MONSTER MTSIM Chair Universal Mount Collective Instruction Manual
- June 4, 2024
- Monster
Table of Contents
Instruction Manual
GENERAL ASSEMBLY INFO AND HOW TO
PROFILE SLOT NUT
HEX KEY SET WITH BALL HEAD + EXTENSION OR SIMILAR REQUIRED
UNIVERSAL CONNECTOR
ALTERNATIVE
BOLT DIMENSIONS AND HOW TO MEASURE THEM [mm]
PROFILE CAP ASSEMBLY
PARTS
[dimensions in mm / different scales] No extra or spare parts listed!
BAG 2
BAG 3 (VPC ROTOR ONLY)
ADDITIONAL PARTS FOR CHAIR MOUNT
Attachment plate as ordered.
Additional screw bag as shown in CHAIR-MOUNT MANUAL.
MOUNTING THE SEAT ATTACHMENT ON MONSTERTECH FLIGHT CHAIRS
ASSEMBLY WITHOUT ARMREST
ASSEMBLY ON EXISTING CHAIR-MOUNT (ADD-ON)
MOUNTING A VPC ROTOR
MOUNTING A WINNING COLLECTIVE
**** WARNING NOTICES
CAUTION! Do not clamp your fingers while attaching the universal
collective mount.
CAUTION! Check before usage if all screws are tightened.
DANGER: Contains small parts not suitable for children under 3 years. Only
suitable for children over 12 years and adults.
All MTSIM products are hand assembled and quality checked. The mount is
designed for usage only with a computer controller (e.g. joystick or
throttle).
We exclude liability if the product is used for purposes other than intended.
MTSIM shall be liable for damage arising from causes other than the detriment
to life, body and health only to the extent that such damage arises from
wilful misconduct, gross negligence, or the culpable violation of a
fundamental contractual obligation on the part of MTSIM or a vicarious agent
(e.g. the delivery service) of MTSIM.
Any further liability for damages shall be excluded.
If you have safety concerns or questions regarding assembly, contact us at
[email protected] or visit
www.mtsim.com/en/