BLACK BOX WMD-1075FAN-U Wallmount Cabinet 4 Inch Fan Kit User Manual
- June 4, 2024
- BLACK BOX
Table of Contents
BLACK BOX WMD-1075FAN-U Wallmount Cabinet 4 Inch Fan Kit
FIGURE 1-1: FAN FRONT VIEW
PACKAGE CONTENTS
- (1) Fan Assembly
- (2) Blank Plates
- (12) M6 Screws
- (12) M6 Nuts
FAN FRONT VIEW
TABLE 1-1. GENERAL SPECIFICATIONS
SPECIFICATION| DESCRIPTION
Weight| 2.9 pounds (fan and two plates)
Fan plate dimensions (HxWxD)| 5.25” x 10.75” x 1.75”
Power| 115 VAC, 15.5 / 14.5 watts
RPMs| 2600/2900
Color| Black
Hertz| 50/60
Fan dB level| 37/41 dB (2600 / 2900 RPM)
Fan cord and AWG| 6 feet/(18 AWG/2)
Plug| 2-prong NEMA, 5-15 polarized
Air Flow| 100 CFMs
INSTALLATION
The Fan assembly can be installed in the wall mount cabinet in any one of the
four possible mounting locations. See illustration below.
After you select the vent opening for the fan assembly in the cabinet, use the
hardware supplied and follow the M6 screw and nut installation.
Finally, use the two blanking plates and hardware and select which two of the
three vents you wish to block. This will leave you with one empty vent to pull
air into the cabinet. 
APPENDIX A: REGULATORY INFORMATION
FCC STATEMENT
This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this Quick Installation Guide, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case, the user will be required to correct the interference at his/her own expense.
CE STATEMENT
This is a Class B product in a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
ROHS
This product is RoHS compliant.
APPENDIX B: DISCLAIMER/TRADEMARKS
DISCLAIMER
Black Box Corporation shall not be liable for damages of any kind, including,
but not limited to, punitive, consequential or cost of cover damages,
resulting from any errors in the product information or specifications set
forth in this document and Black Box Corporation may revise this document at
any time without notice.
TRADEMARKS USED IN THIS MANUAL
Black Box and the Black Box logo type and mark are registered trademarks of
Black Box Corporation.
Any other trademarks mentioned in this manual are acknowledged to be the
property of the trademark owners.
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7 TECHNICAL SUPPORT 1.877.877.2269 BLACKBOX.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>