BLACK BOX KVMC4K-2P USB-C 4K KVM Switch User Manual
- June 6, 2024
- BLACK BOX
Table of Contents
USER MANUAL
KVMC4K-2P
4K 2-PORT KVM SWITCH, USB C, DISPLAYPORT
24/7 TECHNICAL SUPPORT AT 1.877.877.2269 OR VISIT
BLACKBOX.COM
CHAPTER 1: SPECIFICATIONS
TABLE 1-1. SPECIFICATIONS
| SPECIFICATION | DESCRIPTION |
|---|---|
| Approvals | FCC, CE, VCCI, RoHS |
| Video Resolution (Maximum) | 3840 x 2160 @ 60 Hz (4:4:4) |
| Connectors | Computer Interface (Video and USB input): (2) USB Type C; |
Console Interface:
USB 3.0 Port: (1) USB Type A (front), (1) USB Type A (rear);
USB HID Port: (1) USB Type A (front), (3) USB Type A (rear);
Video Output: (1) DisplayPort
Indicators| (4) LEDs:
(2) Computer Ready LEDs (green);
(2) Computer Selected LEDs (red)
User Controls| (1) Pushbuttton (for selection);
(1) Mode Switch:
4K @ 60 Hz + U2 (picture oriented);
4K @ 60 Hz (4:2:0) +U3 or 4K @ 30 Hz (4:4:4) + U3 (USB speed oriented);
Keyboard Hotkeys
Automatic Scan Interval| 3, 8, 15, 30 seconds
Power Supply| 9 to 12 VDC
Dimensions| 1.6” H x 8.7” W x 5.2” D (4 x 22 x 13 cm)
Weight| 1.35 lb. (0.615 kg)
NOTE: Switch between 3G and 6G modes ONLY when power is NOT connected.
CHAPTER 2: OVERVIEW
INTRODUCTION
The 4K 2-Port KVM Switch with USB-C, DisplayPort allows two USB-C enabled computers to share multiple USB peripherals (four HID devices plus two USB 3.0 devices).
FEATURES
- Allows two Type-C (DP Alt Mode) Devices to share USB Console and Peripherals ([4] HID devices + [2] USB 3.0 devices)
- Supports maximum resolution of 3840 x 2160 @ 60 Hz (4:4:4)
- Enables Keyboard and mouse plug and play without drivers
- Has front-panel buttons/hotkey for easy computer selection and auto-scan function
- Offers selectable scan time function
- Supports Windows and Mac with no software required
- Select between 4K 6 G + USB 2.0 (picture oriented) and 4K 3G + USB 3.0 (USB oriented)
- Features front USB/USB HID design for easy access of USB devices
WHAT’S INCLUDED
- (1) KVM Switch
- (1) power adapter with necessary AC cord or (1) plug-in power adapter
- (1) set of foot pads
SYSTEM REQUIREMENTS
Console side:
- (1) DisplayPort monitor
- (1) USB Keyboard
- (1) USB mouse
Computer side:
- (1) USB-enabled computer
- (1) USB Type-C cable
HARDWARE DESCRIPTION
Figures 2-1 and 2-2 show the front and back panels of the 4K 2-Port KVM Switch with USB-C, DisplayPort. Tables 2-1 and 2-2 describe their components.
FRONT PANEL
FIGURE 2-1. FRONT PANEL OF THE KVMC4K-2P
TABLE 2-1. FRONT-PANEL COMPONENTS
| NUMBER IN FIGURE 2-1 | COMPONENT | DESCRIPTION |
|---|---|---|
| 1 | Port Selection button | Press the button to select a computer |
| 2 | Port Status LEDs | Green: Computer connected (Power On); |
Red: Computer selected (Power On)
3| USB 3.0 port| Links to USB 3.0 device
4| USB HID port| Links to USB HID device (keyboard, mouse, etc.)
BACK PANEL
FIGURE 2-2. BACK PANEL OF THE KVMC4K-2P
TABLE 2-2. BACK-PANEL COMPONENTS
| NUMBER IN FIGURE 2-2 | COMPONENT | DESCRIPTION |
|---|---|---|
| 1 | Console Video port | Connects to DisplayPort monitor |
| 2 | USB Type C port | Connect to PC’s Type C port |
| 3 | Power supply | Apply appropriate 12 VDC power to KVM switch |
| 4 | USB HID port | Links to USB HID device (keyboard, mouse, etc.) |
| 5 | USB 3.0 port | Links to USB 3.0 device |
| 6 | Mode Select switch | Switch between 3G + USB 3.0 and 6G + USB 2.0 |
NOTE: Switch between 3G and 6G modes ONLY when power is NOT connected.
CHAPTER 3: INSTALLATION
Before installation, power off all devices that will be connected to this system.
- Make sure that all devices you will connect are properly grounded.
- Place cables away from fluorescent lights, air conditioners, and machines that are likely to generate electrical noise.
