SYLVANIA PDB1077B Portable DVD Player Instruction Manual

PORTABLE DVD PLAYER
MODEL NO: PDB1077B
Instruction Manual

IMPORTANT READ THESE INSTRUCTIONS BEFORE USE AND RETAIN FOR FUTURE REFERENCE.
SYLVANIA is a registered trademark of OSRAM Sylvania Inc. used under license.

IMPORTANT SAFETY INSTRUCTIONS

When using electronic equipment, basic safety precautions should be followed, including the following: WARNING: To reduce the risk of electric shock, fire or injury to persons:

1. Read all instructions before using the unit.
2. Use this unit only for its intended use as described in this manual.
3. Do not operate this unit if it has a damaged cord or plug, is not working properly or has been damaged or dropped. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
4. WARNING: Do not allow children to use the unit without supervision.
5. WARNING: Liquids and foodstuffs must not be spilled or dropped into the unit.
6. WARNING: It is hazardous for anyone other than a trained person to carry out any service or repair operation.
7. This unit is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the product by a person responsible for their safety.
8. Children should be supervised to ensure that they do not play with the unit.
9. Never leave the product unsupervised. Switch off the product when it is not in use, even if this is only for a short while.
10. The unit must be free-standing. It must not be placed in a cabinet.
11. The temperature of accessible surfaces may Increase when the unit Is operating.
12. This unit is not intended to be operated by means of an external timer or separate remote control.
13. If smoke is emitted, switch off and unplug the unit immediately.
14. Cleaning: Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a slightly dampened cloth for cleaning and immediately wipe dry.
15. Attachments: Use only attachments recommended by the manufacturer. Use of other attachments may be hazardous.
16. Water and Moisture: Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, laundry tub, in wet basements, or near a swimming pool and the like).
17. Ventilation: Slots and openings in the cabinet are provided for ventilation to ensure the reliable operation of the product and to protect it from overheating. These openings should never be blocked by placing the product on a bed, sofa, rug, or another similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.
18. This unit must not be exposed to dripping or splashing and objects filled with liquids, such as vases, must not be placed on the apparatus.
19. Replacement Parts: When replacement parts are required, be sure that your service technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
20. Safety Check: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to ensure that the product is in proper operating condition.
21. Overloading: Do not overload wall outlets, extension cords, or integral convenience receptacles as this may cause a fire or an electric shock.
22. When the AC/DC adapter is used as the disconnect device, the disconnect device must remain readily operable. To completely disconnect the power input, the AC/DC adapter must be completely disconnected from the mains.

Please read through this manual before making connections and operating your unit. Please retain this manual for future reference. This unit is small, lightweight and utilizes the latest state-of-the-art electronics. It is easy to install, conveniently portable and may be used at home, in the office or on holiday.

Features

• High-definition TFT LED screen
• Headphone jack
• USB/MMC/SD card slot
• Compatible with DVD,VCD,MPEG4,CD,Mp3,CD-R,DVD-RW,JPEG,etc.
• Supports playback control: play , pause, fast forward playback, fast rewind playback, etc
• Two optional aspect ratios 16:9 and 4:3
• Working voltage: DC 5V
• Bluetooth connection

PRECAUTIONS AND WARNINGS

1. Placement:

• To prevent fire or shock hazards, do not expose this appliance to rain or moisture.
• Do not expose this appliance to direct sunlight.
• Keep this appliance away from strong magnets, heat sources and excessive dust.
• Do not place this appliance on an unstable surface.
• If the unit is brought directly from a cold place to a warm one, moisture may condense inside the unit and cause a malfunction.

If this occurs leave the unit turned on for a few hours until the moisture evaporates.

2. Installation:
Ensure that the portable DVD player is installed according to the instructions and illustrations provided in this manual.
3. Caution:

• Do not drop any objects into the unit through the openings.
• Do not spill or spray liquid of any kind on or in the unit (this may result in a fire or electric shock).
• Do not place anything heavy on the unit.
• To ensure proper ventilation and proper operation, never cover or block the slots and openings with a cloth or other materials.
• Keep the unit away from open flames such as fire, candles etc.
• Install the batteries correctly as incorrect replacement is hazardous.
• Dispose of batteries in accordance with local regulations.
• The maximum working temperature is 95 degrees Fahrenheit or 35 degrees celsius.

4. No Disassembling:
Never attempt to disassemble the unit as this is very dangerous and may cause an electric shock and/or harm from exposure to the laser beam. Please refer all servicing and maintenance to an authorized service center.
5. Cleaning unit:

1. When cleaning, please make sure the unit is unplugged from the power source.
2. Do not use chemicals or detergents when cleaning.
3. Use a soft cloth lightly dampened with water to clean the exterior of the unit only and immediately wipe dry.

