JimiloT VG502 2G OBDII GNSS Tracker User Guide
- June 4, 2024
- JimiloT
Table of Contents
JimiloT VG502 2G OBDII GNSS Tracker
Instructions
The VG502 is an easy-to-install OBDII GPS tracker designed for company/official cars private ca and usage-based insurance. Featuring the driving behavior analysis (DBA) leveraging the UBI-based algorithm, this device can accurately analyze any of 4 kinds of dangerous driving behavior and support the all-around monitoring of vehicles’ real-time status. With on-board diagnostics multiple positioning systems bluetooth connectivity, and the suite of event-triggered alerts the VG502 is an ideal solution for both fleet management and private use.
On Board Diagnostics
Obtains real data of vehicle ( accurate mileage, fault code, /lCC status fuel
consumption, battery voltage. engine speed, etc.)
Driving Behavior Analysis
Get instant alerts for 4 or 8 kinds of dangerous driving behaviot depending on
your needs
Effortless Installation
Simply plug this device into the OBDII socket, you don’t have to tum to
professionals
GPS & BDS Positioning
Two complementary positioning systems ensure that locations are accurately
displayed on the cloud platform.
Multiple Alerts
Instant alerts for atypical events such as car fault, collision, speeding,
device pull-out, gee-fence entry/ exit, etc.
BLE4.0 Supported
Configure paramete upgrade software, and debug through Bluetooth connection
.
GNSS
Positioning system: GPS/BD S
Frequency: L7
Positioning accuracy: <2.5mCE P
Track sensitivity: – 762 dBm
Acquisition sensitivity: 748 dBm (cold) /-756 dBM (hot)
TTFF (open sky): Avg. hot start < 7 sec Avg. cold start < 32sec
Cellular
- Communication network: GSM
- Frequency: B2/B3/B5/B8
Power
- Battery: 760mAh/3.7V
- Input voltage: 9-36VDC
Interface
- LED indication: status indicator (Blue)
- SIM: Nano-SIM
- Data storage: 4+4MB
OBD port
- Connection: OBD II
- Data: K-Line. CAN Bus
- OBD protocols:
- ISO 9141-2 (5 baud lnlt, 70.4 kbaud)
- ISO 14230-4 KWP (fast init, l 0.4 kbaud)
- ISO 15765-4 CAN (11 bit ID 500 kbaud)
- ISO 15765-4 CAN (29 bit ID 500 kbaud)
- ISO 14230-4 KWP (5 baud lnlt, 70.4 kbaud)
- ISO 15765-4 CAN (11 bit ID 250 kbaud)
- ISO 15765-4 CAN (29 bit ID 250 kbaud)
Physical specification
- Dimensions: 61 x52x26mm
- Weight: 55g
- Operating temperature: -20’C to 70’C
- Operating humidity: 5’¾.-95%,.non:condenslng.
Feature
- Sensors: Accelerometer
- Bluetooth: Support BLE 4.0 protocol
- Ignition detection: External Power Voltage
- Scenarios: Vehicle movement alert, Over-speed alert, Geo-fence, Vehicle battery detectlol’\ Power supply disconnection
- Driving behavior analysis: Harsh accelerotiol’\ Harsh braking Harsh cornering Collision
We reserve the right of final interpretation of this leaflet. All information is for reference only and is subject to change without further notice.
Jimi IOT Co., Ltd.
Web: www.jimilab.com
Email: [email protected]