TMRW CA1821 Readerboard Instructions
- June 5, 2024
- TMRW
Table of Contents
TMRW Life Sciences, Inc.
250 Hudson, Suite 701 New York, NY, 10013
tmrw.org/contact-us
CLIENT SUCCESS
Contact for general inquiries into our service or products.
Phone: 917-525-3453
E-mail: info@tmrw.org
TMRW READERBOARD
Cryopreservation Identification and Tracking Device
DEVICE DESCRIPTION
The TMRW RFID ReaderBoard is a custom circuit board component that integrates
the TMRW At-theRobot (ATR) software and the Witnessing System.
INTENDED USE
To read stored information on RFID enabled containers
INTENDED USERS
The intended users of the RFID Readerboard are laboratory professionals
including embryologists, andrologists, clinicians, laboratory technicians, and
laboratory management personnel. Patients do not interact with or come into
contact with TMRW products. The patient population served is men and women,
typically age between the ages of 18 years to 50 years at the time of
fertility tissue collection.
CONTRAINDICATIONS
None.
ADVERSE EFFECTS
None.
STORAGE
Store at room temperature.
DISPOSAL
Discard at an e-waste facility. There are no lithium batteries used to
operate, nor are any toxic components used in the manufacturing of the
Readerboard. The PCB assembly is lead-free.
WARNING
Always use appropriate personal protective equipment (PPE) and follow your
laboratory’s standard operating procedures and safety guidelines when working
with liquid nitrogen (LN2). The RFID Readerboard requires electricity to
function. Use standard caution and care around electrical connections and
cords to prevent bodily harm from electrical shock or damage to the machine.
CAUTION Always use proper power and proper electrical compliant
connections in accordance with the local electrical code.
INSTRUCTIONS FOR USE
-
With a CryoGrid located in the left CryoBath and an additional CryoGrid or CryoTransporter located in the right CryoBath (Figure B), refer to the lower screen.
-
Wait for the RFID Readerboard to map the CryoBeacons in the CryoGrid and CryoTransporter.
-
Wait for the RFID Readerboard to map the CryoBeacons in the CryoGrid and CryoTransporter.
-
If you have additional CryoBeacons for this procedure, repeat Step 2 and Step 3.
Note: For specimen vitrification, you can use the CryoTransporter or your preferred cryogenic container. If you choose to use the CryoTransporter for vitrification, the angled slot in the front allows for easy and safe loading of your cryo device into the CryoBeacon. The CryoTransporter provides sufficient LN2 depth to plunge cryo devices during vitrification.
NOTICE
1. FCC CFR 47 15.19
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
2. FCC CFR 47 15.21
Caution: any changes or modifications to this device not expressly approved by
TMRW Life Sciences, Inc. could void the user’s authority to operate the
equipment.
3. FCC CFR 47 15.105 INFORMATION TO THE USER
4. (a) For a Class A digital device or peripheral, the instructions furnished
to the user shall include the following or a similar statement, placed in a
prominent location in the text of the manual:
Note: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
5. FCC RADIATION EXPOSURE STATEMENT:
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. The equipment should be
installed and operated with a minimum distance of 20cm between the radiator
and your body.
ISED STATEMENTS
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license exempts RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-3 (A) / NMB-3 (A)
This Class A digital apparatus complies with Canadian ICES-003.
7. RADIATION EXPOSURE STATEMENT: ISED
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
greater than 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>