micmi PLSM001 Wifi Mini Plug User Guide
- June 6, 2024
- micmi
Table of Contents
micmi PLSM001 Wifi Mini Plug
DISPOSAL
The MEMS DATA CAPTURE WAND+ must not be disposed of in the landfill.
At the end of its life, the MEMS DATA CAPTURE WAND+ must be deposited in a
container dedicated to the recycling of electronic equipment that contains
batteries. If users do not have access to the appropriate recycling facility,
your local Michelin MEMS representative is able to provide a container
dedicated to the purpose of collecting MEMS equipment.
CONTACT
For more information or assistance, please contact the Michelin MEMS representative for your country.
- Brasil, Chile & Perú:: +55 (21) 36 21 4646
- USA, Canada & México:: +1 864 458 5000 :
- Australia : +61 3 86 71 1003
- South Africa: +27 115 790 300
- Russia+7 495 258 09 26
- China : +86 21 22855000
- Europe : +33 4 73 32 20 00
Features, specifications are subject to change without notification.
MFP MICHELIN © 2021 All rights reserved.
PRODUCT NOTICE
PRODUCT NAME
MEMS DATA CAPTURE WAND+ Zone2 – Part Number CAI 166184
PRODUCT DESCRIPTION
The MEMS DATA CAPTURE WAND+ receives, via internal antennas, pressure and
temperature data transmitted by the MEMS sensors. This information is to be
forwarded to the MEMS EVOLUTION4 mobile application through Bluetooth Low
Energy, together with any messages that may require corrective action to be
taken in order to maximise the service life of the tire.
The MEMS DATA CAPTURE WAND+ is also able to read UHF RFID tags according to
ISO18000-6c
PRODUCT SPECIFICATION
Radio Frequency Characteristics
- RF sensor reception : 433.92 MHz
- Trigger for sensor : 125 Khz
- BLE frequency: 2.4 GHz
- RFID reader : 902 – 928 MHz
Electrical Performance
- Battery: Li-ion rechargeable 7.4V, 2600mAh (UN3480)
- Typical battery performance:> 3 weeks in stand-by mode > 8 hours in normal operation
Charging parameter
- Use DC 12v / 1A charger 12W max- The DC supply must be ES1 and PS2 according to IEC62368-1 standard
- plug Jack 5.5 x 2.1 x 12 mm DC
- Indoor operation within temperature range: 0°C / +40°C (32°F / +104°F)
- Typical battery charging time: 4.5 hours to achieve full charge
Physical Characteristics
- Approximate dimensions: Long= 250mm Width=95mm Height=50mm
- Approximate weight: 400g
Operating Conditions in normal Autonomous mode :
- Temperature: -20°C to +40°C (-4°F to / +104°F)
- Indoor or outdoor use – IP 44
IP44 means product is protected against ingress of solid foreign objects ≥1mm and against ingress of water with harmful effects splashing
Storage condition :
- Temperature 1 year : -20°C / +25°C (-4°F / 77°F)
- Temperaure 3 months : -20°C / +45°C (-4°F / 113°F)