lifelines Trackit 24 Trackit Plus Monitoring User Guide
- June 4, 2024
- lifelines
Table of Contents
lifelines Trackit 24 Trackit Plus Monitoring
The Video Recording Window
- For Video Recordings:
- a. The title of the Video Window should be ‘Trackit Video Recording’.
- b. When not recording, the title will be ‘Trackit Preview (Not Recording)’
- Date/Time should match the date/time displayed in the Trackit Plus software in the lower-right corner of the program’s window. Any difference should be less than 2-3 seconds.
- The Video Window should be the size in this example and should be recording without freezes, stutters, or other visual defects.
- Video Title/ Frame Data
- a. Video feed should be labeled with the correct patient’s ID.
- b. The frame count should be counted upward. Dropped frames are expected but should not exceed 10% of the current total frame count.
The Trackit Plus Footer
-
Patient ID/Connection Status
- a. The correct Patient ID should be displayed and should match the video label in item 4.
- b. The bottom field should be displaying ‘Online’ and the amplifier’s model. The amplifier would need to be within Bluetooth range and connected to the laptop’s Bluetooth receiver – or this status will not display.
-
Recording Status
- a. For Dual Recordings – both Trackit and PC should be listed as ‘Record ON’. Ambulatory recordings will only display ‘Trackit’, and PC recordings will only display ‘PC’.
- b. PC Rec – should display the total time that the current PC study has been recording (Only for Dual/PC recordings)
- c. Date/Time: Should match system time.
-
Ensure that the laptop is plugged in, and that the battery is charging properly.
The Amplifier Control Panel -
Open the Amplifier Control Panel
- In the Trackit A Tab, Verify – Record: On / Flash Card: Yes / Battery: Yes
- In the Trackit B Tab, note the values for your logs as needed. The Recording Time should match the number of hours/minutes that the study has been in progress. The battery percentage should be monitored until completion of the study.
The Patient Folder
- Patient Folder – Navigate to the current Patient’s Folder
- a. For a PC or Dual Recording – The following file types: .bdf/ .tev/ .tvx/ should be present and named according to the Patient ID. The BDF’s file size should increase throughout study – refresh or re-open the folder to confirm.
- b. Completed video segments should be of similar file size, with one. TVS file per Video File. The most recent video segment should increase in file size.
Read User Manual Online (PDF format)
Loading......