6. Disc handling:

• Do not leave discs near heat sources, in direct sunlight, or in high humidity.
• Store discs in their cases when they are not being used.
• Stacking discs or standing them at an angle without putting them in the case can cause the disc to warp.
• Do not touch the disc surface when handling a disc; hold it by the edges.
• Fingerprints, dust, dirt or scratches on the disc can distort the picture or reduce sound quality. Always handle carefully and make sure discs are clean before use.
• Do not stick paper or tape onto the disc.
• Do not write on the disc with a marker etc. Clean discs using a soft cloth, lightly wiping from the center outwards.
• Do not use solvents such as benzene, commercially available cleaners not Intended for CDs, or anti-static spray intended for vinyl LPs, as these may damage your disc.

NOTE: Do not use or leave the device in direct sunlight or a hot environment such as a vehicle etc. that is in hot environment. Overheating can damage the device
– Do not overcharge the device do not leave the device on the charger for very long after the battery has been fully charged.
– Device should be protected from any physical impact or damage and care should be taken not to drop the device
– Only use the factory-supplied charger. The use of an unapproved charger or cable may cause the battery to fail, explode and/or damage the device.
– Do not disassemble, puncture, crush or expose your device to temperatures above 40 ‘C/ 104 °F – Keep your device away from fire or water.
– Keep your device from moisture and extreme temperatures.
– Should your battery swell or expand, please immediately discontinue use of your device.
A probable cause is it having been overheated at some point or overcharged. Please contact us for support.

PACKAGE CONTENTS

1.  AC ADAPTOR
2. REMOTE CONTROL
3. DC CABLE
4. INSTRUCTION MANUAL
5. BLUETOOTH HEADPHONE
6. HEADPHONE CHARGING USB CABLE

FRONT/REAR PANEL

| 1. MODE
2. SETUP
3. BT PAIR
4. USB/SD
5. STOP
6.
7. VOL-
8. VOL+
9. ∧
10. ∨| 11. >
12. <
13. USB
14. CARD
15. Earphones jack
16. AV OUT
17. AV IN
18. Power ON/OFF switch
19. DC IN 5V
---|---

REMOTE CONTROL

1. MUTE
2. POWER
3. 0-9, 10+ NUMBERS
4. VOL + 5. VOL –
6. MENU
7. SLOW
8. EXIT STOP
9. REPEAT 10. A-B
11. PBC
12. ZOOM| 13. MODE
14. SD/USB
15. TITLE
16. SUBTITLE
17. AUDIO
18. RETURN
19. GOTO
20. UP
21. LEFT
22. RIGHT ►
23. PLAY ENTER| 24. PAUSE II
25. DOWN
26. FWD
27. REV
28. NEXT
29. PREV
30. INFO/SETUP
31. LCD MENU
32. PROG SEARCH
33. ANGLE
34. OSD
---|---|---

PANEL KEYS

Common key functions on the panel:
BT PAIR
Long press to disconnect BT paring and go into the searching mode, short press to switch BT device pairing. For example; If you have more Bluetooth speakers on hand and all turn on, when it is connected to first Bluetooth speaker, and this is not what you want, so you can press this button once to switch to next Bluetooth pairing.
Stop
Press to suspend current broadcast.
Play/Pause
Press once to pause play, press again to resume.
Setup
Press to enter the setup menu,then use the direction keys and OK to set the system menu.
USB/SD
Press repeatedly to switch input source: Disc/ SD card/USB mode.
Direction Keys
Use direction keys for: Previous/Next/Fast forward/ Fast rewind
OK
Press to enter the selected item or choice.
Open
Press to open the door.
Battery Installation and replacement

• Unscrew battery cover and remove.
• Properly dispose of exhausted batteries.
• Insert 2 new AAA batteries (not included).
• Be sure the positive(÷) and negative (-) ends of the batteries are facing the correct direction.
• Replace the battery cover.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

KEY FUNCTIONS

Note: Some of the following buttons are only on the remote, some are only on the unit and some are on both the unit and the remote.

