JimiloT LL301 LTE CAT1 Asset GNSS Tracker User Manual
- June 6, 2024
- JimiloT
Table of Contents
LL301
LTE CAT1 ASSET
GNSS TRACKER
User Manual
Version:V1.0
Read this manual carefully prior to use to ensure the fast and correct operation of the product. No prior notice will be given for any changes made to the appearance, color, or accessories of the product.
Introduction
Features
Power saving | Multi-GNSS positioning |
---|---|
Large-capacity battery | Remote listening |
Tamper alert | Cover removal alert |
Humidity and temperature detection and alert Spec |
IPx4 protection
Specification
Communication system:|
---|---
LL301E| LTE FDD: B1//B3/B7/B8/
B20/B28
GSM: 900/1800MHz
LL301L| LTE FDD : B1/B2/B3/B4/B5
/B7/B8/B28/B66
GSM: 850/900/1800/1900MHz
Operating current| <10m
Listening range: ≤5m| ≤5m
Operating current: <30mA| <30mA
LEDs| 1Red (work status) and
4Blue (battery level)
Operating temperature| ‒20℃ to +70℃
---|---
Dimensions (LxWxH)| 108x61x30mm
Packing List
Standard
Name | Unit | Qty | Remarks |
---|---|---|---|
Tracker | PCS | 1 | / |
User Manual | PCS | 1 | / |
Charging cable | PCS | 1 | / |
3M Tape | PCS | 1 | / |
Bracket | PCS | 1 | / |
Note: Please check the received package against the packing list. The
contents are subject to actual items. As the product is in the constant
upgrade, no prior notice will be
sent to you for any update in this User Manual.
Appearance
Note:
Once the anti-tamper button is released, a tamper alert will be triggered.
GSM LED
Status | Meaning |
---|---|
Fast blink | GSM initializing/No GSM signal/ |
No SIM card
Slow blink| Logging in to platform
Solid on| Device in a call
Note: The GSM LED goes off 3 minutes later after the device is turned on.
The GSM LED will light up by short pressing the power button of the device in
the power-on state and go off after 60 seconds.
Power LED
If the device is charging, then:
Strength | LED1 | LED2 | LED3 | LED4 |
---|---|---|---|---|
0-25% | is-ls (on-off) | Off | Off | Off |
25-50% | On | 1s‒1s (on‒off) | Off | Off |
50-75% | On | On | is-ls (on-off) |
|
Off
75-96%| On| On| On| On
Charging complete| On| On| On| On
If the device is not charging, then:
Strength | LED1 | LED2 | LEDS | LED4 |
---|---|---|---|---|
Undervoltage | Off | Off | Off | Off |
0-25% | On | Off | Off | Off |
25-50% | On | On | Off | Off |
50-75% | On | On | On | Off |
75-100% | On | On | On | On |
Note: The power LED goes off 3 minutes later after the device is turned
on.
The power LED will light up by short pressing the power button of the device
in the power-on state and go off after 20 seconds.
Notes on Work Modes
- Timed mode: In this mode, the device uploads position fixes at a fixed interval, which is configured via the location service platform or mobile app specified by your dealer.
- Smart mode (default): In this mode, the device tracks the vehicle in real-time, records the trips of the vehicle, and can differentiate moving the state from parking state. If the vehicle moves, the GPRS connection is persistent and the device will upload a position fix every 20 seconds. If the vehicle stops, the device will enter the sleep mode and no position fix will be uploaded.
- Long standby mode: The device will wake up at a certain configured interval to upload position fixes. After each upload is complete, the device will enter deep sleep and will not execute any remote query or set actions.
Tamper Alert
When the device is attached to a vehicle, the anti-tamper button will remain
press-down. If the device is detached, the anti-tamper button will spring
back, which will trigger the device to send out a tamper alert. In the long
standby mode, the device will enable tracking for 20 minutes after the alert
message is sent out. The tamper alert feature can be disabled by command.
Cover Removal Alert
When the front cover of the device is in place, the cover removal detection
switch will remain press-down. If the cover is opened, the switch will spring
back, which will trigger the device to send out a removal alert. In the long
standby mode, the device will enable the smart mode for 20 minutes after the
alert message is sent out. The removal alert can be disabled by command.
Attaching SIM and Description about Power-On and -Off
Tips:
- Activate GPRS and SMS services of the SIM card.
