COOSPO HW807 Heart Rate Monitor for Professional Cycling User Manual
- June 6, 2024
- COOSPO
Table of Contents
COOSPO HW807 Heart Rate Monitor for Professional Cycling User Manual
Standard Accessories
-
Heart Rate Monitor with Armband x 1
-
Charging Cable x 1
-
User Manual x 1
Product Introduction
HW807 heart rate armband transmits the real-time heart rate data through Bluetooth or ANT+ to heart rate receiving device, sports and health App, helping you to manage your exercise intensity scientifically. This user manual will help you to use the product properly, please keep it for reference.
Note: This product is for sport purposes only and it is not meant to replace any medical device.
Function and Operation
Turn-on
Press the start-up button, the LED light will flash blue quickly until the heart rate was found.
Turn-off
Hold the start-up button, The LED will flash red light and vibrates, then enter the shutdown state.
Heart Rate Indicating
- Max Heart Rate (MHR) = 180 (default)
Zone| Color|
Range (Default)
---|---|---
Zone 1
| Blue|
Below 60% MHR
Zone 2
| Green| 61% ~ 70% MHR
Zone 3| Yellow|
71% ~ 80% MHR
Zone 4
| Purple| 81% ~ 90% MHR
Zone 5| Red|
Above 91% MHR
Heart Rate Alarm
If the heart rate exceeds the maximum value, the sensor will vibrate 3 times continuously.
Power
- Low Power Alert: LED flashes red and green alternately, and vibrates once.
- Charging: LED flashes green and will stay on with green when fully charged.
Wearing
Wear armband on the upper portion of the forearm. Monitor should be on the
inside or top of forearm. It should be worn snug enough (not to move on your
arm), but NOT so tight that it restricts arm circulation.
Initial Setup with Bluetooth Smart Fitness Apps
- Set Bluetooth on the device to ON.
- Find the Monitor Settings menu in the Bluetooth Smart Fitness App.
- Connect to armband by turning it on.
Initial Setup with Bluetooth Smart devices
(Sports Watches, Fitness Equipment & GYM Team Training System.)
- From the device settings menu select ＂Add HR sensor＂
- Connect to armband by turning it on.
Specifications
Weight
| 18 g
---|---
Battery Life|
20 hours each Charging
Wireless
| Bluetooth 5.0 & ANT+
Battery Type|
90 mAh lithium battery
Working Temperature
| 0 ℃ ~ 40 ℃
Size|
46.5 x 36 x 14 mm
Waterproof
|
IP67
Heartool APP Instruction
-
Please search “heartool” in Google Play or App Store and install the app.
-
Bind Your Device
Open the Heartool app and register；
Power on HW807；
Go to “Setting-Device” and click “HW807” in the Bluetooth list to connect. -
Max Heart Rate Alert Setting Please go to “Setting-Heart rate zone & alarm” to set.
Applicable Smart Phones
IOS 9.0 or above, iPhone 5s model or above
Android 4.3 or above with Bluetooth 5.0
Compatible Apps
- CoospoRide
- Endomondo
- Wahoo
- Runtastic
- UA Run
- Zwift, or other Apps with heart rate display feature.
Disclaimer
- The information contained in this manual just for reference. The product described above may be subject to alteration owing to the manufacturer’s continuing research and development plans, without making an announcement in advance.
- We shall not bare any legal responsibility for any direct or indirect, accidental or special damages, losses and expenses arising from or in connection with this manual or the contained product.
FCC statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and.
- this device must accept any interference received, including interference that may cause undesired operation.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.
- Do not open or modify the product.
- Do not disassemble or attempt to service this product.
- This product is safe under normal and reasonably foreseeable operating conditions.
- If product is operating improperly, call COOSPO support.
- Product must be returned to the manufacturer for any service or repair
Scan to Get More Languages