Switch on / off the unit
Press repeatedly to switch between Disc, SD card, USB source input.
Press to enter/exit the setup menu.
The digit keys can be used to input numbers or to select a track or chapter number. Press to enter an item in the menu or to confirm and execute a selection.
The direction keys can be used to move the highlight in the menu.
Press button to switch to DVD or AV INPUT.
Press to switch repeat modes. (Note:This function is invalid when the PBC function is activated.)
Use to repeat specific sections of a disc. Press this button to mark the starting point(A) and press it again to mark the ending point(B) and the unit will play the selected section over and over again. Press a third time to cancel A-B repeat and resume normal playback. (Note: Points A and B must be in the same title/track).
Skip to the previous chapter/track. Skip to the next chapter/track.
Press to start playback or resume normal playback from fast forward, fast reverse, slow-motion, frame-by-frame playback, etc.
Press to temporarily pause playback; press again or press to resume the playback.
Press once to pause playback, then press to continue the playback. Press twice to stop playback and the disc will reset to the starting point.
Fast forward playback. Available speeds: 2x, 4x, 8x, 16x, 32x and normal speed. Fast reverse playback. Available speeds: 2x, 4x,  8x,16x, 32x and normal speed.
Press to enter the TIME menu. Use the digit keys to select a title, chapter, track, track time or disc time to play. Press again to exit the TIME menu.
Press this button to temporarily switch off the sound. Press it again to switch it on.
Press VOLUME+ to turn up the volume. Press VOLUME- to turn down the volume.
Press repeatedly to select the available audio languages provided by the disc (for DVD). Press repeatedly to switch the available audio channels provided by the disc (for VCD)
Press to return to the main menu when playing DVD.
Press repeatedly to switch/show the subtitles or turn off the subtitle function. (Note: this function only works if the disc is encoded with subtitles.)
Press repeatedly to switch or hide the relative information of the playing disc.
Press this button to zoom in the scene. The available zoom ratios are: 2x, 3x, and 4x. In zoomed-in mode, the direction keys can be used to move the zooming center (Note: Applies to DVD, VCD, MPEG4,etc).
Press “REV”to search backward, “FWD”to search forward.

HEADPHONE OPERATION & BLUETOOTH PAIRING

Bluetooth Overview

1. Next Trac

2. Previous Track

3. Volume –

4. Volume +

5. Menu (Short press to Play/Pause music or Answer/End a call;
   Long press to power on and Long press again to restart BT pairing)

6. MIC

7. Led Light

8. Micro USB DC 5V Charging Port

Specifications
Bluetooth Version: V3.0
Transmission Distance: 10m
Frequency: 15Hz-20KHz
Output Power: 0.25W x 2
Signal to Noise Ratio: 2 85dB
Impedance: 32 ohm (0)
Sensitivity: 38 Battery
Capacity: 3.7V 200mAh
Playing Time: 3-6 hours depends on the volume
Charging Time: 1.5-2 hours
Bluetooth pair to cellphone or computer

Before first usage, please plug the Micro USB charging cable into the USB charging port (8) on the headphone, till the red LED light is off.
Switch Power ON/OFF button(6) to ON position.

When the Bluetooth-enabled device finds it, select Sylvania SDVD103513T-B from the list of found devices.lf required, enter the password 0000. Select ok or yes to pair. After successful registration, the LED indicator light will become BLUE.
Short Press Play/Pause Button (5) to Play or Pause music /Answer or End Phone Call; Long press to restart BT pairing Long/Short Press + Button(4 )to increase Volume. Long/Short Press – Button (3) to decrease Volume. Short Press Button(1) for next track.
Short Press Button(2) for the previous track.
LED light instructions
Power on and pairing mode: blue and red LED light flashing alternately
Pairing successfully: blue LED light flash slowly C
charging mode: red LED light on
Full charged: red LED light off
Power off: LED light off

Call Operation

1. To answer a call
   If you receive the call while playing the music, you will hear the prompt tone. Press the Play /Pause button to answer the call.

2. To end a call
   Method 1. Short press Play/Pause button, to end the call; Long press to reject a call. Method 2: End from the mobile phone keyboard.
   If you are listening to music when a call comes in, the headset will switch from the music player to the mobile phone connection mode, the music will be paused. When you end a call, music will continue.

3. Double-click the button(5) to redial the last call number.

4. Long press the button(5) to reject when there is a coming call.

Connect with DVD player by Bluetooth

• Slide the Switch of on/off at ON to power on the headphone will say “power on” and the Bluetooth indicator will blinks blue and red alternatively.
• Switch on the DVD Player, the Bluetooth Indicator will blink Blue.
• Ensure there only the headphone BT is actived surrounding.
• After a while, the Headphone will automatically connect with DVD player, and the headphone will say “connected” the Bluetooth Indicator on DVD player will stay on.
• During playing, short press the button to pause, short press it again to play again. Press the v— or v+ button to adjust the headphone’s volume level.

Press and hold the N. or button to skip to the previous or next track or chapter(if available).

