TRIPP LITE NPOE-EXT-2X1G30 2-Port Gigabit Waterproof Hardened and Tamper-Proof PoE Extender-Repeater User Guide
- June 6, 2024
- Tripp Lite
Table of Contents
Quick Start Guide
2-Port Gigabit Waterproof, Hardened, and Tamper-Proof PoE
Extender/Repeater
Model: NPOE-EXT-2X1G30
WARRANTY REGISTRATION
Register your product today and be automatically entered to win an ISOBAR®the
surge protector in our monthly drawing!
1111 W. 35th Street, Chicago, IL 60609 USA
tripplite.com/support
Copyright © 2021 Tripp Lite. All rights reserved.
Package Includes
- NPOE-EXT-2X1G30 2-Port Gigabit PoE Extender
- Wrench
- (x3) Waterproof Connectors
- Quick Start Guide
Product Features
- Supports Power over Ethernet so no external power supply is needed
- Supports true 10/100/1000 Mbps data transmission and PoE power supply distance up to 330 ft. (100 m)
- Includes one RJ45 95W PD input
- Two output ports have a Power Sourcing Equipment (PSE) function, with each port supporting up to 30W
- Industrial-quality housing handles harsh environmental conditions with high stability and reliability
- IP67 waterproof rating
- IK10 impact protection rating against tampering and vandalism
- Complies with IEEE 802.3, 802.3u, 802.3ab, 802.3at, 802.3bt and 802.3x standards
- Unit supports plug-and-play operation with no additional configuration needed
Hardware Description
Front Panel
The front panel includes the PSE output port, input port and LED indicator.
Left Panel
The left panel includes the input port (PoE In) and grounding column with
standard network Cat5e cable (line diameter 5.5 mm).
Right Panel
The right panel includes the output port (PoE Out), to be used with a standard
network Cat5e cable.
Installation
Carefully read and follow all instructions to avoid device damage and security threats that could result from incorrect installation.
- The nuts of the waterproof joint should be tightened fully to the joint threads and fit level to the hexagon plane to prevent water from damaging your equipment
- To avoid damage, do not place the unit on an unstable surface
- Make sure the operating voltage is the same one labeled on the unit
- To avoid the risk of electrical shocks, do not open the chassis while the unit is operating or when electrical hazards are present
Desktop Installation
To install the unit on a desktop, place the bottom side (shown below) of the
unit on a stable, solid surface.
Wall-Mounted Installation
- Fix four screws (not included) on the wall and turn the unit upside down.
- Align the four fixing holes of the unit as shown below and mount the unit on the screws.
Single Extender Installation
Note: Prior to connecting the RJ45 cable to input/output ports, install the
included cable glands onto the cable. Refer to Cable Wire and Crimp Steps
below.
- Using a Cat5e/6 cable (up to 328 ft. / 100 m long), connect your powered source device (such as a PoE switch) into the “IN” port on the unit.
- Using another Cat5e/6 cable (up to 328 ft. / 100 m long), connect your remote PoE powered device (PD), such as a VoIP or IP surveillance camera, into the “OUT” port on the unit
Notes:
- Your PoE source must meet or exceed IEEE 802.3at / 802.3af standards.
- When power is required, the power source (e.g. midspan or PoE injector) must be installed between the Ethernet switch (non-PoE source) and the first NPOE-EXT-2X1G30 extender.
- If you are installing an injector and a splitter, they each need to support 60 to 90W.
Single Extender Installation Diagram
Single Extender Installation with Midspan Diagram
Multiple Extender Installation
Notes:
- You may only cascade three PoE extender units up to 1312 ft. (400 m) in a single installation.
- Prior to connecting the RJ45 cable to input/output ports, install the included cable glands onto the cable. Refer to Cable Wire and Crimp Steps below.
- Using a Cat5e/6 cable (up to 328 ft. / 100 m long), connect your powered source device (such as a PoE switch) into the “IN” port on the unit.
- Using another Cat5e/6 cable (up to 328 ft. / 100 m long), connect the “OUT” port of the first extender to the “IN” port of the second extender.
- Repeat Step 2 up to two more times for each additional PoE extender you add, or connect your remote PoE powered device (PD) to the “OUT” port of the second PoE extender.
Notes:
- The third PoE extender will only supply IEEE 802.3af up to 7W.
- Your PoE source must meet or exceed IEEE 802.3at standards.
Multi-Extender Installation Diagram
Cable Wire and Crimp Steps
Installing Cable Gland with RJ45 UTP Cable
Step 1: Disassemble the cable gland as shown below:
Step 2: Slip the Ethernet cable through the clamping nut and gland body. Tighten the clamping nut and the body to make the two parts into one complete cable gland.
