SUNSKY S22 WiFi Intelligent Solar Energy Alert PTZ Camera User Manual

Wifi Intelligent Solar Energy
Alert PTZ Camera
User Manual
V2.1

PRODUCTS & PACKING LIST

Product Diagram

1.3 Quick Setup

1. Insert the USB cable of the solar panel to the ‘USB” Silicon Flap on the bracket base for battery charging.
2. Press the Power switch to turn ON/OFF the camera,
3. Wait for the voice prompt step by step for pairing the camera with the APP.

1.4 Note:

1. Before you turn on the camera, please close the silicon flap to avoid rain leakage.
2. Make sure your phone is connecting to the 2.4Ghz wifi firstly before you pair the camera.

INSTALLATION

1. Integrated installation
2. Separated installation

APP INSTALLATION

3.1. Scan the following OR codes or search for “LIBox” from the App Store(for iOS devices) or Google Play Store (for Android smartphones) to download and install the app.

https://apps.apple.com/cn/app/ubox/id1436112326
https://play.google.com/store/apps/details?id=cn.ubia.ubox

3.2. APP REGISTRATION

1. Open the app then input your E-mail address then press ‘Register. Check and select to agree on the agreement then your E-mail box will get a verification code.( For better users experience, please allow to open all permissions to avoid missing any notifications from the app.)
2. Input the Verification code” and press ‘Next (if you did not find the mail you might find the code in your email spam box. )
3. Set the login password and confirm the login password. Then press ‘Register’ to the next step.(For your password safety, the password requires more than 8 characters plus a combination of letters)
4. Enter your E-mail address, and input your login password. Then press ‘Login’.

WI-FI CONNECTION

1. Press ‘Add Family then set the room or position as per reminders.
2. Enter your family name and then press ‘Next’.
3. Input the necessary information just like Country. Province, then press tone’.
4. Press ‘Add a device’ to add a smart device
5.  Connect the device with a power supply, and make sure your mobile phone is connected to an available Wi-Fi. Then press ‘Setup device’
6. After the power on the device, wait for the blue LED and voice prompt The device is waiting for pairing. This means your device is in pairing mode.
7. If you did not hear the voice prompt, please press the RESET button until the blue indicator lights up and then release it. The device will reboot and enter the pairing state.
8. The app will input the Wi-Fi name automatically, please input the correct VVi-Fi Password. Then you can choose the OR code configuration’ or ‘Sound wave configuration’.
9. Sound wave configuration: Make sure the camera and mobile phone are within 1M distance,you will hear the wave sound DI Dl, follow the tips shown in the mobile to finish the configuration.
10. OR code configuration: Select the OR code configuration then the mobile phone display a QR code. Use the device to scan to the OR code 10cm away from the mobile phone.
11. Select the family name or device location then press ‘Done.
12. The device will enter to the device list automatically. Setup success! The device is ready to use

DEVICE SETTING

SPECIAL NOTES

1. The device is equipped with a rechargeable lithium battery. The battery Ede win be affected by the device wake-up time and the number of wake-ups. Therefore, the PIR sensor alarm detection function is used in an environment with a lot of people. It is recommended to turn off or set the device to low sensitivity to reduce device wake-up and call times extend battery life. When the battery is low, please charge My the battery immediately.
2. Keep the device in the range of your router. Make sure the device is placed dose to the Wi-Fi router. If there has to be thick or insulated objects between the device and the Wi-Fi router, which may lead to a weak Wi-Fi signal, please make sure the Wi-Fi signal is in a good level before you start using the device.
3. Is a dedicated device with low power consumption design. Every time the device Is awakened and will work for a few seconds. Mer that. the device will enter sandy mode to save power. You can set the work time in the app settings.
4. Because mainland China does not receive Google’s system push messages, you need to Wen the app’s self-starting function in your phone to receive push messages.
5. This device provides one month of free cloud storage services. If you need to continue using value-added services after the trial period expires. you need to purchase them in the app.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>