NET LED LIGHTING NET-33-06-XX LED Gear Tray Installation Guide
- June 6, 2024
- NET LED LIGHTING
Table of Contents
Manufactured by
LED GEAR TRAY
INSTALLATION
GUIDE
LED GEAR TRAY NET-33-06-XX
KEY DATA
Light Source| LED
Power| 16W
Luminous Flux| 1785Im / 2084m / 1901lm
Luminous Efficacy| 1121m / 138lm / 121 Im
Colour Temperature| 3000K I 4000K / 5500K
Colour Rendering| >80 CRI
Manufacturer| NET LED Lighting
SUPPLY/EARTH CLASS
Safety Information
All electrical work must be undertaken by a qualified contractor to ensure compliance with the latest edition BS7671 and IEE/IET wiring regulations.
Before installing a LED Gear Tray or doing any maintenance, ensure the power supply is turned off at the circuit breaker or fuse box.
This product is designed for permanent connection to fixed wiring; the circuit should be protected with the appropriate MCB or fuse. Environment
Please DO NOT dispose of electrical items or packaging as unsorted waste. Use the recycling facilities provided by your local authorities.
PRODUCT DIMENSIONS
All units are in mm
Important Warranty Information
The LED Gear Tray has a 3 Year Warranty. The registrant must provide the
product part number and date of manufacture, which can be found on the gear
tray along with the original purchase invoice. The Battery has a 1 Year
Warranty.
Installation procedure: Carefully read the installation instructions and
ensure the mains supply is isolated before installation. Please read the
safety information overleaf before carrying out any installation. Please
retain this leaflet for future reference.
LED Gear Tray installation:
Step 1 : Remove the Diffuser from the existing Bulkhead.
Step 2 : Remove the Gear Tray fixing screws. Keep the screws that were used to hold the existing Gear Tray in place
Step 3 : Remove the Gear Tray from the Bulkhead casing, detach the existing input power wiring from the terminal block. Insert replacement Gear Tray and connect input power wiring to the terminal block. Secure power cable
Step 4 : Insert replacement Gear Tray securing screws. Refit the Diffuser and switch on the mains supply to test that the Bulkhead functions correctly
Replaceable light source (LED only) by professional
Replaceable control gear by professional
Wiring Diagram 1
Note: A qualified electrician is required to carry out the electrical
wiring.
All wiring must be double insulated where there is a possibility of coming
in contact with live wires.
Important Battery Warranty Information
The battery has a 1 Year Warranty. To claim, you must provide the product part
number and date of manufacture, which can be found on the label attached to
Luminaire housing along with the original
purchase invoice.
Microwave Motion Sensor Configuration – These settings are only for the LED Gear Tray with Microwave Sensor option.
Please note: DIP switch in the ‘UP’ position is ON.
Detection area can be changed by selecting the combinations below on the DIP
switches. Maximum detection area 12m.| Refers to the time period the lamp
remains at 100% illumination after no motion is detected.| The sensor can be
set to only allow the lamp to illuminate below a defined ambient brightness
threshold. When set to Disable mode, the daylight sensor will switch on the
lamp when motion is detected regardless of the ambient light level.| This
refers to the time period the lamp remains at a low light level before it
completely switches off in the long absence of people. When set to ‘+03’, the
low light is maintained until motion is detected. When set to ‘Os’, the light
will turn off after hold time.
---|---|---|---
Detection Area| Full Brightness Hold Time| Daylight Sensor| 10% Corridor
Function Time
chl| ON| 100%| ch3| ON| 5S| ch5| ON| Disable| ch7| ON| Off/OS
ch2| ON| ch4| ON| ch6| ON| ch8| ON
chi| –| 75%| ch3| –| 905| ch5| –| 50Lux| ch7| | 305
ch2| ON| ch4| ON| ch6| ON| ch8| ON
ch1| ON| 50%| ch3| ON| 3min| ch5| ON| 15Lux| ch7| ON| 10min
ch2| –| ch4| –| ch6| –| ch8| –
ch1| –| 25%| ch3| –| 10min| ch5| –| 5Lux| ch7| –| Always On/.co
ch2| –| ch4| –| ch6| –| ch8| –
Default Set Up On Delivery
LED Luminaires
and Retrofit Bulbs
Licensing Program
Member
NET LEO Ltd http://tinyurl.com/ooyn6wj
NET LED Ltd.
Buckingway Business Park
300 Anderson Road
Cambridge
CB24 4UQ
sales@netled.co.uk
www.netled.co.uk
Technical Helpline: 01223 851505
Email: support@netled.co.uk
www.netled.co.uk/downloads
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>