CONSOLE CONNECTION
- Plug the monitor(s) into the Console Video port; plug a USB keyboard and USB mouse into the corresponding USB HID ports on the Console.
COMPUTER CONNECTION
- Use Type-C cable(s) to connect the computer and the unit’s PC side.
- Plug the power adapter from an appropriate DC power source to the switch power port.
CONNECTION PATTERN
Figure 3-1 shows a typical installation of the 4K 2-Port KVM Switch with USB-C, DisplayPort.
*KVM’S TYPE C CONNECTOR DOES NOT SUPPLY POWER.
POWER SUPPLY IS REQUIRED FOR MAC PRO.
**REQUIRES 10 GB USB C CABLES
FIGURE 3-1. TYPICAL INSTALLATION
CHAPTER 4: HOTKEYS
HOTKEY CONTROL
TABLE 4-1. HOTKEY CONTROL
| KEY SEQUENCE | FUNCTION |
|---|---|
| “Ctrl” + “Ctrl” + “1–2” | Selects the computer at port 1 – 2 |
| “Ctrl” + “Ctrl” + “F1” | Start Auto Scan |
| “Ctrl” + “Ctrl” + “F2” | Start Manual Scan: Allows users to manually switch |
back and forth between powered-on computers.
Press the up-arrow or down-arrow key to select the previous or the next
computer.
“Ctrl” + “Ctrl” + “F3”| Adjust Scan Rate: The KVM switch generates 1 to 4
beeps indicating duration of scan time for 3, 8, 15 and 30
seconds respectively.
“Ctrl” + “Ctrl” + “F7”| Turn ON/OFF the USB-Port Rule (USB device follows
selected computer or not)
FIGURE 4-1. SAMPLE KEYBOARD
NOTE: Do not use the keypad on the right of the keyboard.
ALTERNATIVE HOTKEY COMMANDS
In addition to the Left Ctrl + Left Ctrl hotkeys, there are two alternative hotkey sequences available.
-
For the following operations, users may press Scroll Lock twice instead of pressing Left Ctrl twice.
♦ To select a computer:
Press “Scroll Lock” + Press “Scroll Lock” + Press “1”
(Example: Select the computer at port 1.)
Press “Scroll Lock” + Press “Scroll Lock” + Press “2”
(Example: Select the computer at port 2.) -
For those keyboards do not have or support Scroll Lock, press and HOLD the Left Shift and press Num Lock twice instead of pressing Left Ctrl twice.
♦ To select a computer:
Hold Left “Shift” + Press “Num Lock” + Press “Num Lock” then release shift + Press “1”
(Example: Select the computer at port 1.)
Hold Left “Shift” + Press “Num Lock” + Press “Num Lock” then release shift + Press “2”
(Example: Select the computer at port 2.)
NOTE: Do not use the keypad on the right of the keyboard.
APPENDIX A: REGULATORY INFORMATION
A.1 USA FEDERAL COMMUNICATIONS COMMISSION STATEMENT
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designated to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance to the instructions, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required to take whatever measures necessary to correct the interference at their own expense.
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Dell Networking is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications in the equipment. Unauthorized changes or modification could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
A.2 NOM STATEMENT
APPENDIX A: REGULATORY INFORMATION
A.3 CE MARK
This product conforms to European Standard EN 55032, EN 55024, EN 61000-3-2, EN 610003-3.
A.4 JAPAN VCCI COMPLIANCE FOR CLASS A EQUIPMENT
This is a Class A product. In a domestic environment this product may cause radio inferference, in which case the user may be required to take corrective actions.
A.5 ROHS
You must recycle or discard this product according to applicable local and national regulations. Black Box encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Waste Electrical and Electronic Equipment (WEEE) Directive for Recovery, Recycle and Reuse of IT and Telecommunications Products This product is labeled in accordance with European Directive 2002/96/EC concerning waste electrical and electronic equipment (WEEE). The Directive determines the framework for the return and recycling of used appliances as applicable throughout the European Union. This product is not to be thrown away, but rather reclaimed upon end of life per this Directive.
APPENDIX B: DISCLAIMER/TRADEMARKS
B.1 DISCLAIMER
Black Box Corporation shall not be liable for damages of any kind, including, but not limited to, punitive, consequential or cost of cover damages, resulting from any errors in the product information or specifications set forth in this document and Black Box Corporation may revise this document at any time without notice.
B.2 TRADEMARKS USED IN THIS MANUAL
Black Box and the Black Box logo type and mark are registered trademarks of
Black Box Corporation.
Any other trademarks mentioned in this manual are acknowledged to be the
property of the trademark owners.
NOTES
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL SUPPORT
1.877.877.2269
© COPYRIGHT 2021. BLACK BOX CORPORATION. ALL RIGHTS
RESERVED.
KVMC4K-2P_USER_REV2.PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>