lifelines Trackit-F Flexible Video EEG Monitoring Solution User Guide
- June 6, 2024
- lifelines
Table of Contents
**lifelines Trackit-F Flexible Video EEG Monitoring Solution User Guide
**
Setup Instructions
A. Open the case
B. Plug into electrical outlet
On the right side of the case you will find the power cord wrapped up and
tucked into the insert. Remove this and plug into an electrical outlet.
C. Remove camera from case
Inside the case, next to the main power cord you will find the camera. Remove
the camera (PTZ or Trackit Cam) from the case, being careful to watch the cord
as you remove it.
D. Remove camera clamp from case
Remove the camera clamp or optional tripod from the case and attach it to the
camera.
E. Plug in the Trackit Cam
Plug the Trackit Cam directly into the PC USB port (photo). Do not use the
Trackit F USB hub port.
F. Plug in PTZ Camera
Plug in power cord and ethernet cable to the rear of PTZ.
G. Turn on the computer
Turn on the computer using the power button on the right side of the laptop.
H. Turn on the amplifier
Turn on the amplifier and connect it via the acquisition software.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>