STIHL Wet Sandblasting Device Instruction Manual
- June 6, 2024
- STIHL
Table of Contents
Instruction Manual
Guide to Using this Manual
Warning Symbols
Meanings of warning signs on the sand and wet-blasting kit:
Observe safety notices and take the necessary precautions.
Read, understand and keep the User Manual.
Wear safety glasses.
Applicable Documents
The local safety regulations apply.
► In addition to this User Manual, read, understand and keep the following
documents:
- Instruction manual of STIHL pressure washer being used
Videos
| stihl.com/sxbyL2|
---|---|---
User Information
Main Parts
A
- Tube
- Suction tube
- Hose
Safety information
The sand and wet-blasting kit is used for wet blasting of masonry and metal
parts. STIHL recommends using STIHL granules or other blasting granules with a
grain size of 0.8 mm for sand and wetblasting kits.
Only suitable for use with STIHL RE series pressure washers.
The pressure specification (pmax) and temperature specification (tmax) of the
pressure washer must not be higher than the pressure specification and
temperature specification on the accessories.
Assembling
► Fixing the sand and wet-blasting kit
B.
Working
► Immerse the suction tube into the granules
B.
► Move the sand-wet jet evenly along the surface to be cleaned.
After finishing work
► Remove suction tube and press lever of spray gun
C.
► Lift the suction tube and press the lever of the spray gun until the
granules are flushed out of the sand and wet-blasting kit
C.
Cleaning
► Clean the sand and wet-blasting kit with a damp cloth.
0457-367-0040-B
www.stihl.com
0457-367-0040-B. VA0.D21.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>