COOSPO RC905 Router User Manual
- June 4, 2024
- COOSPO
Table of Contents
RC905 Router
User Manual
User Manual
Group Training Data Hub
Version: V0.7
Product Introduction
Thank you for using this product, the product is a group training data hub, used for receiving wireless data from ANT+ and Bluetooth sports devices, and send to the web or Mobile Application by WiFi.
Product Accessories
Light and Socket Description
- WAN LED: Steady light indicates that the current communication with the server is the WAN network port.
- WiFi LED: Steady light indicates that the current communication with the server is WiFi.
- Power LED: Steady light means power on / Light off means power off.
- Reset button: Press and hold for 5 seconds to restore the factory settings, all lights will be on, and the device will be reset after the operation is completed.
- USB Type-C Power Socket: Please use the Type-C cable to connect to the 5V adapter for the power supply.
- 12V DC Power Socket: It can be powered by a power adapter or PoE power splitter.
- WAN Network Port: Connect and communicate with the server by Ethernet.
Network Setting
a. Scan QR code to download the App(HubConfig), and install the App.
(Notice: For the IOS system, it will pop up with the application security
verification when installing, please set to trust, by entering the phone
Settings Device Management Shenzhen CooSpo Tech Co., Ltd Trust)
http://fir.onecoder.com.cn/HubSetting
Basic Parameters
Wireless Communication BLE:
Communication distance 30m, standard BLE5.0
ANT+: Communication distance 30m, standard 2.4GHz ISM
WiFi: Communication distance 50m, standard 2.4G&5G Dual frequency (IEEE 802.11
a/b/g/n)
Simultaneous Scanning / Number of Connected Devices
BLE / ANT collects broadcast data and uploads to the server, it can scan up to
64 ANT+ devices with a standard heart rate profile at the same time, no limit
to the number of other types of devices. If as a central device, up to 19 BLE
devices can be connected at the same time.
Socket
WAN Socket
12v DC Power Socket
USB Type-C Power Socket
Working Temperature
Temperature 0 ~ 40 Relative Humidity 85%
Responsibility Disclaimer
- The information contained in this manual is just for reference. The product described above may be subject to alteration owing to the manufacturer’s continuing research and development plans, without making an announcement in advance.
- We shall not bare any legal responsibility for any direct or indirect, accidental or special damages, losses, and expenses arising from or in connection with this manual or the contained product. 04
FCC statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
a minimum distance of 20cm between the radiator & body.
The frequency stability of all transmission frequencies of U-NII-1, and U-NII-
2A meets the 47 CFR FCC Part15.407(g) requirements, and the manufacturer
states that their transmissions remain within the U-NII-1 and U-NII-2A bands.