Klim B09BJTDTPB Portable CD Player Walkman User Manual
- June 6, 2024
- KLIM
Table of Contents
B09BJTDTPB Portable CD Player Walkman
User Manual
| | |
---|---|---|---
IMPORTANT SAFETY INSTRUCTIONS
Please read this manual carefully before using this player and keep it for later reference.
THE CD PLAYER
- If the player fails to work, please contact our customer support team on support@klimtechnologies.com, our staff will be happy to resolve your problems. Remember that the KLIM Discman is supported by our warranty.
- The device cannot be used or stored in moist environments. Keep the device away from any liquid, steam, etc.
- Do not place any liquid or unintended objects other than CDs into the player.
- Do not expose the device to sunlight over long periods of time and keep it away from heaters. The player is not intended to be stored or used in high-temperature environments.
- All professionals with extensive electronic knowledge and maintenance experience are allowed to disassemble the player for maintenance. The replacement of spare parts must be done in strict accordance with the parameters of the circuit design.
- Do not scratch or hit the player with sharp objects.
- There are light-emitting diodes in this device. Do not look directly into the lens; such exposure may cause permanent eye damage.
- Children under the age of 12 should be supervised by an adult when using this device.
BATTERY
Do not disassemble the device or charge the device with power adapters that do not meet the electrical parameters of this product to avoid permanent damage. For your safety, please handle the built-in high-capacity polymer lithium battery by following the instructions below:
- Do not remove the battery pack.
- Do not drop or expose the device to any physical impact.
- Do not short circuit or pierce the battery.
- Do not place the player under ambient temperatures above 131°F (55°C).
- Do not put the battery in a fire.
- If the battery has been damaged, ask a professional to replace the battery with the same specifications, or contact our customer support team.
HEARING SAFETY WARNINGS
Adjust the volume to an appropriate level. If the volume is too high, it may
damage your hearing or even cause permanent damage. You should increase the
volume slowly until a comfortable, clear sound can be heard.
Listening to an audio device, even at a reasonable volume, may cause hearing
damage if done for extended periods of time. Please use the device in
moderation and allow for adequate rest for your ears.
PACKAGE CONTENTS & PRODUCT DIAGRAM
CD Player | Earphones accessories |
---|---|
USB to Type-c charging cable | User manual |
KLIM Fusion earphones | Carry bag |
3.5 mm AUX cable |
1. Display screen | 11. PROG |
---|---|
2. Bluetooth | 12. TF card slot |
3. Previous track / Rewind | 13. Charging port (DC 5V) |
4. Play/Pause | 14. Charging LED |
5. Next track / Fast forward | 15. Power ON / OFF |
6. Stop | 16. Headphone port 1 |
7. DIR | 17. Headphone port 2 / Antenna |
8. FM (radio) | 18. Volume controller |
9. MODE | 19. OPEN |
10. EQ | 20. HOLD switch |
TECHNICAL SPECIFICATIONS
Size | 145 x 145 x 28 mm | conversion | 16 Bit |
---|---|---|---|
Weight | 245 g | Sampling frequency | 44.1 kHz |
Power source connection | USB-C | Frequency response | 20 Hz – 20 kHz |
Charging voltage | DC 5V/1A | Earphone power output | 16 mW / 16-320 ohm |
Operating voltage | 3.7 V | Earphone impedance | 32 ohm/16 mW |
Power consumption | 1 .5 W Nominal | Supported disc formats | CD, CDR, HDCD, MP3 |
Battery | Lithium-ion polymer | ||
3.7V/2000 mAh | Shockproof time | CD: 100 seconds Mpa 180 seconds |
CONTACT AND TROUBLESHOOTING
Please refer to page 7 for common issues and solutions when operating the KLIM Nomad. In case you require additional assistance or have any questions, please write us directly to our email address at support@klimtechnologies.com.
FIRST USE
HOW TO INSERT A DISC
Push the OPEN button on the right to open the cover. Before first use remove
the protective cardboard to reveal the lens. Insert your index finger into the
center hole of the disc and take the edge of the disc with your thumb. Keep
the labeled side upward while inserting the disc into the CD player and press
the disc gently to lock it in place.
Close the disc cover completely, otherwise, the player will not read disc.
To remove an inserted disc, gently pull it upwards from the side.
Note: The player is only compatible with CD, CDR, Mp3, HDCD formats.
USING A TF CARD
After inserting a TF card into the corresponding slot, press and hold the MODE
button to enter TF card playback mode.
NOTE: the TF card slot only supports cards up to 32GB of capacity.
USING EARPHONES
Only earphones with a 3.5 mm jack are compatible with this device. In order to experience the best sound quality, please use the included KLIM Fusion or similar high-fidelity headphones. You may connect two headphone sets simultaneously, one in each port.
HOW TO TURN ON THE PLAYER
The power switch is located on the side. Slide it to the ON position to play normally. When the last track in a disc is played or there is no disc in the unit, the player will enter standby mode after 20 seconds. Press the PLAY button again to restart the player.
HOW TO TURN OFF THE PLAYER
There are two ways to turn off the player:
- Move the power switch to the OFF position if the player will not be used for an extended period of time.
- The player will enter standby mode by pressing the STOP button twice in succession. On standby, the player will continue to consume some power, since it is not completely switched off.
IMPORTANT: while on standby mode, press the Play/Pause button to reactivate the player.
