D-Link U2000 5G Mobile Hotspot User Guide
- June 10, 2024
- D-Link
Table of Contents
U2000 5G Mobile Hotspot
User Guide
Technical Support Setup Procedure
How to set up DWR-U2000 5G Mobile Hotspot manually using its web GUI?
-
Connect your mobile device via Wi-Fi (By default, enter the password located on the label sticker at the back of the router)
-
If this is your first time installing the Mobile Hotspot, use a web browser and type in http://192.168.0.1 in the address bar. Enter the Admin Password and click login to start the configuration process. The web address and default admin password are printed on the device label at the bottom of the device. By default, the admin password is admin
Note: If you have changed the password and cannot remember it, you will need to reset the router to factory defaults. -
You will be prompted to Home Screen
-
Click on Mobile then click Basic Setup on the left-hand panel. Then, Select the preferred Network Mode (5G/4G/3G, 5G NSA/SA, 5G SA only, 4G/3G, 4G only)
-
Click Save
-
Select APN. Then, input APN and APN type as required by your carrier. Also the Username and Password (if any)
-
Click Save.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>