NET LED LIGHTING NET-43-03-XX LED Panel Installation Guide
- June 6, 2024
- NET LED LIGHTING
Table of Contents
LED Panel Installation Guide
NET-43-03-XX
KEY DATA
| Light Source: | LED |
|---|---|
| Part Number | NET-43-03-20 |
| Size (mm) | 595X595 |
| Power | 30W |
| Luminous Flux | 3780Im |
| Luminous Efficacy | 1201m/W |
| Colour Temperature | 3000K/4000K/ |
| 6000K | 3000K/4000K/ |
| 6000K | 4000K |
| Colour Rendering | >80 CRI |
| Housing Material | Aluminium |
| Diffuser | PS |
| IP Rating | IP20 |
| Manufacturer | Sochi Lighting |
SUPPLY/EARTH CLASS
Driver 220-240V AC 50/60 Hz Fig.1 Mains Input Termination
Luminaire 30-42V DC Fig2. Twist Lock Connectors|
---|---
Safety Information
All electrical work must be undertaken by a qualified contractor to ensure compliance with the latest edition BS7671 and IEE/IET wiring regulations.
Before installing the Ashley LED Panel Light or doing any maintenance, ensure the power supply is turned off at the circuit breaker or fuse box.
This product is designed for permanent connection to fixed wiring; the circuit should be protected with the appropriate MCB or fuse.
Environment
Please DO NOT dispose of electrical items or packaging as unsorted waste. Use the recycling facilities provided by your local authorities.
Non-replaceable light source:
The light source of this luminaire is not replaceable. When the light source reaches its end of life the whole luminaire shall be replaced.
PRODUCT DIMENSIONS
| Size(mmmm) | Ll | L2 |
|---|---|---|
| 595×595 | 595 | 595 |
| 1195×595 | 1195 | 595 |
Installation procedure: Carefully read the installation instructions and
ensure the mains supply is isolated before installation. Please follow the
safety information overleaf before carrying out any installation. Please
retain the leaflet for future reference. Important: When installing, leave a
space of at least 1.2m between the LED Panel and any heating source/air
conditioning unit.
LED Panel Installation:
Replaceable (LED only) light sources by a professional
Replaceable control gear by professional
Step 1: Carefully remove the LED Panel and driver from the packaging. Remove
the ceiling tile from the location where you want to install the LED Panel.
Step 2: Wire the flying leads from the LED Driver into the mains supply,
Fig.2.
Step 3: Connect the panel light and driver, Fig.3.
Step 4: Move the LED Panel into the ceiling aperture and ensure the LED Panel
is mounted securely, Fig.4a. Finally, turn on the mains supply to check the
panel is working correctly, Fig.4b.
Optional additional products: A number of additional mounting options are also
available.
3 Hour Emergency Kits
LED Panel Lights are compatible with our 3 Hour Emergency Kits. Units maintain
compatible Panels for 3 hours at not less than 3W
Dimming accessories
We supply DALI, Push and 1-10V dimming accessories specially calibrated for
use with LED Panel lights.
Full specifications are available on request or at www.netled.co.uk.
https://www.tridonic.com/com/en/download/technical/LCA_PRE_LC_EXC_ProductManual_en.pdf
For Dimmable and Dimmable Emergency, please refer to the above QR code for
driver wiring instructions.
Important Warranty Information
The Ashley LED Panel Light has a 3-year warranty, which can be extended free
of charge to 5 years by registering online via the website address below. The
registrant must provide the product part number and date of manufacture, which
can be found on the label attached to the luminaire housing.
NET LED Ltd. Buckingway Business Park 300
Anderson Road Cambridge CB24 4UQ
sales@netled.co.uk
www.netled.co.uk
Technical Helpline: 01223 851505
Email: support@netled.co.uk
www.netled.co.uk/downloads
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>