CHARGING THE PLAYER
This product is equipped with one charging cable. You can use any charger that
supports USB 2.0 protocol or standard USB charger to charge the player.
Note: the low battery sign flashes on the screen when the battery level
is low.
Charging time: It takes around 4 hours to fully charge the player (this
varies depending on the power output). When the battery is being charged, the
LED indicator is red. Once the player is fully charged, the LED indicator will
turn green.
PLAYBACK OPTIONS
HOW TO CONNECT BLUETOOTH DEVICES
- Turn on your Bluetooth headphone/speaker and make sure that the Bluetooth function is turned on.
- Turn on the KLIM Nomad player and press the Bluetooth button to activate the Bluetooth function ( )
- Select the “BT Search” option using the ( ) and ( ) buttons, then press the PLAY button to start searching for available Bluetooth devices to pair with.
- Press the PLAY button to select the name of your device that needs to connect to.
- Once the device is successfully paired, press the Bluetooth button to return to the play interface.
SAVING TRACK PRESETS
- Press STOP to stop all playback.
- Press the PROG button to enter programming mode. The screen changes as depicted on the right.
- Press ( ) and ( ) to select the track you want to save, then press PROG to save it.
- Repeat step 3 until you have assigned all the tracks. You can assign up to 32 tracks.
- Press PLAY while in programming mode to start playing your track selection.
To exit programming mode, press the STOP button.
NOTE: the preselection is not stored in memory. Once you leave the
programming mode, you’ll need to reprogram all tracks again.
HOW TO PLAY AN MP3 DISC
Press DIR to choose different folders if there are multiple folders on the
inserted disc.
PLAYBACK SETTINGS (REPEAT MODE)
Press the MODE button to change the playback mode:
Repeat once ( 1 ). Repeat all ( ALL), random playback
(RAND), track preview (INTRO), OFF.
During track preview, the first 10 seconds of each track is played before
moving to the next track.
FM RADIO
- Connect the headphones to the AUX 2 port : they will act as an antenna and increase the signal reception. You can also connect a detachable 3.5 mm antenna (not included).
- Press the FM button ( ) to enter Radio mode.
- Press the PLAY button and the player will start searching for stations and storing them automatically. Once the search has finished, it will play the first station detected.
- Use the ( ) and ( ) buttons to change stations.
Note: press the MODE button to change the frequency manually. Press the FM button to exit Radio mode.
OTHER FEATURES
KEY LOCK
After playback mode and sound effects have been set up, you can use the HOLD
switch underneath the unit to disable all function buttons (except the volume
controller), in order to avoid any unwanted operation.
CONNECTION TO OTHER SPEAKERS
Use the included 3.5 mm male-to-male cable to connect the CD player to other
devices such as external speakers, amplifiers, headphones, etc. You can also
connect it to your car’s audio system via the AUX port.
NOTE: connection via USB port is not supported. Refer to your audio
system’s manuals for further instructions.
WARNING: do not manipulate the CD player while driving. Always keep your
attention on the road!
VOLUME ADJUSTMENT
The volume controller is located on the side of the player. Flick it to the
left or right to decrease or increase the volume. Remember to select an
adequate volume level to prevent any harm. Listening to loud sounds for long
periods of time may cause permanent hearing damage.
DIGITAL EQUALIZATION
Press the EQ button to change the equalization. There are a total of 5 presets BBS, POP, JAZZ, ROCK, and CLASSIC.
TROUBLESHOOTING
Problems | Reasons | Solutions |
---|---|---|
The CO player does not turn on | The power switch is not in the ON position. |
Toggle the power switch to the ON position.
Buttons are locked.| Make sure the HOLD button of the bock of the player is in
the OFF position.
The CD player is out of battery| Charge the CO player.
The player is damaged.| Contact us or osk a professional for repairs.
The disc
cannot be read| The disc is installed incorrectly.| 1. Make sure the label
side of the disc is facing up.2.Ensure the disc is inserted fully into the
place.
The earlier running hp rprnani7Prl
formats.| Check the format. The player is only compatible with CD, CDR. MP3
and HDCD f
The disc is dirty or damaged.| 1. Make sure the disc is not heavily scratched
or damaged.
2. Wipe the disc gently from the center towards the edge with a clean, soft
cloth
3. Try another disc to check if the other one is faulty.
The lens is dirty.| Wipe the lens gently with a cotton swab. NOTE: DO NOT
TOUCH THE LENS WITH YOUR HANDS
The CO player isn’t charging| There is no current in the outlet.| Make sure
the power outlet is working.
The charger is domoged.| Replace the charger with another one matching the
specifications (0C 5V/1A).
The player is domoged.| Contact us or ask a professional for repairs.NOTE:
While charging. make sure that the power source and the charging voltage are
DC 5V/1A. Excessive voltage input may cause overload damage.
Tracks skip while playing| The disc is scratched.| Use a dry cloth to clean
the disc, or try another disc to see it works well.
The player is subject to vibration or bumps (i.e. while in the car)| Keep the
CD player stable while playing a CD.
Authorized EU representative
Marcus Excelsior Limited
Bracken Road No 51, Carlisle Offices
D18CV48 Dublin, Sandyford
Dublin, Ireland
Marcus Excelsior Limited
2512 Longhorn Place Office Tower
8 Argyle Street, Mongkok, Kowloon
Hong Kong