Synkitt NL1800 Smart 3D Illusion Lamp User Manual
- June 15, 2024
- Synkitt
Table of Contents
Synkitt NL1800 Smart 3D Illusion Lamp
- Please read all instructions and warnings before use.
- These instructions are for your safety and to ensure you obtain the best performance from this product.
- Save these instructions for future reference.
- Free download “Synkitt” to control lamps by app with fun.
- Synkitt ” APP supports IOS 10. 0 or later and Android 5. 0 or later.
Available on the Apple Store or Google Play Store, search “Synkitt
Product Specifications
- Input Voltage: 4.5V – 5V
- Power Input: USB Cable (included) or 3 x AA Batteries (not included)
- Output Power: 0.5-1W
Safety Instructions
- This product is for indoor use only.
- Before inserting the acrylic plate into the base, please remove the transparent protective film from both sides.
- Do not touch the acrylic plate surface with your fingers as this will leave marks and may affect the 3D illusion.
- To insert batteries, slide off the battery cover, insert new batteries, and replace the cover.
- Rechargeable batteries are to be removed from the product before being recharged and should be recharged under adult supervision.
- Do not mix standard and rechargeable batteries or new and old batteries.
- Always insert batteries with the correct polarity.
- Exhausted batteries are to be removed from the product immediately.
- Always switch the lamp off overnight or if left unattended.
- Caution: The product contains small parts. Not suitable for children under 3 years.
- Warning: Risk of strangulation. Loose cords and cables can present a strangulation risk to babies and children. Always ensure babies, children, cots, and playpens are kept out of reach of cords and cables, at least 1 meter away.
How to Use
- Remove the transparent protective film from both sides of the acrylic plate.
- Plug in a USB cable to the power supply/computer or insert batteries.
- Press the power button to change color. Each time the power button is pressed, the lamp will change color.
- There are 7 colors (red, green, blue, yellow, cyan, purple, and white) plus an alternating option.
- Press the power button once on color-changing mode to turn it off.
- Free download ” Synkitt” from Apple Store or Google Play Store to control by Mobile App with more fun.
- Please scan the QR code to download the APP:
Cleaning Instructions
- Wipe acrylic with a clean soft cloth.
- Do Not: Use abrasive cleaners as they will damage the surface.
Function Connection Description:
- After installing the “Synkitt” app on the mobile phone and plugging in the base, the Bluetooth can be turned on under the phone setting column.
- There is no need for a Bluetooth connection operation, and the product can be controlled on the “Synkitt” app interface.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used under the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>