- Power off the device (battery switch to OFF) before attaching or detaching the SIM card.
Attaching the SIM Card
Remove the back cover by the notch, slide the battery switch to OFF, and insert the SIM.
Power-On and -Off
Power-on: Press the power button for 3 seconds (prerequisite: the battery
switch is ON).
Power-off: Press the power button for 3 seconds.
Installing the Device
The device has a strong magnet built inside. It can attach to any
ferromagnetic material. The magnet makes the installation easy. Or you can
stick the 3M tapes on one side of the device bracket, and attach the bracket
to the target object, then put the device on the bracket.
Platform Operations
After binding the device on the location service platform or mobile app
designated by the dealer, you can monitor it, configure it, and do more to it
via the platform or app.
Logging In to Service Platform
You can configure and control the device via the designated location service
platform.
Downloading Mobile App
You can download the mobile app via the URL provided by your dealer.
Precautions
Please use batteries and accessories specified by the manufacturer of the
device; otherwise, the warranty will become void.
The manufacturer of the device shall bear no warranty liabilities for any
damage resulting from the use of non-original accessories.
Do not soak the battery in water or expose it to fire. Do not bend or forcibly
open the battery.
Do not disassemble the battery as the device may be damaged if the disassembly
is done improperly by a non-professional.
Troubleshooting
When a problem arises, you can troubleshoot it with the following solution. If the problem persists, please don’t hesitate to contact your dealer or service provider.
Common issues
Poor signal
| Possible Causes| Solutions
---|---|---
The device is used in an area where radio waves are hard to reach, such as
near high-rise buildings or in a basement.| Try it in a place where satellite
signals can be well received.
Power-on failure| No SIM| Insert a SIM.
Battery switch is not set to ON.| Slide the battery switch to ON.
The battery is exhausted.| Charge the device.
Failed to access the network| The SIM card may be attached improperly.| Check
the SIM.
The metal side of the SIM card is stained.| Wipe it with a clean cloth
The SIM is invalid.| Please contact your network service provider.
The device is out of service areas.| Try it in a service area.
The signal is extremely weak| Try it in an area with strong signals.
Failed to query a location| The SIM is not activated with data service.|
Please contact your network service provider and activate the data service.
The device keeps replying with “No data found, please try again”.| Please
contact your dealer.
Warranty Instructions and Service
Special Statement
① No prior notice will be given if the product is upgraded due to
technological reasons.
② The appearance or color of the product is subject to actuality.
③ The warranty card applies to the services of repair, replacement, and refund
of the product with the following IMEI.
④ Please keep this warranty card and the original purchase receipt together in
a safe place, as these will be needed at the time of services.
Warranty Terms
For damages not caused by human factors, this warranty lasts for 2 (two) years
(including a one-year replacement service) from the date of the original
purchase.
You can choose to pay for the repair services in any of the following cases:
- The warranty card expires;
- No warranty card or valid proof of purchase;
- The product, including its accessories, is not on the warranty period;
- Damage caused by unauthorized repairs, crash, liquid spillage, the incident, accident, modifications, or incorrect voltage input; or the label, IMEI, or counterfeit mark of the product is broken or scribbled;
- Damages caused by the installation or use not in accordance with the user manual;
- Damage caused by force majeure such as fire, flood, or lightning;
- The device model is inconsistent with the warranty card or the warranty card has been altered;
- Other damages caused by force majeure.
Reminder
For vehicle trackers:
As of January 1, 2016, the warranty lasts for 2 (two) years for repair from
the date of purchase, including one year for replacement.
The specific terms are:
A full replacement, including accessories, if the product is found
defective during unpacking check;
If a defect occurs within one year after installation, then:
- Replace only the mainboard if the housing is intact and doesn’t affect normal use; or
- Replace the housing and the mainboard if the housing is defective and affects normal use (Please be noted that man-made damages will void the replacement service for the housing).
Free repair services will be given to the product if a defect is found during the second year under proper use.
Documents / Resources
|
JimiloT LL301 LTE CAT1 Asset GNSS
Tracker
[pdf] User Manual
LL301, LTE CAT1 Asset GNSS Tracker, LL301 LTE CAT1 Asset, GNSS Tracker, LL301
LTE CAT1 Asset GNSS Tracker
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>