MAD CATZ HPML-4CAT0900 C.A.T. 9 Wireless Game Controller User Guide
- June 6, 2024
- MAD CATZ
Table of Contents
MAD CATZ HPML-
4CAT0900 C.A.T. 9
Wireless Game
| 
---|---
Switch
Press the pairing key for 2 seconds, LED indicator flashes until the
successful connection to Switch.
Second connection mode:
Android
1. Press “X+home” key for 2 seconds to enter Android gamepad mode. LED4
indicator flashes until successful connection.
2. Press [home] key for future reconnection after successful pairing.
iOS
Enter Apple MFI mode, press the “B+home” key for 2 seconds, LED3 indicator
flashes until a successful connection.
USB
Gamepad charging activated when connected to the host computer via USB cable.
Switch between Xinput (default) and DirectInput via pressing “+” and “-” keys
for 3 seconds.
- In Xinput mode: LED1 + LED4 indicator lights on.
- In DirectInput mode: LED2 + LED3 indicator lights on.
Turbo Function
- Turbo firing: Press (the first time) A / B / X / Y / L1 / L2 / R1 / R2 /direction key + turbo key.
- Cancel turbo firing: Press turbo key again. Press and hold turbo key for 5 seconds to clear all consecutive functions.
- Press and hold turbo key + a key to clear turbo function of the current key.
Battery
| Battery Status | Indicator Status | |
|---|---|---|
| Low power | | LED indicator
flashing
Charging| 
| LED4 indicator
flashing
Charging complete| | LED4 indicator
on
Lighting control instructions
- Tap light key to change color from blue, red, green, yellow, cyan, orange, purple, pink, magic color.
- Double click the light key to turn off lighting.
- Light key + A: Breathing lighting color. Press the light key to change color.
- Light key + B: Vibration lighting mode, the red light will be on.
- Light key + X: Rocker mode. Click the light key to change color.
- Light key + Y: Gyro mode. 6-axis in motion, all lights on. Up (red), down (yellow), left (blue), and right (green)
- Light key + L: Magic color breathing mode. (red/yellow/blue/green/purple/orange)
- Light Key + Direction key: Change brightness. Press and hold light key + up/down key to change brightness.
Automatic shutdown
Gamepad enters sleep mode when the host screen is closed and no key presses
within 5 minutes.
In Bluetooth mode, press the home key for 3 seconds to disconnect, the gamepad
will enter sleep mode.
Back key function
-
single key setting: ① press and hold MR + A (click) ② vibration occurs
③ XR key is set to A.
Macro key setting: ① press and hold MR + keys ② vibration occurs
③ XR key is set as a macro. -
Single key setting: ① press and hold ML + A (click) ② vibration occurs
③ XL key is set to A.
Macro key setting: ① press and hold ML + keys ② vibration occurs
③ XL key is set as a macro.
Motor vibration regulation
- Enhance vibration effect
- Reduce vibration effect