Charging the Headphone
The unit has a built-in Li-ion rechargeable battery, recharge it when the indicator blinks red slowly.

• Connect the Micro USB Plug from the USB Charging Cable to the Micro USB Port on the Headphone.
• Connect the full-size USB plug from the USB Charging Cable to the USB port on the Computer or USB Charger with DC 5V. (Computer, USB Charger NOT supplied)
• During charging, the Indicator on the Headphone will turn Red. When finished, it will turn off.
• It will take about 13-2 hours to finish charging, and it will play about 3-6 hours depending on the volume.

GENERAL SETUP

CHARGING THE UNIT

This player is powered by a lithium-polymer battery. It features a high ratio of energy to weight. It has no memory effect and it can be recharged at any time regardless of whether it is fully or partially discharged. It takes about six hours to fully charge the battery and a fully charged battery can be used for up to two hours.
Connect the attached AC/DC adaptor to the DC INPUT jack on the unit, then plug the adaptor into a 100-240V AC outlet.
Note: Make sure to switch off the unit before charging.The charging indicator LED will change from RED to OFF to indicate that the battery has been fully charged.

Usage and Maintenance of the rechargeable battery.

1. The working temperature of the rechargeable battery ranges from 0 °C to 45 °C
2. Always unplug the unit when it is not being used unless it is being charged.
3. Heat is inevitably produced during playback, this is normal. However, switch off and allow it to cool down.
4. Avoid banging the battery and keep it away from heat and moisture.

CONNECTING TO THE TV

This unit can be connected to a TV in order to enjoy high-quality music, movies etc with a TV. Use an AV cable to connect the AV OUT jack on the unit to the AV IN jack of a TV.
The DVD player has sound and video input jacks for connecting external audio and video inputs.

Menu Operation

1. Press [SETUP] on the remote control.
2. Press [LEFT)/ [RIGHT] to select an item.The submenu of the selected item will be instantly shown.
3. Press [UP]/ [DOWN) to select an item in the submenu, then press [OK1/[ENTER]/[RIGHT] to enter. Use [UP] /[DOWN] to select an option, then press [OK]/[ENTER] to confirm or press [LEFT] to cancel.
4. Press [UP]/[DOWN] to continue to set other items in the submenu.
5. Press [LEFT] to go back to the superior menu of the current one.
6. Press [SETUP] again and press [ENTER]/[OK] to exit the setup menu.

**GENERAL SETUP PAGE

**

There are four items in the GENERAL SETUP PAGE. They are TV DISPLAY, OSD LANGUAGE, LAST MEMORY, Text To Speech.
1.1 TV DISPLAY
4:3 PANSCAN
If the unit is connected to a conventional TV set, a wide-screen image will be displayed on the screen in its native aspect ratio with some part on the left and right cut off.
4:3 LETTERBOX
If the unit is connected to a conventional TV set, a wide-screen image will be displayed in its native aspect ratio with black borders on the top and on the bottom.
16:9 WIDE: Select this option if the unit is connected to a wide-screen TV set. A wide-screen image will be displayed in full screen in its native aspect ratio while the 4:3 image will be stretched out horizontally to fit the screen.
1.20SD(on-screen display)language
Set the on-screen display language in this item.
1. BLAST MEMORY
ON: Each time you turn off the unit or stop the disc, it will memorize the last playtime. Next time you turn on the unit and play the same disc, the unit will play from that memorized point.
OFF: Disable the last memory function.
1.4 TEXT TO SPEECH
ON: set this on, it will speech when you press any buttons.
OFF: Disable the text to speech function.

VIDEO SETUP PAGE

This menu is used to set up the picture quality of the unit.
3.1 QUALITY
Adjust items according to your personal preference.
3.1.1 SHARPNESS
There are three options (HIGH, MEDIUM and LOW) for you to choose in this item. 3.1.2 BRIGHTNESS AND CONTRAST Enter an item and use the direction keys [LEFT] /[RIGHT] to adjust the value, then press [ENTER] to confirm.

SYSTEM SETUP

**PREFERENCE SETUP

**

If there is no disc in the disc tray, the disc tray is open or the disc in the disc tray is stopped, this item is available.
4.1TV TYPE
Press to change TV TYPE (NTSC/AUTO/PAL)
4.2 AUDIO, SUBTITLE and DISC MENU
Select a preferred audio language, subtitle language and disc menu language in these items.
You can also change the audio language by pressing [AUDIO] and the subtitle language by pressing [SUBTITLE] on the remote control.
NOTE: If the selected languages in these items are not available for the currently playing disc.

