milwaukee M12 Sal-0 1720mm 12v Li-Ion Redlithium Cordless LED Stand Light Instruction Manual

: June 4, 2024
: Milwaukee

Table of Contents

milwaukee M12 Sal-0 1720mm 12v Li-Ion Redlithium Cordless LED Stand Light
MAINTENANCE
- SYMBOLS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

milwaukee M12 Sal-0 1720mm 12v Li-Ion Redlithium Cordless LED Stand Light

TECHNICAL DATA BATTERY-LAMP M12 SAL

Lighting time with one fully charged battery (6.0 Ah)
High Level …………………………………………………………………………………………………….. 4 h
Low Level ……………………………………………………………………………………………………… 10 h

Luminus flux

High Level …………………………………………………………………………………………………….. 1400 lm
Low Level ……………………………………………………………………………………………………… 700 lm
Colour rendering index (CRI)………………………………………………………………………………..80
Colour temperature…………………………………………………………………………………………….. 4000 K
Battery voltage…………………………………………………………………………………………………… 12 V
Rated Power input ……………………………………………………………………………………………… 15 W
Weight without packing and battery ………………………………………………………………………. 3,0 kg
Weight according EPTA-Procedure 01/2014 (2.0 Ah / 3.0 Ah) ………………………………….. 3,2 kg
Weight according EPTA-Procedure 01/2014 (4.0 Ah / 6.0 Ah) ………………………………….. 3,4 kg
Recommended ambient operating temperature ……………………………………………………… -18…+50 °C
Recommended battery types……………………………………………………………………………….. M12B
Recommended charger ………… C12C,M12C4, M12-18AC,M12-18C, M12-18C3, M12-18FC,…

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.

SAFETY INSTRUCTIONS

Remove the battery pack before starting any work on the appliance.
Do not dispose of used battery packs in the household refuse or by burning them. Milwaukee Distributors oﬀer to retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects (short circuit risk).
Use only compatible Milwaukee chargers from the same battery platform for charging battery packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact with battery acid wash it oﬀ immediately with soap and water. In case of eye contact rinse thoroughly for at least 10 minutes and immediately seek medical attention.
Warning: Do not direct the light beam at persons or animals and do not stare into the light beam yourself (not even from a distance). Staring into the light beam may result in serious injury or vision loss.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualiﬁed person.

SPECIFIED CONDITIONS OF USE

The Battery-lamp is intended to be used light independent use away from mains supply.
Do not use this product in any other way as stated for normal use.

BATTERIES
Battery packs which have not been used for some time should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged, after used.
To obtain the longest possible battery life remove the battery pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and away from moisture Store the battery packs in a 30% – 50% charged condition
Every six months of storage, charge the pack as normal.

BATTERY PACK PROTECTION LI-ION BATTERY
The battery pack has overload protection that protects it from being overloaded and helps to ensure long life.
Under extreme stress the battery electronics switch oﬀ the machine automatically. To restart, switch the machine oﬀ and then on again. If the machine does not start up again, the battery pack may have discharged completely. In this case it must be recharged in the battery charger.

TRANSPORTING LITHIUM BATTERIES

Lithium-ion batteries are subject to the Dangerous Goods Legislation requirements.
Transportation of those batteries has to be done in accordance with local, national and international provisions and regulations.

The user can transport the batteries by road without further requirements. Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations. Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.

When transporting batteries:

Ensure that battery contact terminals are protected and insulated to prevent short circuit.
Ensure that battery pack is secured against movement within packaging.
Do not transport batteries that are cracked or leak.

Check with forwarding company for further advice

MAINTENANCE

The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualiﬁed person.
Use only Milwaukee accessories and spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the machine type printed as well as the six-digit No. on the label and order the drawing at your local service agents or directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.

SYMBOLS

CAUTION! WARNING! DANGER!
Do not stare at the operating light source.
Please read the instructions carefully before starting the machine.
Class III electrical protection.
Do not dispose electric tools, batteries/rechargeable batteries together with household waste material.
Electric tools and batteries that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
Check with your local authority or retailer for recycling advice and collection point.
European Conformity Mark
British Confomity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark