BEOK CONTROLS TDS75 Touch Screen Thermostat Instruction Manual

BEOK CONTROLS TDS75 Touch Screen Thermostat Instruction Manual

I. Product Summary:

The digital heating liquid crystal temperature controller adopts the most advanced microcomputer control chip in the world, and detects the temperature through a high-precision sensor inside the thermostat. And in real time, compared with the temperature set by the user, the load (electric heating device or valve) is automatically turned on and off to achieve the purpose of maintaining the indoor constant temperature.

II. Technical Parameter:

III. Main Functions and Characteristics

1. Large screen display and touch button
2. Power-off memory function
3. Real-time data save function
4. 5+2 or 6+1or 7days six periods program schedule
5. Anti-freezing function
6. 3 sensor modes can be setting
7. Selectable 80mmx80mm European hidden box.
8. With child lock function

IV. Button Function

V. Display and Function Description

VI. Model Specific

VII. User Interface Explanation

VIII. Wiring Diagram

IX. Thermostat Operation Instruction

Remark:
(1) The defaulted temperature of period3 and period4 is the same as period2. Please change it according to the request.
(2) When setting temperature is 00, this period is power off.
(3) How to check floor temp?
In the power on state, long press and hold M then press to check floor temp., OUT TEMP will display.

7. Advanced Setting
In the state of power-off, long press and hold M then press into advanced setting mode. Then press M to set relative item.

Remark: Antifreeze function: The thermostat is in the off state. When the indoor temperature is lower than 5 °C, the electric valve is opened. When the indoor temperature rises to 7 °C, the thermostat automatically turns off the output.

Sensor error: Please select the right sensor mode. If select the different mode or there is error of sensor, Err will display on the LCD screen, the thermostat will stop heating till the problem is solved.

Special note: installing cable please choose: plumbing 1.5-2.5mm2 hard wire.

X. WIFI Connection

Smart Life APP Download

https://apps.apple.com/cn/app/%E6%99%BA%E8%83%BD%E7%94%9F%E6%B4%BB-%E6%99%BA%E6%85%A7%E5%AE%B6%E5%B1%85/id1586125720

Click the Add Device button in the upper right corner, or click Add Device. Be sure to turn on your phone’s Bluetooth. Only 2.4G status configuration can be added for WIFI access on mobile phones (the name and password can only use numbers and letters, not symbols).
In the power off state, press up and hold on for 10 seconds.
During configuration, the short blink is valid for 2 minutes (press the up key for 10 seconds when shutting down the machine repeatedly: slow flashing indicates AP network mode).

Enter the password and click Next

Wait 1-2 minutes for the device to connect. If no, check the mobile phone, route, thermostat, and network device.

After the configuration is completed, the WiFi icon of the thermostat does not flash.

Control Page

The main screen displays six time periods, click to modify the time period and temperature parameters.

XI. Installation Instruction

This product is suitable for standard 80*80mm wall box and 60 mm European round box.

1. Open the main control board, use a 3.5mm wide vertebral slope to reach the depth of 4mm in the card slot, and lift it up slightly to open the hook.
2. Remove the back cover and power supply, wire it correctly according to the wiring diagram, and fix the back cover to the cassette with M4 screws.
3. Connect the lower cover cable to the upper cover board
4. Hang the upper two hooks at a 30-degree angle. Press the two corners below the thermostat slightly to lock the upper casing and the installation is complete.
   NOTICE: Please strictly follow the wiring diagram and do not let the water, mud and other debris enter the thermostat, otherwise the thermostat will be damaged!

XII. ATT:

Thank you for buying this product!
Please read this manual for complete instructions on installing and operating your thermostat. If you require further assistance, please feel free to contact us.

In the box you will find:

Our Service:
We offer the warranty of 24 months from the sales day.
During the warranty, if it is belong to the quality issue, we will fix or replace them for you by free after test them.
If it is not quality problem or beyond the warranty time, we will charge for the after-sales service.

Warning:

⚠ The symbol means the unit is being installed, it may cause electrical shock hazard during maintaining, so please make sure it is operated by the professional technical worker.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>