Reset Cync / C by GE Camera (Indoor/Outdoor)
- June 6, 2024
- GE
Table of Contents
Reset Cync / C by GE Camera
(Indoor/Outdoor)
Factory Reset Indoor Camera
- Locate the pin hole on the back of the camera.
- Press and hold button for 3+ seconds.
- You can let go when the LED light turns red, which indicates the camera has been successfully reset
Factory Reset Outdoor Camera
- Determine the location of your pinhole based on your outdoor camera type. The Outdoor Battery Powered Camera pinhole can be located by removing the back cover. The Outdoor Wired Camera pinhole is located under the rubber stopper on the bottom of the camera.
- Press and hold button for 3+ seconds.
- You can let go when the LED light turns red, which indicates the camera has been successfully reset.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>