RAVPOWER RP-PB232 PD Pioneer 30000mAh 90W 2-Port Power Bank User Manual

RAVPOWER RP-PB232 PD Pioneer 30000mAh 90W 2-Port Power Bank

Thanks for purchasing RAVPower products. Please read this User Manual thoroughly before use of the product and retain it for future reference.

PRODUCT DIAGRAM

SPECIFICATIONS

15V 3A, 20V 3A, 60W Max
PD Output| 5V 3A, 9V 3A, 12V 3A,
15V 3A, 20V 4.5A
iSmart Output| 5V 3A, 9V 2A, 12V 1.5A
Total Output| PD 65W + iSmart 18W, Total 83W Max
Rated Capacity| 20V 4.5A, 4800mAh

USING YOUR POWER BANK

Charging Your Power Bank (Fig.1)

1. Charge the power bank via the PD port.

2. The LED indicators will light up progressively.
   Note:

   • It is recommended to fully charge the unit before first use.

   • Unplug the charging cable when charging has completed.

Charging Your Device(Fig.2)

1. Connect your device to the power bank via the iSmart or PD port accordingly.

2. Charging will start automatically.
   Note: Unplug the charging cable when charging has completed

| Checking the Battery Level
Press the Power Button to check the battery level.
---|---

WARRANTY

|

• 18 Month Warranty.
• Life-time Support.

---|---

| This warranty is void if the defect is caused by:

• Damage caused by force majeure.
• Accidental damage, misuse, abuse, neglect.
• Improper repair or alteration by unauthorized persons.
• Expired warranty period.

IMPORTANT SAFETY INSTRUCTIONS

WARNING – When using this product, basic precautions should always be followed, including the following

a) Read all the instructions before using the product.
b) To reduce the risk of injury, close supervision is necessary when the product is used near children.
c) Do not put fingers or hands into the product.
d) Do not expose power bank to rain or snow.
e) Use of a power supply or charger not recommended or sold by power pack manufacturer may result in a risk of fire or injury to persons.
f) Do not use the power bank in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons.
g) Do not use the power bank that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
h) Do not disassemble the power bank. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
i) Do not expose a power pack to fire or excessive temperature. Exposure to fire or temperature above 100°C may cause explosion. The temperature of 100°C can be replaced by the temperature of 212°F.
j) Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
k) Switch off the power bank when not in use.
l) Do not place or use this product in high temperature or damp environment. Do not expose it to the sun.
m) Dispose the power bank according to the local statues environmental protection regulations.

SAVE THESE INSTRUCTIONS

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

WEEE Compliance
DO not to dispose of product as unsorted municipal waste and to collect such WEEE separately, for proper treatment, recovery and recycling, please take this product(s) to designated collection points where it will be accepted free of charge. Please contact your local authority for further details of your nearest designated collection station.

NORTH AMERICA
[email protected]

MANUFACTURER
Manufacturer: Shenzhen NearbyExpress Technology Development Co., Ltd.
Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>