4.3 PARENTAL
This item allows the user to set a maximum rating for the movies that can be viewed. Movies rated higher than the level set for the parental lock cannot be viewed without inputting the correct password. To reset the level, the correct password must be entered. The default password is 0000.
NOTE: This function only works for discs that have parental control function.

4.4 DEFAULT
Press to restore the default settings except the settings in the PASSWORD setup page and the PARENTAL item.

PASSWORD SETUP PAGE

5.1 PASSWORD MODE
Switch password function ON/OFF.
NOTE: Key in the correct password and press [ENTER] before you change the option in this item. The default password is 0000.
5.2 PASSWORD
Rest the password.
The default password is (0000) to change the parental level.

PLAYBACK

After all the connections are correctly made, switch on the unit.
Loading and Playing a Disc

1. After connecting power to the unit ,set the power switch to the ON position.
2. Push[ OPEN] to open the disc tray. Place a disc in it with the label side facing up.
3. Close the disc tray. The unit will load the disc and start playing.

MP3/MPEG4 Disc Playback

After the unit loads an MP3/MPEG4 disc, a menu showing the contents of the disc will display on the screen.

1. Press the direction key [UP]/[DOWN] to select a file or a folder.

2. 2.1 Press [OK] to enter the selected folder. The file or the folder in it will be listed instantly.
   2.2 Press [OK] to begin to play the selected file.

3. When the disc is stopped press [LEFT] to return to the superior menu.

U DRIVE &SD/MMC CARD PLAYBACK

Insert a U-drive or a card reader into the USB port. Press [USB/SD from the remote or DVD/ USB/SD from the DVD] to select USB mode to play the readable files in it. insert an SD/MMC card into the SD/M MC card port. Press [USB/SD from the remote or DVD/USB/SD from the DVD] to select MCR mode to play the readable files in it.

SPECIFICATIONS

TROUBLESHOOTING

Before resorting to maintenance service, please check the following chart.

cables are securely inserted into the appropriate jack.
Cannot advance through a movie| You can not advance through the opening credits and warning information that appears at the beginning of movies because the disc is programmed to prohibit that action.
The icon eI, appears on the screen| The feature or action cannot be completed at this time because:
1. The disc software restricts it
2. The disc software does not support the feature
3. The feature is not available at the moment
Picture is distorted| The disc might be damaged.Try another disc.
It is normal for some distortion to appear during forwarding or reverse scans.
No forward or reverse scan| Some disc have a section that prohibits rapid scanning or title and chapter skip. The movie is often programmed to prohibit skipping through the warning information and the credits at the beginning of a movie.
The player breaks down when a U-drive or memory card is inserted into the player| The connected U-drive or the memory card is probably not an original version. The player cannot play a U-drive or memory card of a non-original version.
If the player breaks down, turn it off and unplug it from the power supply. Reconnect it to the power supply and switch it on again.The player will resume normal status.

WARRANTY EXCLUSIONS

The warranty will not be valid if:

1. The product has not been installed, operated or maintained in accordance with the manufacturer’s operating instructions provided with the product.
2. The product has been used for purposes other than its intended function.
3. The product has been used for purposes other than household use.
4. The damage or malfunction of the product is caused by any of the following conditions:

• Incorrect voltage
• Accidents (including liquid or moisture damage) Misuse or abuse of the product
• Faulty or improper installation
• Mains supply problems including power spikes or lightning damage
• Infestation by insects
• Tampering or modification of the product by persons other than authorized service personnel
• Exposure to abnormally corrosive materials Insertion of foreign objects into the unit Used with accessories not pre-approved

Please refer to and heed all warnings and precautions in the User Manual.
For service assistance and product information, please call: 1 – 800 – 968 – 9853.
Pour obtenir assistance et information appelez: 1 – 800 – 968 – 9853.
Curtis International Ltd.
7045 BECKETT DRIVE, UNIT 15,
MISSISSAUGA, ON, L5S 2A3 www.curtisint.com

To make a warranty claim, do not return this product to the store. Please email support@curtiscs.com or call 1-800-968-9853.
90-day Warranty
This product is warranted to be free from defects in material and workmanship for a period of ninety (90) days from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us. If the product or component is no longer available, we will replace it with a similar one of equal or greater value. Prior to a replacement being sent, the product must be rendered inoperable or returned to us.
This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions., or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase, is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as on the specified rating on the label (e.g., 120V-60Hz).
We exclude all claims for special, incidental, and consequential damages caused by a breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.
For faster service, locate the model, type, and serial numbers on your appliance.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
• Consult the dealer or an experienced radio/IV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>