JBL Quantum 350 Wireless Headphone User Guide
- June 6, 2024
- JBL
Table of Contents
JBL Quantum 350 Wireless Headphone
In the Box
OVERVIEW
- Volume Control
- Microphone Mute / unMute
- CHARGING LED
- USB-C port
- 2.5mm jack for boom microphone
- Flat-fold ear cup
- POWER / 2.4G LED
- POWER ON / OFF slider
- 2.4G PAIRING BUTTON
- 2.4G LED
POWER ON & CONNECT
BUTTON COMMAND
First-time setup
- 6AConnect the dongle to a USB A port on your PC.
- 6B Power on the headset, which will connect with the dongle automatically via 2.4G wireless connection.
- 6C Go to “Sound Settings” -> “Sound Control Panel”.
- 6D Under “Playback” highlight “JBL Quantum350 WIRELESS” and select “Set Default”.
- 6E Under “Recording” highlight “JBL Quantum350 WIRELESS” and select “Set Default”.
- 6F Follow the onscreen instructions to personalize your sound settings.
MICROPHONE
CHARGING
LED BEHAVIOURS
TECH SPEC
- Driver size: 40 mm dynamic drivers
- Frequency response: 20 Hz – 20 kHz
- Microphone frequency response: 100 Hz – 10 kHz
- Sensitivity: 115 dB SPL @1 kHz
- Maximum SPL: 93 dB
- Microphone sensitivity : -42 dBV/Pa @1 kHz
- Impedance: 32 ohm
- 2.4G Wireless transmitter power : <10 dBm/MHz & <20 dBm
- 2.4G Wireless modulation: GFSK
- 2.4G Wireless carrier frequency : 2402 MHz – 2480 MHz
- Battery type: Li-ion battery (3.7 V / 500 mAh)
- Power supply: 5 V 1A
- Charging time: 2 hrs
- Music play time: 16 hrs
- Microphone pickup pattern: Omni-directional
- Weight: 252 g
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>