XODO VD1 Smart Doorbell Security Camera User Manual

XODO VD1 Smart Doorbell Security Camera

Welcome
Thank you for purchasing Xodo Smart home products!
We are committed to bringing you excellence with smart technology products that make life more comfortable, convenient, and provide a more dynamic healthy lifestyle.
Your new VD1 camera is a smart home motion sensor battery doorbell that can monitor and record in low lighting conditions, detect movement and audio, and be monitored from a smart phone with the free app.

General Notice
Always make sure to follow safety instructions.

• Do not use products if they have become damaged.
• Follow instructions and only operate products in a safe environment.
• Do not disassemble or alter the product. Doing so will void the warranty.

What’s included in the box

You will find the following contents included to help you get started:

External Ringer Pairing

An external ringer has been provided and can be setup to hear the doorbell ring. This is useful in the event if no smartphone that has been configured is available, others can still hear the doorbell sound when guests arrive at the door. Configure the external ringer by long pressing the volume button for 3 seconds. Then press the btton of the doorbell to complete the pairing. For multiple connections, please note only one (1) external ringer can be connected to a smart doorbell. But a smart doorbell can have multiple external ringers. Additional external ringers are sold separately.

Specifications

• Product Name: Xodo Wireless Doorbell
• Model: VD1
• Rated Voltage: 100V-240V AC 50Hz-60Hz
• Material: PC
• Support System: Android or IOS
• Resolution: 1920 x 1080
• Recording Angle: 166 degrees
• IR LED: 6 x 850mm
• WiFi: IEEE 802.11 b/g/n 2.4GHz
• Audio: Two-way talk, noise cancellation
• Memory Type: Micro SD Card
• Storage Support: 8 / 16 / 32 / 64 GB
• Battery: 2 X 18650 (5200 mAh total)
• Monitoring: Doorbell button, motion detection, remote wake up
• Power Consumption Standby: 20 uA; Working 170 mA

Smart Doorbell Introduction

Smart Camera Components

• IR LED — Measures ambient light to brighten playback brightness.
• Light Sensor — Determines when to turn on IR sensor.
• MIC — Capture input audio.
• Button — Press to ring doorbell.
• PIR — Motion sensor will send alerts to smartphone.
• Lens — Capture video image.
• Reset Button — Setup and configuration button.
• Micro USB Port — Power supply.
• SD Card Port — Memory storage of saved photo and video clips.

Indicator Light

Blinking blue: Ready for configuration.
Red light ON: Failed to connect to WiFi.
Blue light ON: Connect to phone successfully.
Red and blue flash: Confirmation of Wifi connection.

Installation of Smart Doorbell

1. Remove the mounting bracket.
   (Remove oblique upper)

2. Mount the bracket to the wall.

3. Install the doorbell to the bracket.

4. Install the mounting screws under the bracket.

Download and Install the Xodo Smart APP
Download and install the APP. It can be also be found by searching “XODO Smart” by Contixo Inc. in the App Store (for IOS) or Google Play Store (for Android).

Open the APP
The welcome screen will appear and then you will be asked to login or register a profile. Register an account by entering your email address and setting up a profile or logging in with an existing account.

Adding Devices
You will be able to manually add a device. Select Doorbells VD1 to continue.

Detecting Device
When detecting devices manually, power on the device and confirm you hear the prompt: The Contixo doorbell is now ready to pair. (Hold the reset button for 5 seconds) Once you confirm the smart device is ready, press the
“nest step” button then click the “Next” button. Continue on to the next step. Pressing the “Resetting Devices” button will offer some troubleshooting guidelines to follow.

Connect to a WiFi network

Now you want to connect the smart device to a local WiFi network. If the proper network is not listed on this page, click the ” ” button to see a list of available networks.
Your router may broadcast both 2.4Ghz and 5.0Ghz broadband frequency. Make sure to select the 2.4Ghz Wifi.
Enter your Internet Password and connect to the network.
This step is creating the login credentials for your camera to find and access the local network, and will store the info in the QR code in the next step.

Scan with Camera Screens
The pairing process will ask for you to use the doorbell to scan a QR barcode on the screen. The QR barcode will appear on the screen. Hold doorbell camera in front of the QR barcode until you hear a prompt. Press the “I Heard a Prompt” button to continue. Pressing the “No Prompts” will provide some trouble shooting steps to help get doorbell to scan the QR barcode.

Connecting
After you hear the prompt and continue on, the “Connecting” screen will appear. It will usually register within by approximately 30 seconds.
After connecting process completes it will continue on toward the next screen.

Confirmation Screen
The smart device is added once they are communicating on the same network. You can rename the smart device by clicking on the pencil icon. You can specify the location. Press the “Done” button at the bottom of screen to continue to next step.

Home Screen Updated
Now that your device has been added, it will show on the home screen along with all other paired Xodo Smart Products. Now you are all set.

Doorbell Home Screen

The home screen will show the live camera feed along with doorbell controls.

Configure The Doorbell Settings

Different features can be adjusted from the menu button on the upper right hand button “ ” on the APP.

1. Device Name can be changed as desired.
2. Device information can check the information of the wifi doorbell.
3. Tap-to-Run and Automation allows to check the Smart Automation your device linked with.
4. Basic function settings can set below functions: Flip Screen: on/off; Time Watermark: on/off; Talk Mode: One-Way Talk/ Two-Way Talk.
5. PIR on/off switch control if the motion sensor is on. Having the motion sensor on will alert the smart device each time there is movement.
6. Power Management Settings allows to check the power status of the doorbell.
7. Purchase VAS allows to purchase cloud storage.
8. Offline reminder allows remind you when the device is offline.
9. FAQ & Feedback allows users to report issues and get help.
10. Share Device allows share the device with others.
11. Add to Home Screen allows to add the wifi doorbell to the home screen of your smartphone.
12. Device Update allows to check software or install updates to device.
13. 12. Remove device will remove the wifi doorbell from the Xodo Smart app and remove pairing. This is necessary if pairing with a new device.

Customer Service and Tech Support

Your satisfaction is important to us. We are here to help!
Contact us at support@contixo.com
Include your order number and product description.
See our website for more products www.contixo.com
We enjoy your feedback!

Xodo is a subdivision of the Contixo Inc. group., and the respective logos are registered trademarks of Contixo Inc. and may not be used, reproduced, or altered without written Permission. All other trademarks are the property of their respective owners and used with permission.
To find the latest revision of this publicaotin, visit our website at www.contixo.com

References

• XO Communications: Networking Services & Solutions | Verizon

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>