MAD CATZ T.E.3 Arcade Fight Stick User Guide
- June 9, 2024
- MAD CATZ
Table of Contents
MAD CATZ T.E.3 Arcade Fight Stick
CAUTION: Press to close with both hands
PRODUCT INTRODUCTION
PC INSTRUCTION
- Take out the USB-A cable from the storage space.
- Connect to PC (Windows} via the USB-A cable.
- The arcade stick enters X-input mode upon connection.
- If you wish to switch to D-input mode, hold the KEY LOCK for 2 seconds until the LED 2 flash alternately for 30 seconds then return to show the KEY LOCK status. To revert to X-input mode hold the KEY LOCK for 3 seconds.
CONSOLE INSTRUCTIONS
XBOX ONE Connection
- Take out the USB-A cable from the storage space.
- Connect to Xbox via USB-A cable, then press and hold “KEY LOCK” button for 2 seconds.
- KEY LOCK light flashes 30 seconds, connect the XBOX ONE controller to arcade stick USB port located on the back via micro-USB cable.
- Press “HOME” key on the controller to complete the connection.
PS Connection
- Take out the USB-A cable from the storage space.
- Connect to PS4/PS5 via USB-A cable, then press and hold “KEY LOCK” button for 2 seconds, connection to PSS via PS4 joystick only.
- KEY LOCK light flashes 30 seconds, connect PS4 joystick to arcade stick USB port located on the back via micro-USB cable.
- Press “HOME/PS” key on the controller to complete the PS connection.
SWITCH Connection
- Take out the USB-A cable from the storage space.
- Press A and X button on the arcade stick and connect the arcade stick to Switch.
STICK FEATURE
-
RGB LED Indication
From Left to Right: LEDl, LED2, LED3, LED4
LEDl : Power indicator, RED as power-on.
LED2 : Xbox/PS connection indicator. Red as active connection.
LED3: KEY Lock indicator, RED in key lock mode.
LED4 : Profile indicator. Profile 1 (Red), Profile 2 (Green), and Profile 3 (Blue). -
Profile
Include 3 profiles: default profile is Profilel
• Profilel • Profile2 • Profile3
Arcade stick auto-loads previous profile when turning on.
Profile (1-3) Butt on Layouts:
P r of i l e 1
| PS4| PSS| Xbox| Switch| PC
Button 1
| □| □| X| y|
X
Button 2
| 6.| 6| y| X| y
Butto n 3| R l| R l| R B| R|
R B
Button 4
| L l| L l| L B| L|
LB
Button 5
| X| X| A| B|
A
Butto n 6
| 0| 0| B| A|
B
Button 7
| R 2| R 2| R T|
Z R
|
R T
Button 8
| L2| L2| LT| Z L|
L T
Profile 2
| PS4| PSS| Xbox| Switch| PC
Button 1
| □| □| X| y|
X
Button 2
| △| △| y| X|
y
Button 3
| R2| IR2| RT| ZR|
RT
Button 4
| L2| L2| LT| ZL|
LT
Button 5
| X| X| A| B|
A
Button 6
| Q| 0| B| A|
B
Button 7
| Rl| Rl| RB| R|
RB
Button 8
| Ll| IL 1| L B| IL|
LB
Profile 3
Button 1
|
PS4
| PSS| Xbox| S wi t c h|
PC
|
X
| X| A| B|
A
B utton 2
|
0
| 0| B| A|
B
Button 3
|
R2
| R2| RT| ZR|
RT
B u tton 4
|
L2
| IL2| LT| ZL|
LT
Button 5
|
◻
|
◻
|
X
| y|
X
B u tton 6
| △|
△
|
y
|
X
|
y
Button 7
|
Rl
| Rl| RB| R|
RB
Button 8
|
Ll
| l l| LB| L|
LB
- **Turbo Switch
3-way Turbo Switch
• OFF: TURBO OFF • X1: 5Hz • X2: 10Hz**
FCC STATEMENTS
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
CANADA (IC) STATEMENTS
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device
WARNING
This product can expose you to chemical Lead which is known to the state of
California to cause cancer.
For more information. go
www.P65Warnings.ca.gov.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>