D-Link DMS-106XT 6-Port Multi-Gigabit Unmanaged Switch Installation Guide
- June 6, 2024
- D-Link
Table of Contents
6-PORT MULTI-GIGABIT UNMANAGED SWITCH
DMS-106XT
QUICK INSTALLATION GUIDE
INSTALLATIONSANLEITUNG
Connect the Switch to Your Network
Installation & Setup
Step 1
Plug the supplied power adapter into the DMS-106XT and the other end into a
power outlet, power strip, or surge protector (recommended). Verify that the
Power indicator is lit on the switch.
Step 2
If your switch will be up-linking to your existing gateway/router/ firewall,
connect another Ethernet cable from your gateway/router/ firewall LAN port to
an available port on your switch.
Step 3
Connect one end of an Ethernet cable into the device you want to connect to
the switch and the other end into one of the Ethernet ports on the switch.
Check the Link lights (LEDs) on the switch to verify a proper connection.
Step 4 (optional)
Turn on TURBO mode to enable low latency and multicast function to make your
network efficient for multi-media applications (e.g. gaming, video streaming
or file download.. etc).
The port-based QoS will be activated as well when TURBO mode is on. The user
may connect the device to the desired port. Port 1 & Port 6> Port 2> Port 3>
Port 4>Port 5
(Port 6 10GE uplink port has the highest priority as Port 1).
If you just need normal data transmission, leave the switch in standard mode to enable excellent performance in a Wi-Fi 6 network.
Cables and Speeds
The following table describes the network cables that you can use for the switch connections and the speeds that these cables can support, up to 328 feet (100 meters).
| Speed | Cable Type |
|---|---|
| 100 Mbps | Category 5 (Cat 5) or higher rated |
| 1 Gbps, 2.5 Gbps, or 5 Gbps | Category 5e (Cat 5e) or higher rated |
| 1 Gbps, 2.5 Gbps, or 5 Gbps | Category 6A (Cat 6A) or higher rated |
Rear Panel Description
DC Power Jack:
Power is supplied through an external AC power adapter. Check the technical
specification section for information about the AC power input voltage.
TURBO mode:
This button is to enable advanced functions, including low latency mode,
multicast function, and Port-based QoS for multi-media services.
LED ON/OFF:
This is to turn off the POWER and LAN status LEDs.
LAN Ports:
Port 1 to 5 supports 2.5G Multi-gigabit Ethernet. Port 6 support 10G Multi-
gigabit Ethernet.
http://www.dlink.com/resources/business
TECHNICAL SUPPORT
dlink.com/support
DMS-106XT
Ver. 1.00(WW)_130x183 2021/04/20
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>