
• The warranty only covers the main unit and does not cover the
• The warranty does not cover the damage caused by misuse, negligence, accident, and natural disaster.
• The warranty will be rendered invalid if the product is resold or has been damaged by inexpert repairs. The manufacturers disclaim any liability for incidental or consequential damages.
• Please consult our customer adviser before returning any product; we are not responsible for any unexpected product returns.
• Any faulty product must be kept and returned in the original packaging with all the accessories and the original copy of the purchase receipt.

The warranty is in addition to and does not diminish, your statutory or legal rights.

Customer Service:

Telephone: +44 (0) 845 250 0586 Email: service@augustint.com

This product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The Declaration of conformity may be consulted online at http://www.augustint.com/en/declaration

Industry Canada Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept interference, including interference that may cause undesired operation of the device.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

No Unauthorized Modifications: Do not make any changes or modifications to this product without the prior express written approval of August International Ltd. Any changes or modifications made without express written approval could void the user’s authority to operate this product.

For details of further relevant technical standards, please contact us at the address above.

August International Ltd.
Rawmec Business Park
Hoddesdon EN 11 0EE
United Kingdom
Tel: +44(0) 845 250 0586

Bayern. 10, D-30855
Langen Hagen Germany
Tel: +49(0) 511 97812978
www.augustint.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>