MIDLAND C1424 Bike Guardian Wi-Fi Dash Cam User Guide
- June 6, 2024
- MIDLAND
Table of Contents
C1424 Bike Guardian Wi-Fi Dash Cam
User Guide
The equipment is free use in all UE countries.
All trademarks and registered trademarks are the property of their respective owners.
Main features:
- Camera: Dash cam
- Resolution: FulIHD 1080p / HD 720p/VVVGANGA
- IP68 rating
- Cycle recording
- Photo:12MP
- Video:1080p 30fps
- Wide angle 170°
- Frequency: 2.4GHz
- Wi-Fi output power: 0.37W
- Battery life: 60 min.
Controls description
- Lens
- Blue LED power on
- ON button
- Red LED recording
- Photo/REC control
- Screw cap
- Microphone
- Micro SD slot
- Recharge connector
- Mode selector
- Reset
What’s in the box
- USB cable
- Waterproof USB cable with rubber gaskets
- Lock mount with spare screws
- Bi-adhesive mount composed of: GO-PRO adaptor, screw, quick release mount, flat mount with bi-adhesive
- Handlebar mount
- Suction cup mount
- Allen wrench
Battery recharge
BIKE GUARDIAN WI-Fl can be recharged by connecting the USB cable to a pro-per charger or to a PC (you can use both cables supplied in the package: waterproof cable or the one suitable for the PC connection). While charging, the blue led will be on and will turn off when the recharge is full.
Recording / operating modes
On the rear side of the camera there’s a selector suitable to set the operating mode. BIKE GUARDIAN can work in two operating modes: video and photo.
Video mode
The camera automatically starts recording when it’s powered and stops
recording when the power is switched off. When the microSD card is full, BIKE
GUARDIAN WI Fl continues recording by deleting the older files.
If the camera is not powered, just turn it on by pressing the red button
(Photo/REC) and it will start/stop recording.
Photo mode
Turn on BIKE GUARDIAN WIFI and press Photo/REC to take a photo.
Micro SD
It is recommended to format the micro SD card: turn the camera on and press
the red button till the red led switches off.
Turn off and then on the camera.
Supports micro SD cards from 8 up to 64 GB, but we suggest using 32GB SD. We
recommend:
to use class 10 U3 high speed or higher SD cards.
to regularly delete data from the memory card.
Downloading files from PC
Connect the camera to PC. It will be automatically recognized as webcam.
To switch to Mass storage mode, press shortly the Power button.
“VISION BANK” App
The VISION BANK Cam APP allows you to control the camera remotely using a
smartphone or tablet.
Press the Wi-Fi button on the rear side of the camera and activate the Wi-Fi.
In the Wi-Fi settings of your smartphone or tablet, connect to the network “SSID: Bike Guardian Wi-Fi”. Edit the password “12345678”.
To download the complete user manual and for information about the warranty, please visit www.midlandeurope.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>