COOSPO HW706-RTN-I1-2150 Heart Rate Monitor with Charging Cable User Manual
- June 6, 2024
- COOSPO
Table of Contents
HW706-RTN-I1-2150 Heart Rate Monitor with Charging Cable
USER MANUAL
Scan to Get More Languages
All About Passion
Standard Accessories
Heart Rate Monitor Charging Cable x 1 with Armband x 1
User Manual x 1
Product Introduction
HW706 transmits the real-time heart rate data through Bluetooth or ANT+ to
receiving devices, IE: sports watch, bike computer and fitness App, helping
you manage your exercise intensity in a scientific approach. This user manual
is for you to understand how to use this product, please keep it for future
reference.
Note: This product is for sports purposes only and it is not meant to
replace any medical device.
Function and Operation
Power on: Press the on/off button, LED blue light flashes quickly, the monitor
starts to get your heart rate data. As the heart rate has been detected, the
light will flash slowly.
On/Off Indicator Light LED
Start-up Button
[ Front View ]
Power off Press the on/off button when its not in use, the LED red light flashes quickly, and then it is shutdown.
Power:
1 When you press the on/off button, if the LED red light is on, it shows that
the battery is low and needs to be charged.
2 The product adopts magnetic charging, during charging, the RED and GREEN LED
light flash alternately,
after it is fully charged, the GREEN LED will be on, and then you can stop
charging it.
Charging Terminals
Heart Rate Monitor
Remove Protective Sticker
Wearing:
Wear armband on the upper portion of the forearm. The Monitor should be on the
inside or top of the forearm. It should be worn snug enough not to move on
your arm, but not so tight that it restricts arm circulation.
Wearing Position
Initial Setup with Bluetooth Smart Fitness Apps
1 Turn on Bluetooth in the phone setting.
2 Wear the Monitor correctly and press the start button.
Do not search and add devices on this page. Please add the heart rate Monitor
in the App.
Connection with ANT+ Sports Devices
(Sports Watches, Bike Computer…)
1 Add the heart rate Monitor in the ANT+ device and add list to find and add
this product.
2 Start training according to the reminder of the watch or other devices, and
check your real-time heart rate in the display screen.
The Bluetooth 4.0 & ANT+ of this product can work simultaneously. If you need
to connect to phone and ANT+ devices at the same time, please confirm the
device you connected is equipped with Bluetooth 4.0 or ANT+.
Specifications
Heartool APP Instruction
- Heartool App Installation Please search”heartool”in Google Play or App Store and install the app.
- Bind Your Device Open the Heartool app and register Power on HW706 Go to”Setting-Device”and click”HW706″in the Bluetooth list to connect.
- Max Heart Rate Alert Setting Please go to”Setting-Heart rate zone & alarm”to set.
Applicable Smart Phones
IOS 9.0 or above, iPhone 5s model or above
Android 4.3 or above with Bluetooth 5.0
Compatible Apps
CoospoRide, Endomondo, Wahoo, Runtastic, UA Run, Zwift, Opendrider, or other Apps with heart rate display feature.
Cautions
While charging, the contact point of the charging head must not be short- circuited. The following operations are not allowed.
Disclaimer
Please notice that due to the manufacturer’s further development plans, the products described in the manual may be changed without notice. Our company makes no representations or warranties with respect to this manual or with respect to the products described herein.
Our company shall not be liable for any damages, losses, costs or expenses, direct, indirect or incidental, consequential or special, arising out of, or related to the use of this material or the products described herein.
FCC statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1 this device may not cause harmful interference, and . – 11 –
2 this device must accept any interference received, including interference that may cause undesired operation.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.
Do not open or modify the product.
Do not disassemble or attempt to service this product.
This product is safe under normal and reasonably foreseeable operating
conditions.
If product is operating improperly, call COOSPO support.
Product must be returned to the manufacturer for any service or repair.