Shenzhen Mossloo Industrial MSL-M2022Q Wireless Power Bank Instruction Manual
- June 6, 2024
- Shenzhen Mossloo Industrial
Table of Contents
Wireless Power Bank
Instruction Manual
MSL-M20220, 5077-07
Features:
- Powerbank ON/OFF Button
- LED Indicator
- Lightning Input
- Type-C Input/Output
- USB-A Output
- Wireless Charging Surface
- Magnetic Surface
What’s Included:
1 x 10,000 mAh Wireless Power Bank 1 x US8-A to Type-C charging cable 1 x Instruction Manual
Tech Specifications
- Capacity: 10000mAh/3.85V138.5Wh
- Lightning Input: DC 5V72A
- Type-C InpuUOutput DC 5V/2.4A; 9V12A
- USB-A Output DC 5V/3A; 9V/2A;12V11.5A
- Wireless Output: 5W/7.5W/10W/15W
LED Indicators
- Press the Powerbank ON/OFF Button(1) once to view the remaining power capacity.
- Press the button twice to turn it OFF.
| Number of LEDs | OOOOWhiti | 000White | 00 White | 0 White |
|---|---|---|---|---|
| Capacity Remaining | about 100% | about 75% | about 50% | about 25% |
INSTRUCTIONS:
- Charging the Powerbank:
- Charge the power bank fully before usage.
- Connect the provided charging cable to a power source and to the Type-C Input (4) or Lightning Input(3) on the power bank
- Once connected the LED Indicator(2)will begin to gash white color when charging.
- Once fully charged LED will stop flashing.
- Charging Electronic Devices with the Power Bank
- Connect the appropriate cable to your mobile phone/device.
- Connect the Type-C tip or USB-A tip of a cable to Type-C Output(4) or USB-A Output(5), the LED Indicator will illuminate when charging.
- Remove the charging cable from your mobile device when fully charged.
- Charging Electronic Devices with the Wireless Charging:
-
Press Powerbank ON/OFF button(t ) LED indicator will show RED once the Powerbank is in wireless charging standby
Place wireless charging enables device on Wireless Charging Pad(6). The device will begin to charge, LED indicator will flash BLUE when charging. -
Remove your mobile device and power bank once fully charged.
-
If your wireless charging compatible device contains magnets, it would just dick to the magnetic surface(7) of the pad for better alignment to secure wireless charging.
Note: If the LED Indicator flash blue&rect an unknown object is being detected between the wireless charging pad end the phone by FOD(Foreign Object Defection). (The device will not begin to charge until the object is removed.)
SAFETY PRECAUTIONS:
- WARNING-When using this product, basic
precautions should always be followed:
- Read all the instructions before use.
- Never store or use this product in temperatures below 32°F (0°C) or above 115°F (45t).
- Do not overcharge your phone. The unit may become hot under excessive Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time.
- The unit will only achieve full performance after 2 or 3 completed charge and discharge cycles.
- To reduce the risk of injury dose supervision is required when the product is used near children.
- Do not expose the device to moisture.
- Do not use the device In excess of Its output rating. Overload outputs above the rating may result In a risk of tire or Injury.
- Do not use the device If damaged or
- Damaged or modified batteries may exhibit unpredictable behavior resulting In fire, explosion, or risk of injury.
- Do not disassemble the device. For repairs, seek a qualified service professional. Incorrect reassembly may result in a risk of fire or Injury.
- Do not expose the device to fire or excessive temperatures. Exposure to fire or temperatures above 104°F (40°C) may result in an explosion.
- To ensure product safety, ensure that qualified service professionals use only identical replacement parts.
- Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating. Please remove attachments from the phone before charging on this device.
- The strong magnetic fields of neodymium magnets can damage items such as television, computer monitors. credit cards. bank cards, computers. diskettes and other data carriers, videotapes, mechanical watches, hearing aids, loudspeakers and Pace-makers may be damaged or switch to Test Mode” In the presence of a strong magnetic force. If a pace-maker or other electrical body Implant Is In use, keep a minimum of 3 feet distance.
MADE IN CHINA