JimiloT VL502 LTE OBDII GNSS Tracker User Manual

JimiloT VL502 LTE OBDII GNSS Tracker

Product Information

1.2 Pinout
1.3 Status LED Indication
2.1 SIM Card Attachment
2.2 Installing the Device
3.1 Configuring APN and Server Parameters
3.2 Default configuration settings
4.1 Features
4.2 Basic characteristics
6.1 Special Note
6.2 Warranty Terms
6.3 Note

Product Usage Instructions

• Step 1: SIM Card Attachment
  Prepare a Nano-SIM card.

• Step 2: Installing the Device
  Place the Nano-SIM card on the SIM card tray and insert it into the SIM card slot.

Tips : After inserting the SIM card, the device will power on using the backup battery. If the device fails to power on due to low battery, you can connect the device to the OBDII connector of the vehicle to obtain power. Make sure to insert the SIM card correctly. If the SIM card is identified and requires a PIN, please disable the PIN request.

Configuring APN and Server Parameters
To ensure the device gets online and operates correctly, you are advised to check the APN and server settings. You can set the APN and the server via SMS commands if necessary.

APN settings:

1. It is recommended to contact your network operator to confirm the APN information.
2. Use your phone to send the following SMS command to the VL502: APN, apnname#
3. For example: APN, internet#

If your local APN contains a username and password, you can use the following command to set the APN:

1. Send the following SMS command to the VL502: APN, name, user, password#
2. For example APN, internet, CLENTE, AMENA#

Movement and Ignition Detection

Vehicle movement will be detected by the accelerometer. Ignition will be detected by the vehicle power voltage between 9-36V.

The device will send an alert notification to the server if one of these events happen:

• Vehicle keeps moving at speeds above the threshold for a preset duration.
• Driver steps on the brake or gas pedal hard, corners rapidly.
• The device is plugged or unplugged from the OBDII  connector.

Overview

Appearance

Pinout

Status LED Indication

Power indicator(Red)

GNSS indicator (Blue)

Network indicator(Green)

Installation

SIM Card Attachment

1. Step 1: Prepare a Nano-SIM.

2. Step 2 :Attach the SIM.

   • Place the Nano-SIM card on the SIM card tray and insert it into the SIM card slot. Tips:
     

   • After the SIM is in inserted, the device powers on using the backup battery. If the device fails to power due to low battery, you can connect the device to the OBDIl connector of the vehicle to obtain power.

   • The SIM card must be inserted correctly, If the SIM is identified and requires a PIN, please disable the PIN request.

Installing the Device

• Connecting the device to the vehicle:
  • Find OBD II Connector in your vehicle (the following figure shows most of common OBD II connector locations).

Quick SMS configuration

Configuring APN and Server Parameters

To ensure the device gets online and operates correctly, you are advised to check the APN and server settings. You can set the APN and the server via SMS commands if necessarily.

• APN settings
  It is recommended to contact your network operator to confirm the APN information. Then you can use your phone to deliver the following SMS command to the VL502: APN, apnname#
  For example
  APN, internet# Or if your local APN contains a username and password, you can use the following command to set the APN: APN, name, user, password#
  For example APN, internet, CLENTE, AMENA#

• Server settings
  It is recommended to contact your platform service provide to confirm the domain name and IP address of their serve. Then you can use your phone to deliver the following command to the VL502: SERVER, mode, domain name/IP, port, protocol#
  For example:
  SERVER,1, www.ydpat.com 8011,0#
  SERVER,0,211.154.135.113,8011,0#
  “Mode=1” means to set the server parameters via the domain name; “Mode=0” means to set the server parameters via the IP address.
  “Protocol=0” means to connect to the server using TCP protocol.

Default configuration settings

• Movement and ignition detection:
  • Vehicle movement will be detected by an accelerometer.
  • Ignition will be detected by vehicle power voltage between 9-36 V.
• The device will send an alert notification to the server if one of these events happens:
  • The vehicle keeps moving at speeds above the threshold for a preset duration.
  • The driver steps on the brake or gas pedal hard, and corners rapidly.
  • The device is plugged or unplugged from the OBDII connector.

