COOSPO H6 Heart Rate Monitor For Professional Cycling User Manual
- June 6, 2024
- COOSPO
Table of Contents
H6 Heart Rate Monitor For
Professional Cycling
User Manual
Standard Accessories
Product Introduction
H6 captures real-time heart rate data by Bluetooth and ANT+. It can pair with
your favorite training apps, GPS watches, and bike computers.
This user manual will help you to use the product better, please keep it for
reference.
Note: This product is for sports purposes only and it is not meant to
replace any medical device.
Function and Operation
Wear the Heart Rate Monitor
-
Moisten the electrode areas of the chest strap.
-
Attach the connector to the chest strap, marked ‘L’ towards left.
-
Adjust the strap length to fit tightly but comfortably. Check if the moist electrode areas are firmly against your skin and if the COOSPO logo of the connector is in a central and upright position.
Connect to the App
Turn on Bluetooth: Settings–Toggle Bluetooth to ON position.
Don’t search the device or try to pair on this page, just turn on Bluetooth
and go to the App.
About Connecting to
the ANT+ Watch
- Refer to the “Wear the heart rate Monitor” wear heart rate Monitor correctly.
- Find and add H6 in the ANT+ device list.
- Start training as prompted by the watch and check your heart rate in real-time on the display.
Both ANT+ and Bluetooth compatibility allows wireless connection to both smartphones and GPS devices at the same time or separately.
Maintenance
H6 is a high-tech instrument that should be handled with care. Please follow the caring instructions to ensure reliable measurement and maximize the life span of the heart rate Monitor.
-
Heart Rate Connector
Detach the connector from the strap after each use and dry the connector with a soft towel. Do not use cleaning chemicals. -
Chest Strap
Clean the strap under running water after each use and hang to dry.
Cleaning of straps in a washing machine or dryer is strongly prohibited.
Never use cleaning chemicals.
(Cleaning chemicals may cause rapid aging of the strap and shorten the service
life).
Do not stretch the strap or bend the electrode areas sharply.
Do not store the heart rate Monitor wet in non-respirable materials to prevent
rapid oxidation. Dry and store the strap and the connector.
Battery Replacement
-
Use a coin and twist the battery cover counterclockwise until it clicks out of place.
-
Remove battery, and properly dispose of used batteries in accordance with local environmental regulations.
-
Replace the battery positive (+) side up. Use a coin to twist the battery cover back into place.
To avoid danger,
batteries should be kept away from children.
Specifications
| Weight | 15 g |
|---|---|
| Battery Life | 400 hours |
| Heart Rate Range | 30 – 240 bpm |
| Waterproof | IP67 |
| Wireless | Bluetooth 4.0 & ANT+ |
| Size | 60 x 33.8 x 12.2 mm |
| Distance | Bluetooth: 10 m ANT+: 6 m |
| Strap Adjustable | (L) 65 – 95 cm |
Applicable Smart Phones
IOS 7.0 or above, iPhone 4s model or above
Android 4.3 or above with Bluetooth 4.0
Compatible Apps
CoospoRide, Wahoo Fitness, Endomondo, Polar Beat, Adidas Running, UA Run,
Zwift, Nike+ Run Club, or other Apps with heart rate display features.
Note: When using Nike+ Run Club, please refer to the steps of displaying
heart rate data in the App running settings.
Disclaimer
The product described in the user manual is subjected to change without prior
notice, due to the manufacturer’s further development program.
Our company shall not be liable for any damages, losses, costs, or expenses,
direct, indirect, or incidental, consequential or special, arising out of, or
related to the use of this material or the products described herein.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>