J-TECH DIGITAL JTD-653 Vertical Mouse User Manual
- June 6, 2024
- J-TECH DIGITAL
Table of Contents
J-TECH DIGITAL JTD-653 Vertical Mouse
Thank you for choosing our wireless vertical mouse.
Please read the user manual carefully when using this product.
Contents
- Wireless vertical mouse —X1
- User manual —X1
- AA battery ( optional) —X1
- USB Nano receiver (stored in the battery compartment) –Xl
Button Function
Features
- Ergonomic vertical left-handed design
- 2.4G wireless mouse, 1 Om effective distances
- Small and portable
Specification
Receiver Connection
Slide the ON/OFF button(Button 8) to the “ON” position, then plug and play.
The red light(below the side keys) will flash once if you shift the DPI to the
first gear, will flash twice when you shift the DPI to the second gear, and so
on. Also it will flash when the voltage is low.
Building Up the Connection Between Mouse and Receiver
If the connection brake off, try to rematch the code as the following steps:
Insert the receiver to device, then press the left and right button at the
same time and slide the ON/OFF button (Button 8) to the “ON” position. After
3s the mouse can work normally. If the rebuilding failed, repeat the above
steps.
Debugging Tips
- Make sure the receiver is plugged in the USB port.
- Make sure the distance between mouse and device in 1 Om.
- Make sure the ON/OFF button are slide to”ON”position
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>