Introduction

Features

• Communication via 4G LTE networks. Two complementary positioning systems ensure the locations to be accurately displayed on cloud platform.
• Obtains real data of the vehicle (accurate mileage, fault code, ACC status, fuel consumption statistics, battery voltage, engine speed, etc.)
• Two complementary positioning systems ensure the locations to be accurately displayed on cloud platform
• Get instant alerts for 4 kinds of dangerous driving behavior, depending on your needs.
• Instant alerts for atypical events such as car faults, collisions, overspeed, device pull-out, engine idling, low battery, geo-fence entry/exit, etc.
• Through Bluetooth connection, you can configure parameters, upgrade software, and debug.
• Ensures constant tracking in the area with poor GPS signal or even without it.
• Simply plug this device into the OBD Il socket, you don’t have to turn to professionals.

Basic characteristics

GNSS Cellular Power OBD interface Interface Physical specification Operating environment Feature

Precautions About Battery

Please use batteries that are specified by the manufacturer of the device. The manufacturer will assume no repair liabilities for damages resulting from the use of non-original accessories.

• Avoid metal objects as they may cause short circuits on battery contacts.
• Do not bend or forcibly open the battery.
• Do not soak the battery in water or expose it to fire.
• It is forbidden to use batteries that are deformed, discolored, spilled, or package-damaged.
• It is forbidden to disassemble or modify the battery.

Warranty Instructions and Service

Special·Note

• No prior notice will be given if the product is upgraded due to technological reasons.
• The appearance or color of the product is subject to the actual.
• The warranty card applies to the services of repair, replacement and refund of the product with the following IMEI.
• Please keep this warranty card and the original purchase receipt together in a safe place, as these will be needed at time of services.

Warranty·Terms

1. For damages not caused by human factors, this warranty lasts for one year starting from the date of purchase.
2. You can choose to pay for the repair services in any of the following cases:
3. The warranty card expires;
4. No warranty card or valid proof of purchase;
5. The product, including its accessories, is not in the warranty period;
6. Quality issues resulted from unauthorized repair, crash, liquid spillage, accident, modification, or incorrect voltage input; or the label, IMEI, or counterfeit mark of the device is broken or scribbled;
7. Damage caused by installing or using the device without following the instructions in this User Manual;
8. The warranty does not cover damages resulted from soaking in liquid;
9. The product model is inconsistent with that on the warranty card or the warranty card was altered;
10. Damage caused by force majeure such as fire, flood, or lightning.

Note

• For vehicle trackers
  • As of January 1, 2016, the warranty lasts for 1 (one) year from the date of purchase.
• The specific terms are
  1. A full replacement, including accessories, if the product is found defective during the unpacking check (that is, the device has neither been installed nor used);
  2. If a defect occurs within one year after installation, then:
  3. ©Replace only the mainboard if the housing is intact and doesn’t affect normal use; or
  4. @Replace the housing and the mainboard if the housing is defective and affects normal use (Please be noted that man-made damages will void the replacement service for the housing).
  5. Free repair services will be given to the product if a defect is found during the first year under proper use.

Troubleshooting

When an issue arises with the device, you can troubleshoot it by the following solution. If the issue persists, please don’t hesitate to contact your dealer or service provider.

Tsaryteiltliitneasipglnaacleswcahnere be well received.
Power-on failure| No SIM| Insert a SIM.
The battery is exhausted.| Charge the device.

Fthaeilendettwo oarckcess

| TimhperSoIpMecrlayr.d may be attached| Check the SIM.
Tishsetamineetdal. side of the SIM card| Cerlaeasenr.it with an
The SIM card is invalid.| nPeletawsoerckosnetravcicteyour provider.
Tsehrevidceevaicreais.out of cellular| Try it in a service area.
The signal is extremely weak.| Tstrryointginsiagnnalse.a with

Floacilaetdiotno query a

| |
Thitehd”eNvoicdeakteaefposunredp, lpylienagse try again”.| Pdeleaaleser. contact your

Warranty Card

Customer Information

Customer Name| | IMEI No.|
---|---|---|---
Mailing Address|
Product Model| | Phone|
Date of Purchase| | Invoice No.|
Purchased From|
Address|
Phone|

This is the basic document for warranty services. Please carefully fill in and safely keep this card

Maintenance Record

Service Start Date| Problem and Solution| Service End  Date| Customer Signature
---|---|---|---

Important

Please keep this warranty card in a safe place, as it is the proof for one- year free warranty services. If this card is lost, the Company will determine the date of purchase to be the thirtieth (30th) day after the date of production.

FCC Warning

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help
• This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>