BaByliss AS950E Big Hair Dual Styler Instructions
- June 6, 2024
- BaByliss
Table of Contents
AS950E – B73b
User Manual
Read the safety instructions first.
HOW TO USE
- Ensure the hair is 80% dry and combed through to remove any tangles. Create your parting and divide the hair into sections ready for styling.
- Secure the selected brush attachment onto the hairstyle.
- Slide the switch to the ‘I or ‘II position to turn the appliance on and select a heat setting suitable for your hair type.
- Place the brush underneath the section close to the scalp and hold for a few seconds to boost volume at the roots.
- Use the brush to lift the hair at the roots as you dry.
- Move the brush down through the hair and start to rotate the brush away from your head by pressing and holding the appropriate rotation button.
- As you do this, resist the rotation of the brush by pulling the brush downwards. This will create tension through the section of hair.
IMPORTANT! It may take several attempts to perfect this technique, if the brush spins too quickly simply release the rotation button and remove it from the hair.
- As you reach the ends of the hair section, continue rotating the brush to roll the ends under.
- Repeat as necessary.
- After use, slide the switch to the ‘0’ setting to switch off and unplug the appliance.
- Allow the appliance to cool before storing away.
Heat and Speed Settings
There are 2 heat settings plus a cool setting. Slide the switch to the first
position to select the cool setting ‘*’, the second position for the low heat
‘I’, and the third position for the high heat ‘II’.
Please note: If you have delicate, fine, bleached or colored hair, use the
lower heat settings. For thicker hair, use the higher heat settings.
Rotation Settings
To make the brush head rotate, press and hold the buttons marked << and >>, this will make the brush head rotate clockwise and anti-clockwise.
Changing the Attachments
- To attach a brush head, place it over the body of the appliance and slide it down into position.
- Lock the brush head in place by sliding the switch on top of the brush to the locked position.
- To remove a brush head, ensure the switch on top of the brush head is in the open position.
- Gently slide the brush head up and off the unit to remove.
Protective Cover
After every use, always ensure the protective cover is placed over the brush
head. This protects the bristles from damage. When placing the protective
cover over the brush head, ensure to line it up with the grooves around the
top of the hairstyle so it slides easily into place.
Please note: The diagram on the protective cover demonstrates the direction it
should be placed on to the brush head. If placed on incorrectly it may be
difficult to remove.
CLEANING & MAINTENANCE
To help keep your appliance in the best possible condition, please follow the
steps below:
General
- Ensure the appliance is switched off, unplugged and cool. To clean the outside of the appliance, wipe with a damp cloth. Make sure that no water enters the appliance and it is completely dry before use.
- Do not wrap the lead around the appliance, instead of the coil the lead loosely by the side of the appliance.
- Do not use the appliance at a stretch from the PowerPoint.
BABYLISS SARL
99 avenue Aristide Briand
92120 Montrouge
France
www.babyliss.com
FAC 2019/04
IB-19/124A
Made in China