MAD CATZ M.O.J.O. M2 Performance Wireless Gaming Mouse User Guide
- June 10, 2024
- MAD CATZ
Table of Contents
M.O.J.O. M2 Performance
Wireless Gaming Mouse
User Guide
M.O.J.O. M2 Performance Wireless Gaming Mouse
Product Overview
- Left Key
- Right Key
- Scroll Wheel
- Profile Switch
- Forward Button
- Backward Button
- Slide Switch: Wireless Mode/ Power Saving Mode/Off
- Dongle Storage
Package Contents
- Mad Catz M.O.J.0 M2 x1
- QSG x1
- Warranty Card x1
- Logo Sticker x1
System Requirements
- Compatible with Windows 7 /8/8.1/ 10
- PC with USB-A 2.0 Port
GETTING STARTED
Plug & Play: Connect the mouse to an available USB port and the mouse will automatically install all necessary drivers,
DPI Settings
To adjust DPI settings, press while plugging the mouse into the USB port of
your computer.
- DPI: 400 / 800 (Default) / 1200 / 2400 /3200 / 6400. Up to 16000 DPI via software
- DPI Level: 5
Wireless Connection
- Take out the dongle stored at the back of M.O.J.0 M2
- Plug in the dongle to PC
- Slide the switch on the back of M.O.J.O M2
- modes available, wireless mode/power saving mode/Off
CAUTION
- To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture,
- Do not modify the device. Doing so will void your warranty and may accidentally damage the device.
- Stop using M.O.J.0. M2 immediately if you feel any discomfort while operating this product. If your condition persists, please call a doctor.
- This product contains small parts that may cause choking if swallowed. Not intended for use by children under 3 years of age.
For more programmable buttons, performance settings, lighting effects, surface calibration, and profile settings, download and install the software from www.madcatz.com/Downloads
TROUBLESHOOTING
Ans 1: Unplug and re-plug the USB to your computer’ s USB port.
Ans 2: If possible, try the mouse on another computer’ s USB port.
Ans 3: Use only a powered USB port.
Ans 4: Try rebooting the computer.
Ans 5: Visit www.madcatz.com for more suggestions
and assistance.
© 2022 Mad Catz Global Limited, Office H on 22nd Floor, Kings Wing Plaza 2,
No.1 on Kwan Street, Sha Tin, N.T., HK.
Mad Catz, RAT, BAT, MOJO, STRIKE, CAT, EGO, FREQ and the Mad Catz logo are
trademarks or registered trademarks of Mad Catz Global Limited, its
subsidiaries and affiliates. The shape and design of this product is a trade
dress of Mad Catz Global Limited, its subsidiaries and affiliates.
All other trademarks or registered trademarks are the property of their
respective owners. Made in China All rights reserved. Product features,
appearance and specifications may be subject to change without notice.
FCC STATEMENTS
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
CANADA (IC) STATEMENTS
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
WARNING
This product can expose you to chemical Lead which is known to the state of
California to cause cancer.
For more information, go
www.P65Warnings.ca.gov.
FCC ID: 2ASFYMM07MHINBL0000
IC ID: 24750-MM07MHINBL0www.madcatz.com