Connecting Waterproof Cable Kit to the Outdoor PoE Extender
Step 1: Insert the RJ45 connector into the connector of the PoE++ In
Port.
Step 2: Turn clockwise to tighten the gland body with the Outdoor PoE
Extender.
Step 3: Attach the clamping nu t to the cable gland to complete the
cable assembly.
Step 4: Repeat Steps 1 to 3 for two PoE+ Out Ports
Specifications
Model|
NPOE-ECr-2%1(130
---|---
Standard| IEEE802.3. IEEE802.3u, IEEE802.3ab. IEEE802.3x. IEEE80 2.3a1 .
IEEE802.3at. IEEE802.3bt
Ports| PoE In Port: 1 x 10/100/1000 Mbps RJ45 PoE Out Port: 2 x 10/100/1000
Mbps RJ45
Network Media (Cable)| 10BASE – T: UTP category 3. 4, 5 cable (S100m) 100BASE
-TX: UfP category 5. 5e cable (5100m) 1000BASE -TX: UTP category 5e cable
(5100m)
LED Color| Green
LED Functions| Off: No deAce is connected to the corresponding port
Illuminated: Indicates the link through that port is successfully established
at10/100/1000Mbps.Blinking: Transmitting data and power
Dimensions| 5.9 x 2.9 x 1.7 in. (150 x 73 x 44 mm)
Weight| 0.93 lbs. (0.42 kg)
PoE Ports| 2
Power Supply| Power over Ethernet (PoE)
PD Port Input| 95W Max
PoE Power Output| 48-55V DC Max 30W per port
Operating Temperature Range| -4° to 140’F (-20′ to 60°C)
Storage Temperature Range| -40° to 176°F (-40′ to 80’C)
Operating Humidity Range| 10 to 90% RH. non-condensing
Storage Humidity Range| 5 to 90% RH. non-condensing
Surge Protection| Differential Mode: :0.–.. 4KV Common Mode: t 6KV
MTBF| > 50.000 hours
Electrostatic Standard| Contact: 6KV Air 8KV
Weather Rating| IP67
Impact Protection Rating| IK10
Warranty and Product Registration
3-Year Limited Warranty
Tripp Lite warrants its products to be free from defects in materials and
workmanship for a period of three (3) years from the date of initial purchase.
Tripp Lite’s obligation under this warranty is limited to repairing or
replacing (at its sole option) any such defective products. To obtain service
under this warranty, you must obtain a Returned Material Authorization (RMA)
number from Tripp Lite or an authorized Tripp Lite service center. Products
must be returned to Tripp Lite or an authorized Tripp Lite service enter with
transportation charges prepaid and must be accompanied by a brief description
of the problem encountered and proof of date and place of purchase. This
warranty does not apply to equipment, which has been damaged by accident,
negligence or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, Tripp Lite MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Some states do not permit limitation or exclusion of implied warranties;
therefore, the aforesaid limitation(s) or exclusion(s) may
not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL Tripp Lite BE LIABLE FOR DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE
OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Specifically, Tripp Lite is not liable for any costs, such as lost profits or
revenue, loss of equipment, loss of use of equipment, loss of software, loss
of data, costs of substitutes, claims by third parties, or otherwise.
PRODUCT REGISTRATION
Visit tripplite.com/warranty today to register your new Tripp Lite product.
You’ll be automatically entered into a drawing for a chance to win a FREE
Tripp Lite product!
** No purchase necessary. Void where prohibited. Some restrictions apply. Open
to U.S. residents only. See tripplite.com for details.
FCC Notice, Class B
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the user’s authority to operate this equipment.
WEEE Compliance Information for Tripp Lite Customers and Recyclers
(European Union)
**** Under the Waste Electrical and Electronic Equipment (WEEE) Directive and
implementing regulations, when customers buy new electrical and electronic
equipment from
Tripp Lite, they are entitled to:
- Send old equipment for recycling on a one-for-one, like-for-like basis m(this varies depending on the country)
- Send the new equipment back for recycling when this ultimately becomes waste
Use of this equipment in life support applications where failure of this
equipment can reasonably be expected to cause the failure of the life support
equipment or to significantly affect its safety or effectiveness is not
recommended.
Tripp Lite has a policy of continuous improvement. Specifications are subject
to change without notice. Photos and illustrations may differ slightly from
actual products.
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
21-06-161 933F47_RevX1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>