Wiko 10 Smartphone User Guide

: June 9, 2024
: WIKO

Table of Contents

10 Smartphone
Safety information
Operation and safety
Disposal and recycling information
FCC Regulatory Compliance
Certification information (SAR)
FCC statement
Documents / Resources

10 Smartphone
User Guide

10 Smartphone

Before using the device, review and download the latest
Quick Start Guide at https://www.wikomobile.com.
To power on your device, press and hold the power button until the screen turns on.
Follow the instructions in the following figures to set up your device.

Wiko 10 Smartphone

4G service depends on the support of your network carrier and its deployment of relevant services.
Please contact your carrier to activate 4G service.
If you have inserted two SIM cards, only the default mobile data card can support data service.
4G service may be unavailable in certain areas due tonetwork interference.

Safety information

Please read all of the safety information carefully before using your device. For more detailed information, please visit https://www.wikomobile.com.

Operation and safety

To prevent possible hearing damage, do not listen at a high volume for long periods.
Ideal temperatures: 0°C to 35°C for operating, -20°C to +45°C for storage.
Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker.
If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.
Observe local laws and regulations while using the device.
To reduce the risk of accidents, do not use your wireless device while driving.
Avoid using the device in a dusty, damp, or dirty place, or near a magnetic field.
When charging, an adapter should be plugged into a socket nearby and easily accessible. Use approved power adapters and chargers.
Unplug the charger from electrical outlets and the device when not in use.
Please consult your doctor and the device manufacturer to determine if using your device may interfere with the operation of your medical device.
Adhere to any rules or regulations set forth by hospitals and health care facilities.
Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire.
Do not attempt to replace the battery yourself — you may damage the battery, which could cause overheating, fire, and injury. The built-in battery in your device should be serviced by wiko or an authorised service provider.
Keep the battery away from fire, excessive heat, and direct sunlight. Do not place it on or in heating devices. Do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in liquids, or expose it to external force or pressure, as this may cause it to leak, overheat, catch fire, or even explode.
To reduce the risk of fires or electric shocks, do not expose the adapter or accessories to water or moisture. Do not place the adapter near heat sources such as a microwave oven, oven, or radiator. Do not touch the adapter or device with wet hands. This could result in short circuits, breakdowns, or electric shocks.
Do not self-disassemble or repair the adapter. If a fault is detected, disconnect the adapter from the power source and device, and contact the authorized service center or dealer for assistance.
Follow all safety rules for children. The adapter and its cord are not toys. Some adapters’cords present a choking hazard. Keep it out of reach of children. Don’t let children put the adapter or its cord in their mouth. This adapter andcord are not for use by children.
Power off your device in any area with a potentially explosive atmosphere, and comply with all signs and instructions.
Ensure that the power adaptor meets the requirements of Annex Q of IEC/EN 62368-1 and has been tested and approved according to national or local standards.
View more safety information in the latest Quick Start Guide at https://www.wikomobile.com.
In case of failure or defect of your product, please contact your seller to be informed of the warranty process to be followed.

Disposal and recycling information

The symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects human health and the environment. For more information, please contact your local authorities, retailer, or household waste disposal service or visit the website https://www.wikomobile.com.
In case of failure or defect of your product, please contact your seller to be informed of the warranty process to be followed.

Reduction of hazardous substances
This device and its electrical accessories comply with local applicable rules on the restriction of the use of certain hazardous substances in electrical and electronic equipment, such as EU REACH regulation, RoHS and Batteries (where included) directive. For declarations of conformity about REACH and RoHS, please visit the website https://www.wikomobile.com.

FCC Regulatory Compliance

Body worn operation
The device complies with RF specifications when used near your ear or at a distance of 1cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.

Certification information (SAR)

This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA).
The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type complies with this limit.
For details about the SAR values, see “RF Exposure Information” in the latest Quick Start Guide downloaded from https://www.wikomobile.com.

FCC statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential a the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
IConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Any changes or modifications to this device not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Any changes or modifications to this device not expressly

Mexico Compliance: (This section is only applicable for Mexico).
The operation of this device is subjected to the following two conditions: (1) This device may not cause harmfulbe taken\separate separate waste collection points designated interferences; and (2) this device must accept any interferences, including those that may cause an undesired operation.
The device IMEI can be obtained by dialing *#06#.
To use the FM radio function, please connect wired earphones firstly.
For information about the IFT certification, visit Settings → About phone → Regulatory labels.

FCC ID: 2AM 86V H EM -E04
WIKO 10
VHEM-E04