AIE USBCDPLAY3 Electronics Premium USB Driven Instruction Manual
- October 27, 2023
- AIE
Table of Contents
AIE USBCDPLAY3 Electronics Premium USB Driven
Product Layout
DIGITIZING CD MUSIC TO 12 DISC INTERNAL MEMORY
To have full control and operation of your CD music from your factory radio, you must Digitize the CD. Follow these steps to do this
-
Step 1 Load CD into slot. Wait for CD to be recognized. Once recognized, the CD will Auto Start. Please allow 4 seconds to pass of Auto play before attempting to digitize.
-
Step 2 Once 4 seconds has passed, simply push the RECORD BUTTON and the unit will display COPYING. The unit will give a display showing the amount of songs on the disc and which song has begun digitizing.
1-12 **This shows song 1 of 12 and song 1 is digitizing -
Step 3 The unit digitizes the media at 3X speed so a 3 minute song will complete in 1 minute. Once the entire disc has completed, The unit will turn off automatically. You will be able to display and access the CD player memory from your factory radio. Simply leave the unit in the OFF position and access your USB or AUX input selection on your factory radio.
PLAYING MUSIC WITHOUT DIGITIZING (PLAYING REAL-TIME)
This unit is equipped with a REAL-TIME CD playback mode. On the rear of the unit, a AUX Audio 3.5mm output cable is provided. This will need to be connected to the AUX audio 3.5mm input of your factory radio.
Step 1 To play music with the CD player WITHOUT digitizing, simply load a CD into the player. The CD will auto play and once started make sure you select AUX on your factory radio. In addition, you MUST make sure the AUX audio output cable is connected to the vehicles provided AUX audio input.
NOTE This function will only permit controls of song changing and controls either from the CD player itself or the provided wireless remote control.
INTERRUPTED CD DIGITIZING
If the process of digitizing is interrupted by turning off the player, the unit has LAST POSITION MEMORY where by once you restore power to the unit, you simply push the REFRESH button on the player. The CD will resume playback then push the CIRCLE RECORD button again and it will pick up where it left off.
DIGITIZING OR PLAYBACK OF SCRATCHED OR DAMAGED CD’S
This unit is designed to read discs in fair to moderate condition as well as new. In the event the media is damaged or unrecognizable by the player, the unit will skip over that song and proceed to the next track. Please make a note of this. Ex. A DISC may have 12 songs on it but if 4 are damaged, on 8 of the 12 will be digitized.
FAQs
Will this function on Audi vehicles equipped with mmi, mib-3, and olufsen systems?****
Yes, it will because it is a universal application, and its goal is to provide you with a successful CD player installation outcome regardless of the car design.
I’ve used a variety of this CD player’s iterations. Why do they stop playing after an hour, necessitating that I give the player 45 minutes to chill down?****
I have no idea why yours stops functioning. Mine continues to play for a while in between pit stops.
Can an AIE USBCDPLAY3 USB CD drive be used in a vehicle?****
Most likely, the latest model of your car has a USB port. A USB adaptor for a CD player should be purchased and connected. You ought to consider a power source. Choose a player with battery power or look for a plug-in wire that your car will accept.
How can I operate my car’s AIE USBCDPLAY3 CD player?****
Put your favourite CD in the CD player after it has started. Two ends of aux cables are connected to your portable CD player and your car’s aux port, respectively. The “AUX” option on your car’s sound should be selected. Turn up the volume on your CD player and select “PLAY.”
Are AIE USBCDPLAY3 CD players still installed in automobiles?****
Practically all new cars lack a CD player as standard equipment. Contrarily, infotainment systems with a plug-in or Bluetooth capability are far more common.
What are automakers using to replace AIE USBCDPLAY3 CD players?****
In practically all new cars, multiple USB ports are now standard. You can purchase an external CD drive with a USB port. By connecting this to your car, you can continue to enjoy listening to all of your favourite CDs. Prior to purchasing an external CD drive, compare pricing.
Why are AIE USBCDPLAY3 CD players still used in cars?****
According to Autoweek, the CD player’s demise began about ten years ago. Since then, a few automakers have kept the CD players and the nostalgic images of drivers putting those little, metallic discs into their dashboards.
How can an AIE USBCDPLAY3 car CD player play a CD without power?****
If your stereo has a “force eject” feature, you should use it to eject the CD. If this doesn’t work, attempt once more after starting the car. Some CD players in cars could not function when the engine is off. For these players, try depressing the power and eject buttons while the engine is running.
How is an AIE USBCDPLAY3 automobile CD player cleaned?****
To get rid of all the loose dust and dirt, use a soft-bristled brush. To get rid of small particles, use a compressed air can or an electric fan. Wipe the surface of the CD player panel with an interior cleaner.
How is an AIE USBCDPLAY3 CD player released?****
While adjusting your ignition to the accessory power position, press and hold the EJECT button. To get both discs to come out of the player at once, try gently putting a blank disc about an inch into the player and repeatedly pushing the EJECT button.
Which AIE USBCDPLAY3 CD player will fit my Hyundai Palisade the best?****
To determine whether item fits in your car, look at the description. I followed the directions exactly, and it worked.
What caused the AIE USBCDPLAY3 CD player in my car to malfunction?****
The CD’s dirty or damaged tracks are commonly the fault for this. Before deciding that the player is the problem, test a couple more recent CDs to see if the skipping behaviour continues. If not, you’ll need to look into cleaning or mending the disc itself so that it can play normally once more.
What does the AIE USBCDPLAY3 CD player’s focus error mean?****
The eye that scans the data lines on the disc is having trouble, which is what this signifies. It needs to be cleaned and calibrated by experts before it can start working again.
Why does the CD player AIE USBCDPLAY3 report an error?****
Ensure that the playback side of the disc is facing down when putting it into the disc tray. The player could be unable to read a disc if it is scratched, broken, or unclean with fingerprints or smudges. Clean the disc with a gentle, dry cloth to solve the problem.
How long does an AIE USBCDPLAY3 CD player last?****
Hi-fi systems, or at least the speakers, turntable, and amplifier components of those systems, should last much longer, roughly 10 to 20 years. Although they can survive five to 10 years, CD players don’t last as long.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>